Chatsworth Products Wall-Mount Enclosed Systems User Manual

For small networks, provides 6 rack-mount spaces for up to 150 lb of equipment. Equipment attaches to the top of the bracket and hangs parallel to the surface of the wall. Bracket projects 12-1/4" from the wall and is only 6-1/8" high. All-alumunim construction, unassembled.

Use Fixed Wall-Mount Rack when equipment weight exceeds the load bearing capacity of a CPI Swing Gate Rack. Fixed WallMount Rack is available in three heights and three depths. Support up to 200 lb. Heavy-duty model supports up to 350 lb. Most rack shelves can be used with the Fixed Wall-Mount Rack.

Select sizes of the Fixed WallMount Rack are available with an enclosure to provide added physical security for equipment. Enclosures feature a locking door and vented top and bottom panels. A fan kit can be added to increase air changes. The enclosure can be removed when servicing equipment.

Ideal for supporting a few patch panels in a small office. Hinged Panel Mounting Bracket provides easy access to rear of equipment (as with Swing Gate Rack). The bracket mounts to the wall; panels pivot open on the included hinges. Attach cables to the tie points at the top and bottom of the bracket. The bracket is available in 10 sizes (five heights, two depths) and supports up to 30 lb of 19” EIA equipment.

Standard Swing Gate Wall Rack pivots open to the right or left to provide easy access to the rear of equipment and is ideal for storing the mix of patch panels and equipment typical in most small telecommunications rooms. Available in four heights and three depths, including a 25" deep version, Standard Swing Gate Wall Rack will support up to 100 lb of equipment, up to 150 lb with an auxiliary bracing kit.

If you need strength, physical security and utility, Cube-iT Plus Wall Cabinet is the answer. Cube-iT is a series of wall-mounted and floor-supported telecommunications enclosures designed to secure equipment for a cross connect. The wall-mount Cube-iT will support up to 200 lb of equipment and the floor-supported Cube-iT will support up to 1000 lb of equipment. The cabinets are copper and fiber ready, and feature easy access to the front and rear of the cabinet. Available in five heights and four depths and ships fully assembled with mounting hardware.

Organize.

Wall-Mount Systems

Extra Capacity Wall Bracket Fixed Wall-Mount Rack Wall-Mount Rack Enclosure Hinged Panel Mounting Bracket Standard Swing Gate Wall Rack Cube-iT PLUS Cabinet System

Store.

Secure.

All products quoted are subject to availability based on manufacturing capacity and shipping dates should be considered estimates

only. While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or

omissions and reserves the right to change information and descriptions of listed services and products.

tered trademarks of Chatsworth Products, Inc. CPI Passive Cooling, Cube-iT Plus, EasySwing, FastTrac, Multi-Mount, Structured

Termination Systems, TeraFrame, Thinline, QuadraRack and Universal Rack are trademarks of Chatsworth Products, Inc. All other

trademarks belong to their respective companies. MKT#60020-205 Rev2 05/07/NB

CPI’s new online Product Configurator is an easy-to-use confidential tool that guides you through the steps and selections necessary to create customized Systems. Check out the Product Configurator at www.chatsworth.com/configurator.

Extra Capacity Wall Bracket Fixed Wall-Mount Rack Fixed Wall Rack With Enclosure Hinged Panel Mounting Bracket Standard Swing Gate Wall Rack Cube-iT PLUS Cabinet System

Key Accessories

Part No. Description Wt. 40605-001 #12-24 Screws, Bag of 50 1 lb 40605-005 #12-24 Screws, 50, Black 1 lb

Part No. Description Wt. 11754-X19 19”W x 6U, 12.25”D 5 lb

*Note: Designate finish color: (-1) for Gray, (-2) for White, (-5) for Grained Aluminum and (-7) for Black. Other styles available. Contact Tech Support at 800-834-4969 for additional options.

