The Legend™ 230SR Beam Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and
for
more details.
Disclaimer
The information and specifications contained in this QRG are subject to
change without notice.
Safety Notes
•DO NOT open this product. It contains no user-serviceable parts.
The maximum ambient temperature is 104° F (40° C). Do not operate
this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
for
contact information.
What Is
Included
• Legend™ 230SR Beam
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
4. Screw the fuse hold er cap back in place and reconnect power.
Guide
DMX values. Download the User Manual from www.chauvetpro.com
• DO NOT look at the light source when the product is on.
• CAUTION: This product’s housing is hot when lights are operating.
• CAUTION: This product’s beam is hot when l ights are operating. Be
careful not to aim at fire sprinklers or alarms when in use.
•Mount this product in a location with adequate ventilation, at le ast
40 ft (12.2 m) from objects to be lit.
•DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket or the handles to carry this
product. Do not carry by the moving head.
• In the event of a serious operating problem, stop using immediately.
•
request support or return a product. Visit www.chauvetlighting.com
• 2-Omega Bracket
• Warranty Card
• Quick Reference Guide
1. Disconnect this product from power.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove blown fuse and replace with a fuse of the same type and
rating.
2
EN Legend™ 230SR Beam QRG
Lamp
Replacement
9. Reverse the steps above to install the new lamp.
the User Manual for more detailed instructions with
DMX Linking
The Legend™ 230SR Beam will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
DMX Connection
The Legend™ 230SR Beam uses a regular DMX data connection for its
. See the User Manual to
connect and configure for DMX operation.
¼-turn
screws
1. Turn the fixture off and disconnect it from power.
2. Wait at least 15 minutes for the lamp to cool down.
3. Remove both head covers by removing 8 Phillips-head ¼-turn screws.
4. Orient the rear of the product so that the fan is facing upward.
5. Remove the 2 Phillips-head screws on th e s ides of the fan assembly.
6. Roll the fan assembly to the right to expose the lamp.
7. Using the lamp base, push the lamp down against the spring clips
located on the bottom, then roll the lamp out the top.
8. Remove the 2 wires connected to the lamp by the spade connectors.
Please refer to
images.
Phillips-head
DMX personalities: 15- and 18-channel modes
3
Legend™ 230SR Beam QRG EN
Mounting
Control Panel
Button
Function
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value into th e s elected function
Navigates upwards through the menu list and increases the
numeric value when in a function
Navigates downwards through the menu list and decr eas es
the numeric value when in a function
Secure the safety cable using
the passageway on the
bottom of the product
Overhead Mounting
Floor Mounting
Product
Mounting
Diagram
Description
<ENTER>
<UP>
<DOWN>
4
EN Legend™ 230SR Beam QRG
Main Level
Programming Levels
Description
DMX Address
001~512
Selects a s tarting DMX address
Mode 1 (15)
Selects the 15-channel DMX mode
Mode 2 (18)
Selects the 18-channel DMX mode
Shows current DMX values for each
channel
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
OFF
ON
OFF
Defines the status of lamp when powering
ON
No
Yes
No
Yes
No
Yes
Selects duration of delay between product
power on and lamp power on
Selects the duration of delay when shutter
state
No
Yes
No
Display backlight always on
Yes
Display backlight turns off after 1 minute
Backlight Intensity
1~10
Selects backlig ht intensit y from 1~10
°C
°F
Menu Options
DMX Functions
Fixture Setting
Lamp Setting
DMX Channel
Mode
View DMX Value
Pan Inverse
Tilt Invers e
P/T Feedback
Bl.o. P/T Moving
Bl.o. Color Change
Bl.o. Gobo Change
On/Off
State/Power On
Off Via DMX
On if DMX On
Off if DMX Off
Defines the direction of the pan function
Defines the direction of the tilt function
Defines auto corr ec t function
Defines the pan/tilt move-in black delay
Defines the color change move-in black
delay
Defines the gobo change move-in black
delay
Turns lamp on/off
up product
Turns off the unit via DMX controller
Turns lamp on when DMX signal is
detected
Turns lamp off whe n DMX signal is lost
Ignition Delay 000~255S
Low Power Delay 000~255S
Display Inverse
Display Setting
Backlight Auto Off
Temperature Unit
is closed and lamp enters lower power
Defines the direction of the display
Defines how temperature is displayed
5
Legend™ 230SR Beam QRG EN
Main Level
Programming Levels
Description
Selects the product’s automatic test
sequence
Manual Test
Selects the product’s manual test function
Fixture Use Time
Displa ys total hou rs of produc t s use
Displays the amount of time the lam p has
been on
Reset Time
Resets lam p timer to 0
Firmwar e Version
Displays the firmware version
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Defines amount of hours between
maintenance
Shows amount of time remaining in
maintenance cycle
Reset Time
Resets maintenance timer
No
Yes
Menu Options (cont.)
