How it Works
Chauvet
Loading...
15090394
User Manual
12 pgs1.02 Mb0

Chauvet 15090394 User Manual

Download
Page 1
User Manual
Page 2
TABLE OF CONTENTS
1. Before You Begin................................................................................3
Claims ................................................................................................................... 3
2. Introduction.........................................................................................5
3. Setup ...................................................................................................6
Fuse Replacement ................................................................................................. 6
Orientation ............................................................................................................. 7
Rigg ing .................................................................................................................. 7
4. Operation ............................................................................................8
Starting Address .................................................................................................... 8
Sound-Active Mode ................................................................................................ 9
Automatic Mode ..................................................................................................... 9
8-CH .................................................................................................................... 10
5. Technical Information ......................................................................11
Pag e 2 of 12 MotionFaçade™ LED User Manual (Rev. 10)
Page 3
What Is
Unpacking
Instructions
and any other accessory included) appears damaged
of the damaged merchandise. Failure to do so in a timely
manner may invalidate your claim with the carrier. In addition, retain the container and
lated to shipping,
Text
Convention
Meaning
1~512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Icons
Icon
Meaning
Critical installation, configuration, or operation information. Failure
damage it, or cause harm to the operator.
Important installation or configuration information. Failure to
correctly.
Document
The information and specifications contained in this document are subject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or
CHAUVET® reserves the right to update the
1. BEFORE YOU BEGIN
Included
Claims
Conventions
• MotionFaçade™ LED
• MotionFaçade™ Controller
• Power Cord
• Signal Cable
• Carrying Bag
Imm ediately upon receipt, carefully unpack this product and check the container to make sure you have received all the parts indicated above in good condition.
If the box or contents (this product from shipping, or shows signs of mishandling, notify the carrier immediately, not CHAUVET®, upon receipt
all the packing material for inspection.
For other issues such as missing components or parts, damage not re or concealed damage, file a claim with CHAUVET® within 7 days of receiving the merchandise.
• Replacement LEDs
• 2m Velcro
• Reusable Zip Ties (Tie Wraps)
• Warranty Card
• Quick Reference Guide
to comply with this information may cause the product not to work,
comply with this information may keep the product from working
Useful information.
Information
omissions that may appear in this manual. existing document or to create a new document to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author Date Editor Date
A. Diaz 5/18/12 S. Diaz 8/6/12
MotionFaçade™ LED User Manual (Rev. 10) Pag e 3 of 12
Page 4
Product at a
Safety Notes
Do not touch this product’s housing when operating because it may be very hot.
Use on Dimmer
Glance
Outdoor Use
Sound Activated
DMX
Master/Slave
Please read the following Safety Notes carefully before working with this product. They include important safety information about its installation, usage, and maintenance.
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect this product from the power source before cleaning it or replacing
the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power cord by pulling or tugging on the cord.
• Make sure there are no flammable materials close to the unit while operating.
•
• Always make sure that the voltage of the outlet to which you are connecting this
product is within the range stated on the decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.
• Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the unit’s housing are blocked.
• Never connect this product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry this product from the power cord or any moving part.
• The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at higher temperatures.
• In the event of a serious operating problem, stop using the unit immediately.
• Never try to repair this product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
• This product is NFPA-certified fire retardant material.
• Keep this User Manual for future consultation. If you sell this product to another user,
be sure that they also receive this document.
Pag e 4 of 12 MotionFaçade™ LED User Manual (Rev. 10)
Page 5
2. INTRODUCTION
Product Overview
Front Panel
Button Menu
LED Display
Top Panel
Curtain Input
Power In
Fuse holder
On/Off Switch
DMX Out
DMX In
Product Dimensions
MotionFaçade™ LED User Manual (Rev. 10) Pag e 5 of 12
Page 6
ranging power supply and it can work with an input voltage
(circuit breaker, power outlet, and
an appropriate electrical ground to avoid the risk of
a rheostat (variable resistor) or dimmer circuit, even
Fuse
Installed fuse (held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap
3. SETUP
AC Power
Replacement
This product has an auto­range of 100~240 VAC, 50/60 Hz.
To determine the power requirements for this product wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse), making sure that it has electrocution or fire.
Never connect this product to if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Follow the instructions below to change the fuse in the control box, if necessary.
Disconnect this product from the power outlet before replacing the fuse.
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder and pry out of its housing.