Key Accessories

Part No. Description Wt. 11799-001 Cable Rings, Set of 6 2 lb 12858-001 Corner Cushions, Set of 4 1 lb 40605-001 #12-24 Screws, Bag of 50 1 lb 40605-005 #12-24 Screws, 50, Black 1 lb

Part No. Description Wt. 11960-X06 19”W x 24.5”H x 6”D, 13U 9 lb

11961-X06 19”W x 38.5”H x 6”D, 21U 10 lb

11962-X06 19”W x 73.5”H x 6”D, 41U 15 lb

11960-X12 19”W x 24.5”H x 12”D, 13U 10 lb

11961-X12 19”W x 38.5”H x 12”D, 21U 11 lb

11962-X12 19”W x 73.5”H x 12”D, 41U 16 lb

11960-X18 19”W x 24.5”H x 18”D, 13U 13 lb

11961-X18 19”W x 38.5”H x 18”D, 21U 15 lb

11962-X18 19”W x 73.5”H x 18”D, 41U 19 lb

*Note: Designate finish color: (-1) for Gray, (-2) for White, (-5) for Grained Aluminum and (-7) for Black. Other styles available. Contact Tech Support at 800-834-4969 for additional options.

Key Accessories

Part No. Description Wt. 11755-003 100 CFM Fan/Filter Kit 3 lb 40605-001 #12-24 Screws, Bag of 50 1 lb 40605-005 #12-24 Screws, 50, Black 1 lb

Part No. Description Wt. 12264-X16 19”W x 24.5”H x 12”D, 13U 44 lb

Solid Metal Door

12265-X16 19”W x 24.5”H x 12”D, 13 U 44 lb

Solid Plexiglass Door

12324-X22 19”W x 38.5”H x 18”D, 21U 60 lb

Solid Metal Door

12325-X22 19”W x 38.5”H x 18”D, 21U 60 lb

Solid Plexiglass Door

*Note: Designate finish color: (-1) for Gray, (-2) for White, (-5) for Grained Aluminum and (-7) for Black. Other styles available. Contact Tech Support at 800-834-4969 for additional options.

Part No. Description Wt. 11521-X04 19”W x 3.50”H x 4”D, 2 RMU 2 lb

11522-X04 19”W x 5.25”H x 4”D, 2 RMU 3 lb

11523-X04 19”W x 7.00”H x 4”D, 4 RMU 5 lb

11524-X04 19”W x 8.75”H x 4”D, 5 RMU 6 lb

11525-X04 19”W x 10.5”H x 4”D, 6 RMU 7 lb

11521-X08 19”W x 3.50”H x 8”D, 2 RMU 3 lb

11522-X08 19”W x 5.25”H x 8”D, 2 RMU 4 lb

11523-X08 19”W x 7.00”H x 8”D, 4 RMU 6 lb

11524-X08 19”W x 8.75”H x 8”D, 5 RMU 7 lb

11525-X08 19”W x 10.5”H x 8”D, 6 RMU 8 lb

*Note: Designate finish color: (-1) for Gray, (-2) for White, (-5) for Grained Aluminum and (-7) for Black. Other styles available.

Key Accessories

Part No. Description Wt. 40605-001 #12-24 Screws, Bag of 50 1 lb 40605-005 #12-24 Screws, 50, Black 1 lb

Key Accessories

Part No. Description Wt. 11799-001 Cable Rings, Set of 6 2 lb 12795-X01 Heavy-Duty Bracket 4 lb 12858-001 Corner Cushions, Set of 4 1 lb 40605-001 #12-24 Screws, Bag of 50 1 lb 40605-005 #12-24 Screws, 50, Black 1 lb

Part No. Description Wt. 11790-X18 19”W x 24.5”H x 18”D, 13U 23 lb

11791-X18 19”W x 38.5”H x 18”D, 21U 27 lb

11807-X18 19”W x 49.0”H x 18”D, 47U 30 lb

11792-X18 19”W x 73.5”H x 18”D, 41U 30 lb

11790-X25 19”W x 24.5”H x 25”D, 13U 42 lb

11791-X25 19”W x 38.5”H x 25”D, 21U 46 lb

11807-X25 19”W x 49.0”H x 25”D, 27U 50 lb

11792-X25 19”W x 73.5”H x 25”D, 41U 50 lb

*Note: Designate finish color: (-1) for Gray, (-2) for White, (-5) for Grained Aluminum and (-7) for Black. Other sizes and styles available.

Key Accessories

Part No. Description Wt. 12804-701 100 CFM Fan Kit lb 12805-701 Filter Kit for Fan lb 12806-001 Replacement Filters, Box of 6 lb 12796-501 45º Mounting Bracket lb 12803-701 Light lb 40605-001 #12-24 Screws, Bag of 50 1 lb 40605-005 #12-24 Screws, 50, Black 1 lb

Part No. Description Wt. 11890-X24 19”W x 24”H x 18”D, 12U 70 lb