xbi2_maual.indd 2 4/15/09 3:40:36 PM
2
xbi2_maual.indd 3 4/15/09 3:40:38 PM
ChatterBox! strives to provide our customers with powerful
and reliable communication systems that offer state-of-the-
art technology and cutting edge design. Every communica-
tion system in the ChatterBox! product line provides unique
features and benefi ts along with communication compatibility
within the entire product range. Each ChatterBox! system is
2
xbi2_maual.indd 4 4/15/09 3:40:38 PM
1.1 OPEN FACE KIT 4
1.2 FULL FACE KIT 4
2.1 EXTERIOR DESIGN 5
2.2 DESIGN DESCRIPTION 5
2.2.1 POWER Button 5
2.2.2 MODE Button 5
2.2.3 VOLUME UP Button 5
2.2.4 VOLUME DOWN Button 5
2.2.5 INTERCOM Button 5
2.2.6 CHARGE PORT 5
2.2.7 HEADSET PORT 5
2.2.8 LED 5
3.1 GENERAL INSTALLATION 6-7
3.2 ALTERNATIVE FULL FACE XBI2 UNIT HEADSET INSTALLATION 7
4.1 CHARGING XBI2 UNIT 7-8
4.2 TURNING XBI2 UNIT ON / OFF 8
4.2.1 Turning on 8
4.2.2 Turning off 8
4.3 BATTERY LEVEL STATUS DISPLAY 8
4.4 LOW BATTERY ALERT 9
4.5 ADJUSTING XBI2 UNIT VOLUME 9
8
5.1 PUTTING XBI2 UNIT IN BLUETOOTH® PAIRING MODE 8
5.2 PAIRING XBI2 UNITS TOGETHER 9
5.2.1 Pairing 3 XBi2 units together 9
5.2.2 Pairing 2 XBi2 units together 9-10
10
6.1 BLUETOOTH® / WIRED AUDIO DEVICES 10
6.1.1 Pairing a stereo Bluetooth® adaptor 10
6.1.2 Connecting audio source via cable to AUX Port 10
6.1.3 Switching from Bluetooth® mode to AUX mode 10
6.1.4 Switching from Intercom mode to Audio mode 10
6.2 BLUETOOTH® PHONE OPERATION 10
6.2.1 Pairing a Bluetooth® compatible phone 11
6.2.2 Answering a phone call 11
6.2.3 Placing a phone call 11
6.2.4 Placing a last number dialed call 11
7.1 CONNECTING A PAIRED STEREO BLUETOOTH® ADAPTOR 11
7.2 CONNECTING A PAIRED BLUETOOTH® PHONE 11-12
7.3 CONNECTING A PAIRED STEREO BLUETOOTH® ADAPTOR AND CONNECTING A
PAIRED BLUETOOTH®PHONE AT THE SAME TIME 12
8.1 ELECTRICAL SPECIFICATION 12
8.2 PRODUCT SPECIFICATION 12
8.3 BUTTON FUNCTION SUMMARY 13
13
9.1 LIMITED WARRANTY 13
10.2 EUROPEAN CE NOTICE 14
10.3 DECLARATION OF CONFORMITY 14
10.4 WARNING 14
xbi2_maual.indd 5 4/15/09 3:40:39 PM
xbi2_maual.indd 6 4/15/09 3:40:44 PM
Secondary Function = GROUP INTERCOM pairing status
Secondary Function = charging status
Power
Intercom
Mode
Volume Up
Volume Down
Headset Port
Charge Port
LED
xbi2_maual.indd 7 4/15/09 3:40:45 PM
INSTALLATION
“C” and tighten. (Figure 1)
Slot “B”
Slot “B”
Ta
b “A”
Ta
b “A”
Screw
“D”
Threaded hole “C
”
xbi2_maual.indd 8 4/15/09 3:40:47 PM
- XBi2 Unit
BLUE LED will remain on until XBi2 is done charging
- Charger
RED LED- XBi2 is charging
GREEN LED- XBi2 is done charging
xbi2_maual.indd 9 4/15/09 3:40:49 PM
Below 3.34V 1 times ON/OFF
xbi2_maual.indd 10 4/15/09 3:40:50 PM
Third: Main
xbi2_maual.indd 11 4/15/09 3:40:50 PM
xbi2_maual.indd 12 4/15/09 3:40:50 PM
xbi2_maual.indd 13 4/15/09 3:40:50 PM
7.3 CONNECTING A PAIRED STEREO BLUETOOTH® ADAPTOR AND PAIRED
BLUETOOTH® PHONE AT THE SAME TIME
1. Turn XBi2 unit on
2. Turn on audio source and turn on or plug in stereo Bluetooth® adaptor
3. Audio source will automa tically start playing through the XBi2 unit wh en connection is complete
4. Momentarily press (approximately 1 second) and release th e Power button *
5. Bluetooth® symbol will light up on phone display
6. Press end call button on phone
* When doing this procedure some phones will try to dial the last number dialed. Once connected be prepared
to press the end call button on your phone
8. SPECIFICATION
8.1 ELECTRICAL SPECIFICATION
NO. PARAMETER BLUETOOTH® BINARY CDMA REMARK
1 FREQUENCY RANGE 2402 ~ 2480 MHz 2403 ~ 2477 MHz
2 POWER OUTPUT
3 RECEIVE SENSITIVITY - 82 dBm - 83 dBm 0.1% BER
+0dBm
CLASS 2
+10dBm
CLASS 1
4 SERVICE AREA Within 10 m Within 100 m L.O.S.
5 PROFILE HFP, HSP, A2DP
CURRENT
6
CONSUMPTION
7 OPERATING TEMP.
8.2 PRODUCT SPECIFICATION
NO. FUNCTION CONDITION SPECIFICATION REMARK
1 DC IN
2 OPERATING VOLTAGE +3.1V ~ +4.2 V
3 BATTERY Li-Polymer 630mAh
4 AUDIO POWER 120mW [max.]
5 CHARGING TIME 3 hours
6 OPERATION TEMP.
7 OPERATING TIME
50 mA 110 mA
-10 ~ +55 ℃ -10 ~ +80 ℃
-10 ~ +55 ℃
Stand-by 15-16 hours
Continuity 6-7 hours
@ 32Ω
xbi2_maual.indd 15 4/15/09 3:40:53 PM
This device has been tested and found to comply with the limits for a
xbi2_maual.indd 16 4/15/09 3:40:53 PM
To see if your audio device is A2DP.
xbi2_maual.indd 17 4/15/09 3:40:54 PM
Loading...