Fixture Test
Fixture Information
Reset Functions
Special Functions
Lamp On Time
Pan/Tilt
Shutter/Prism
Zoom/Frost/Focus
Fixture
Maintenance
Factory Setting
Auto Test
Color
Gobo
All
Interval 10~300 h
Remain
Time
Exit
Resets pa n/tilt f unctions to home posi t ion
Resets shutter/prism functions to home
position
Resets color wheel to home position
Resets gobo wheel to home position
Resets pa n/tilt f unctions to home posi t ion
Resets all functions to home position
Exit
Sets product back to default factory
settings
6
EN Legend™ 230SR Beam QRG
Mode 1
Channel
Function
Value
Percent/Setting
1
Pan
000 ó 255
0~100%
2
Fine Pan
000 ó 255
0~100%
3
Tilt
000 ó 255
0~100%
4
Fine Tilt
000 ó 255
0~100%
5
Pan/Tilt Speed
000 ó 255
0~100%
6
Dimmer
000 ó 255
0~100%
000 ó 007
248 ó 255
No Function
Open
000 ó 004
194 ó 255
Open
Counter-clockwise rotation, slow to fast
000 ó 003
046 ó 048
Open
Gobo 15
DMX Values
7 Shutter
8 Color Wheel
9 Gobo Wheel
008 ó 015
016 ó 131
132 ó 167
168 ó 203
204 ó 239
240 ó 247
005 ó 008
009 ó 012
013 ó 016
017 ó 020
021 ó 024
025 ó 028
029 ó 032
033 ó 036
037 ó 040
041 ó 044
045 ó 048
049 ó 052
053 ó 056
057 ó 060
061 ó 127
128 ó 189
190 ó 193
004 ó 006
007 ó 009
010 ó 012
013 ó 015
016 ó 018
019 ó 021
022 ó 024
025 ó 027
028 ó 030
031 ó 033
034 ó 036
037 ó 039
040 ó 042
043 ó 045
7
Open
Slow to fast (strobe)
Fast close/slow open
Slow close/fast open
Slow to fast (pulse effect)
Random strobe
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Index/split color
Clockwise rotation, fast to slow
Stop
052 ó 055
056 ó 059
060 ó 063
064 ó 067
068 ó 071
072 ó 075
076 ó 079
080 ó 083
084 ó 087
088 ó 091
092 ó 095
096 ó 099
100 ó 103
104 ó 107
108 ó 111
112 ó 115
116 ó 119
120 ó 123
124 ó 127
128 ó 189
190 ó 193
030 ó 039
040 ó 049
050 ó 059
060 ó 069
070 ó 079
080 ó 089
090 ó 099
100 ó 109
110 ó 119
120 ó 129
130 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
8
Dimmer conventional mode
Dimmer linear mode
Pan/tilt fast mode
Pan/tilt normal mode
Pan/tilt blackout mode enabled
Pan/tilt blackout mode disabled
Color change blackout mode enabled
Color change blackout mode disabled
Gobo change blackout mode enabled
Gobo change blackout mode disabled
Lamp On
Pan/ti lt reset
Color reset
Gobo reset
Shutter/prism reset
No Function
Frost/focus/zoom reset
EN Legend™ 230SR Beam QRG
Mode 1
Channel
Function
Value
Percent/Setting
210 ó 219
240 ó 255
Enable all movement blackout modes
No Function
Mode 2
Channel
Function
Value
Percent/Setting
1
Pan
000 ó 255
0~100%
2
Fine Pan
000 ó 255
0~100%
3
Tilt
000 ó 255
0~100%
4
Fine Tilt
000 ó 255
0~100%
5
Pan/Tilt Speed
000 ó 255
0~100%
6
Dimmer
000 ó 255
0~100%
7
Fine Dimmer
000 ó 255
0~100%
000 ó 007
248 ó 255
No Function
Open
000 ó 004
194 ó 255
Open
Counter-clockwise rotation, slow to fast
000 ó 003
028 ó 030
Open
Gobo 9
DMX Values (cont.)