2. Remove the blown fuse from its holder and replace with a fuse of the exact same type and rating.
3. Insert the fuse holder back into place, and reconnect power.
This product ships with no spare fuse. The safety cap does have room for a spare.
Always replace a blown fuse of the same type and rating.
Pag e 6 of 12 MotionFaçade™ LED User Manual (Rev. 10)
Page 7
Mounting
, read and follow the safety recommendations indicated in
may be mounted in any position; however, make sure
Rigging
, always make sure that it will be easy to
can support its
section of this manual for weight
Reusable zip ties (tie wraps) are provided with the MotionFaçade™ LED for quick and
Text here
Grommets for easy truss
Before mounting this product the Safety Notes section (page 2 of this manual).
Orientation
Mounting Diagram
The MotionFaçade™ LED adequate ventilation is provided around the product.
Before deciding on a location for this product access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product weight. Please see the Technical Specifications information.
Mount the product securely to a rigging point, whether an elevated platform or a truss.
easy mounting.
mounting and various
stand applications
MotionFaçade™ LED User Manual (Rev. 10) Pag e 7 of 12
Page 8
the control panel functions, use the four buttons located underneath the
) to see the buttons location on the
Button
Function
<ENTER>
<UP>
Press to scroll up the list of options or to find a higher value
Menu Map
NO
When selecting a starting DMX address, always consider the number of DMX channels
choose a starting address that is too high, you
download the DMX Primer from
4. OPERATION
Control Panel
Operation
Configuration
(DMX)
To access display. Please refer to the Product Overview (page 5 control panel.
<MENU>
<DOWN> Press to scroll down the list of options or to find a lower value
Mode Programming Steps Description
Version Software Version Shows the software version number
Automatic
Sound
DMX Mode
Speed 1~9
Program 1~30
Set this product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket of the product.
Press to find an operation mode or to back out of the current menu option
Press to activate a menu option or a selected value
Disables unit’s auto mode function
YES Enables unit’s auto mode function
NO Disables unit’s sound mode function
YES Enables unit’s sound mode function
NO Disables unit’s DMX512 mode function
YES 1~512
NO
YES
Enables unit’s DMX512 mode and sets starting address
Selects how fast the auto mode program runs
Disables numbered program running in sequence in auto or sound mode
Enables numbered program running in sequence in auto or sound mode
Starting Address
the selected DMX mode uses. If you could restrict the access to some of the product’s channels.
The MotionFaçade™ LED uses up to 8 DMX channels in its 8-channel DMX mode, which defines the highest configurable address to 505.
Pag e 8 of 12 MotionFaçade™ LED User Manual (Rev. 10)
If you are not familiar with the DMX protocol,
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until Dmx512 shows on the display.
2. Press <ENTER>.
3. Press <UP> to select Yes in the menu.
4. Press <ENTER>. Address should appear on the screen.
5. Use <UP> or <DOWN> to select the starting address.
6. Press <ENTER>.
Page 9
Configuration
that is operating in any standalone mode, whether Static,
Automatic, or Sound to a DMX string connected to a DMX controller. This is
s in standalone mode may transmit DMX signals that could
Sound-Active
Master/Slave
This mode allows a single unit (the “master”) to control the actions of one or more units
be set to
operate in Slave Mode. Once set and connected, the slave units will operate in unison
Wait until all the slave units are configured and connected before connecting the
operation because it may interfere with the signals from the master unit.
(Standalone)
Mode
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product
because product interfere with the DMX signals from the controller.
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Sound shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Yes.
4. Press <ENTER>.
5. Turn the music on until the product responds to the beat of the music.
The product will only respond to low frequencies of the music (bass and drums).
Automatic Mode
Mode
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until Automatic shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Yes.
4. Press <ENTER>.
(the “slaves”) without the need of a DMX controller. The master unit will operate in either Automatic or Sound-Active m ode, while the slave units will be set to
with the m aster unit. Configure the units as indicated below. Slave units:
1. Press <MENU> repeatedly until 8-CH shows on the display.
2. Press <ENTER> to accept.
3. Use <UP> or <DOWN> to select the starting address to: d001.
4. Press <ENTER>.
5. Connect the DMX input of the first slave unit to the DMX output of the master unit.
6. Connect the DMX input of the subsequent slave units to the DMX output of the previous slave unit.
7. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound-Active mode.
2. Make the master unit the first unit in the DMX daisy chain.
master unit to the DMX daisy chain.
Never connect a DMX controller to a DMX string configured for Master/Slave
Do not connect more than 31 slave units to the master unit.
