Chatsworth Products Seismic Protection Systems User Manual
800-834-4969
techsupport@chatsworth.com
www.chatsworth.com
PRODUCT APPLICATION
Seismic Protection Systems
Chatsworth Products, Inc. (CPI) Seismic Protection Systems reduce the risk of equipment damage by stiffening, bracing and stabilizing racks and rack-mounted
equipment to comply with structural recommendations. When planning installations in seismically active regions, CPI helps reduce the approval cycle by
obtaining California’s Office of Statewide Health Planning and Development (OSHPD) Pre-Approval (OPA) numbers for several IT infrastructure products. In
compliance with earthquake design criteria, CPI’s Seismic Protection Systems protect equipment so it remains operational when subject to earthquakes.
1
3
2
Seismic Products for Rack Systems
Seismic Products for Cabinet and Enclosure Systems
Seismic Products for Cable Runway
1
2
3
CPI Seismic Protection Systems:
CPI has obtained California’s Office
of Statewide Health Planning and
Development (OSHPD) pre-approval
(OPA) numbers for several CPI
IT infrastructure products.
A list of OPA numbers is
available at
www.chatsworth.com/OSHPD.
©2008 Chatsworth Products, Inc.
PRODUCT APPLICATION SHEET
Seismic Products for Rack Systems
Seismic Frame®Two-Post Rack
Supports patch panels and network switches in seismic hazard areas.
Rated for a 1,000 lb (453.6 kg) load per Network Equipment Building
Systems (NEBS) GR-63-CORE Zone 4 requirements.
Part Number Description
13853-703
19”W x 7’H (2.1 m), 44 RMU,
Tapped #12-24 Zinc Rails, Black
13854-703
19”W x 7’H (2.1 m), 44 RMU,
Square-Punched Zinc Rails, Black
13855-703
19”W x 7’H (2.1 m), 44 RMU,
Tapped #12-24 Painted Rails, Black
13856-703
19”W x 7’H (2.1 m), 44 RMU,
Square-Punched Painted Rails, Black
13883-703
23”W x 7’H (2.1 m), 44 RMU,
Tapped #12-24 Zinc Rails, Black
13884-703
23”W x 7’H (2.1 m), 44 RMU,
Square-Punched Zinc Rails, Black
13885-703
23”W x 7’H (2.1 m), 44 RMU,
Tapped #12-24 Painted Rails, Black
13886-703
23”W x 7’H (2.1 m), 44 RMU,
Square-Punched Painted Rails, Black
Universal Earthquake Bracing Kit
Adjustable bracket for bracing an equipment rack or auxiliary frame to
the wall or ceiling to meet earthquake safety codes.
Part Number Description
10562-001 Universal Earthquake Bracing Kit
Seismic Frame®Two-Post Rack Floor Anchor Kit
Set of four seismic-rated concrete floor anchors for Seismic Frame
®
Two-Post Rack.
Part Number Description
13702-001 Concrete Floor Anchor Kit
All products quoted are subject to availability based on manufacturing capacity and shipping dates should be considered estimates only. While every
effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change
information and descriptions of listed services and products.
©2008 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame and MegaFrame are
federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus, Evolution, Simply Efficient, TeraFrame and QuadraRack are
trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. MKT-60020-377 09/08
Note: Additional installation hardware is required.
Equipment and Tower CPU Adjustable Tie-Down Brackets
(for Two-Post Racks)
Rack-mount brackets that secure equipment to shelves.
Part Number Description
11349-719 Desktop CPU Tie-Down Bracket, 19” Rack, Black
11349-723 Desktop CPU Tie-Down Bracket, 23” Rack, Black
12091-719 Variable Height Tie-Down Bracket, 19” Rack, Black
12091-723 Variable Height Tie-Down Bracket, 23” Rack, Black
12086-719 Tower CPU Tie-Down Bracket, 19” Rack, Black
12086-723 Tower CPU Tie-Down Bracket, 23” Rack, Black
Other colors available.
Seismic Products for Cable Runway
Seismic Products for Cabinet Systems
Seismic Frame®Cabinet System
Supports computer, data storage and network equipment in seismic
hazard areas. Rated for an 800 lb (362.9 kg) load per NEBS
GR-63-CORE Zone 4 requirements.
Part Number Description
11972-742
19”W x 36”D x 7’H (2.1 m), 43 RMU, Includes
Perforated Doors, Top and Side Panels, Black
11973-742
19”W x 36”D x 7’H (2.1 m), 43 RMU, Includes
Perforated Doors and Top Panel (No Side Panels)
11974-702
19”W x 36”D x 7’H (2.1 m), 43 RMU,
(No Doors, Top or Side Panels), Black
Other colors available.
Seismic Equipment Bracket for Cabinets
Rack-mount bracket that secures equipment to shelves.
Part Number Description
14061-719
19”W x 1 RMU, Adjusts 15” to 32”D
(380 mm to 810 mm), Black
Adjustable Bracing Kit for Cabinets
Brace the top of the cabinet to a nearby wall.
Part Number Description
12477-719 Adjusts 24” to 36”D (610 mm to 910 mm), Black
Splice Kits
Connect Cable Runway together.
Part Number Description
11299-X01 Heavy-Duty Butt-Splice Kit
16299-X01 UL Classified Heavy-Duty Butt-Splice Kit
11298-001 Heavy-Duty Junction Splice Kit
16298-001 UL Classified Heavy-Duty Junction Splice Kit
Earthquake Bracing Kits
Stiffening brackets for threaded rod supports.
Part Number Description
10695-001 Single Earthquake Brace
10696-001 Double Earthquake Brace
Cable Runway Wall Angle
L-shaped angle used with Earthquake Bracing Kits.
Part Number Description
11420-101 1’L (0.3 m), Gray
11420-104 4’L (1.2 m), Gray
11420-108 8’L (2.4 m), Gray
11420-110 10’L (3.0 m), Gray
Other colors available. Widths ranging from 4” to 24” available.
Other colors available. Install using four seismic-rated concrete anchors (sold
separately - see below).
Includes four Hilti HSL-3 M 12/25 anchors.
Heavy Duty Equipment Shelf for 6” (150 mm) Channel
Use on 19”W Seismic Frame Two-Post Racks to support shelf-mount
equipment.
Part Number Description
12293-719
19”W x 5 RMU, 20”D (450 mm)
Supports up to 200 lb (90.7 kg), Black
Other colors available.
Fixed Shelf
Use on 19”W Seismic Frame®Cabinets to support shelf-mount
equipment.
Part Number Description
14070-719
19”W x 2 RMU, 29”D (740 mm)
Supports up to 200 lb (90.7 kg), Black
Other colors available.
Other colors available.
Other colors available.
Seismic Frame®Two-Post Rack Vertical Cabling Section
Provides a double-sided, front and rear cable pathway
Part Number Description
13704-703 Vertical Cabling Section, Black
Other colors available. Other CPI cable managers can be mounted on Seismic Rack.
Loading...