(cont.)
15
Control
(cont.)
8 Shutter
9 Color Wheel
10 Gobo Wheel
220 ó 229
230 ó 239
008 ó 015
016 ó 131
132 ó 167
168 ó 203
204 ó 239
240 ó 247
005 ó 008
009 ó 012
013 ó 016
017 ó 020
021 ó 024
025 ó 028
029 ó 032
033 ó 036
037 ó 040
041 ó 044
045 ó 048
049 ó 052
053 ó 056
057 ó 060
061 ó 127
128 ó 189
190 ó 193
004 ó 006
007 ó 009
010 ó 012
013 ó 015
016 ó 018
019 ó 021
022 ó 024
025 ó 027
9
Disable all movement blackout modes
Lamp off
Open
Slow to fast (strobe)
Fast close/slow open
Slow close/fast open
Slow to fast (pulse effect)
Random strobe
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Index/split color
Clockwise rotation, fast to sl ow
Stop
034 ó 036
037 ó 039
040 ó 042
043 ó 045
046 ó 048
049 ó 051
052 ó 055
056 ó 059
060 ó 063
064 ó 067
068 ó 071
072 ó 075
076 ó 079
080 ó 083
084 ó 087
088 ó 091
092 ó 095
096 ó 099
100 ó 103
104 ó 107
108 ó 111
112 ó 115
116 ó 119
120 ó 123
124 ó 127
128 ó 189
190 ó 193
128 ó 189
190 ó 193
008 ó 015
016 ó 023
024 ó 031
032 ó 039
040 ó 047
048 ó 055
056 ó 063
064 ó 071
072 ó 079
096 ó 103
104 ó 111
112 ó 119
120 ó 127
128 ó 135
136 ó 143
144 ó 151
152 ó 159
160 ó 167
168 ó 175
176 ó 183
184 ó 191
192 ó 199
200 ó 207
208 ó 215
216 ó 223
224 ó 231
232 ó 239
240 ó 247
000 ó 255 0~100%
030 ó 039
040 ó 049
050 ó 059
060 ó 069
070 ó 079
080 ó 089
090 ó 099
100 ó 109
110 ó 119
120 ó 129
130 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 209
210 ó 219
220 ó 229
230 ó 239
Dimmer conventional mode
Dimmer linear mode
Pan/tilt fast mode
Pan/tilt normal mode
Pan/tilt blackout mode enabled
Pan/tilt blackout mode disabled
Color change blackout mode enabled
Color change blackout mode disabled
Gobo change blackout mode enabled
Gobo change blackout mode disabled
Lamp on
Pan/ti lt reset
Color reset
Gobo reset
Shutter/prism reset
No Function
Frost/focus/zoom reset
Reset all
Enable all movement blackout modes
Disable all movement blackout modes
Lamp off
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.