The MotionDrape™ and MotionFaçade™ can also be used together in this mode with the same configuration.
MotionFaçade™ LED User Manual (Rev. 10) Pag e 9 of 12
Page 10
DMX Channel Assignments and Values
8-CH
000 007
No function
008 255
0~100%
000 010
No function
011 255
0~100%
3
Red
000 255
0~100%
4
Green
000 255
0~100%
5
Blue
000 255
0~100%
000 015
No function
016  031
Falling Star
032 047
Diagonal Color Bands
048 063
Color Pattern Chase
064 079
Inward Arrow (L-R)
080 095
Color Stack
096 111
Multi-Color Freeway
112 127
Color W ave (L-R)
128 143
Color W ave (R-L)
144 159
Color Bar Chase (L-R)
160 175
Color Bar Chase (R-L)
176 191
Windmill
192 207
Fan
208 223
Whirlpool
224 239
Falling Snow
240 255
Multi Box Frenzy
000  015
No function
016 031
Center Burst
032 047
Outer Burst
048 063
EQ Effect
064 079
Rolling C olor
080 095
Horizontal St acking
096 111
Inner Zone
112 127
Outer Zone
128 143
Diamond Spread
144 159
Single Diamond Squeeze
160  175
Follow The Leader
176 191
Crisscross
192 207
X-Fac tor
208 223
Double Diamond Squeeze
224 239
Red X Fact or
240 255
Multicolor Rain
8
Speed
000 255
0~100%
Channel Function Value Setting
1 Dimmer
2 Strobe
6 Programs 1-15
7 Programs 16-30
Pag e 10 of 12 MotionFaçade™ LED User Manual (Rev. 10)
Page 11
Dimensions and
Length (Drape)
Width (Drape)
Height (Drape)
Weight (Drape)
6.6 ft (78.7 in) 2 m (2,000 m)
4 ft (48 in)
1.2 m (1,220 mm)
Length (Contr ol Box)
Width (Control Box)
Height (Control Box)
Weight (Contr ol Box)
9.6 in (243 mm)
5.3 in (135 mm)
2 in (50 mm)
1.8 lbs (0.8 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 H z
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
21 W
23 W
Operating
0.2 A
0.1 A
Fuse
F 2 A, 250 V
F 2 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U S)
Local plug
Light Source
Type
Quantity
Lifespan
LED
66
50,000 hours
Thermal
Maximum External Temp.
Cooling System
104° F (40° C)
Convection
DMX
I/O Connector s
Connector Type
Channel Range
3-pin XLR
Sockets
8
Ordering
Product Name
Item Code
Item Number
MotionFaçade™ LED
15090394
MOTIONFACADELED
5. TECHNICAL INFORMATION
Technical Specifications
Weight
0.6 in (15 mm)
3.9 lbs (1.7 kg)
MotionFaçade™ LED User Manual (Rev. 10) P age 11 of 12
Page 12
Contact Us
Fax: +44 (0)1773 511110
Email: tech@chauvetlighting.com
www.chauvetlighting.com
www.chauvetlighting.co.uk
s to
Tech Support office and request a Return
prepared to
provide the model number, serial number, and a brief description of the cause for the
You must send the merchandise prepaid, in its original box, and with its original packing
the following information on a piece of paper
properly. Any shipping damage resulting from inadequate
reserves the right to use its own discretion to repair or replace
In case you need to return a product or request support, follow the procedure below:
• If you live in the U.S., contact CHAUVET® World Headquarters.
• If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.
• If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your
distributor of record. Refer to our website for contact details of distributors outside the U.S., United Kingdom, or Ireland.
Returns
World Headquarters
CHAUVET® General Information
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 929-1115 Fax: (954) 929-5560 Toll free: (800) 762-1084
Technical Support
Voice: (954) 929-1115 (Press 4)
Fax: (954) 756-8015
World Wide Web
United Kingdom & Ireland
CHAUVET® Eur ope Ltd. General Information
Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web
If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of record and follow their instructions on how to return CHAUVET® product them. Visit our website for contact details.
Call the corresponding CHAUVET® Merchandise Authorization (RMA) number before shipping the product. Be
return.
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.
Before sending the product, clearly write and place it inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem
Be sure to pack the product packaging will be your responsibility. Proper FedEx packing or double-boxing are recommended.
CHAUVET® returned product(s).
Pag e 12 of 12 MotionFaçade™ LED User Manual (Rev. 10)
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use