Chatsworth Products 16147-052, 16147-010, 16147-050, 16147-063, 16147-054 User Manual

PRODUCT APPLICATION

Electronic Locking System For CPI Cabinets

Electronic Locking System

Automate access control and monitoring in your data center, computer
room and network facilities with the Electronic Locking System.

• Automate data center cabinet access control and monitoring

• IP addressable system increases security

• Assign and program individual user ID access codes

• Access cabinets via a network-connected computer, keypad or
proximity cards

• Create a log entry for each access attempt and configuration change

• Monitor handle conditions — opened or closed

• Forward SNMP traps to designated computers during alarm conditions

• Quickly update the system configuration and users privileges

• Easily add modules as your network grows

Communications Module (required) — Provides a single IP

addressable network connection for the Electronic Locking

System and is used to setup and configure the system.

Each Communications Module can support any

combination of up to 64 Electronic Lock Control
Modules (512 handles, 256 cabinets), 64 Keypad

Modules and 64 Proximity Card Reader Modules. Control

access to equipment with computer terminals using the

included lock control software. Provide alarm outputs for

unauthorized entries. The software also keeps a log of

each access attempt and all configuration changes.

Electronic Lock Upgrade Kit (required)

— Replace the mechanical lock on the

cabinet’s swing handle with an electronic

solenoid that releases the spring-loaded
handle when the correct code is entered.

When the correct code is entered, the

handle springs open allowing the door to

be opened.

Electronic Lock Control Module (required) —

Connects upgraded electronic locks to the

Electronic Locking System and controls the

solenoid that opens the cabinet handles.

Each Electronic Lock Control Module
connects eight handles (four cabinets) to

the system. Each handle can have up to

five access codes and can be assigned to

24 user groups. The Electronic Lock Control

Module also reports the status of the handle

(opened or closed).

Communications Module

Electronic Lock Upgrade Kit (2 per cabinet)
with Electronic Lock Extension Cable

Electronic Lock Control Module (8 handle)

Keypad Module
with Keypad Module Cable

Proximity Card Reader Module

Rear
View

Keypad Module (recommended) — Enter an

authorized access code on the Keypad Module to
open a handle. The Keypad Module can be placed

on or near the cabinets and can open any of the

cabinet handles in the system.

Proximity Card Reader Module (optional) — Use with the

Keypad Module. The proximity card acts like a key replacing the

access code. The proximity card can be programmed with a
specific handle access code or with up to 24 user group codes to

open multiple cabinets. Proximity cards can also be programmed

to open handles a specific number of times and to expire at a

specific time and date.

800-834-4969

[e-mail]

www.chatsworth.com

P R O D U C T A P P L I C AT I O N S H E E T

S O L U T I O N O V E R V I E W :

• User specific accounts - assign each authorized user access to specific cabinets with an individual access code or proximity card

• Records each access attempt - the lock control software keeps a log with records of each access attempt and each configuration change

• Quick changes to access permissions - software allows the system administrator to add or remove authorized users and change access codes and
permissions quickly

• Create multiple user groups - the system administrator can associate users and latches by a group number to restrict access by service group, authorization
level, facility or region with the lock control software

• Remote access control over the network - the lock control software lets authorized users see the status of all latches and open door latches remotely

• Generates alarm outputs for unauthorized entries - the Communications Module has two alarm relay outputs that can be used to send SNMP traps to
designated computers, operate external devices or to connect to the CPI Remote Infrastructure Management (RIM-600) System to notify you if there is an
unauthorized entry

• Grows with your network - simply add modules as your network grows; a single network connection provides access to 256 cabinets (512 swing handles)

• Connect the Communications, Electronic Lock Control and Proximity Card Reader Modules with RJ-45 patch cords; connect Keypad Modules with Keypad
Module Cables; connect Electronic Lock Upgrade Kits and Electronic Lock Control Modules with Electronic Lock Extension Cables

O R D E R I N G I N F O R M A T I O N

Part Number Description

16147-050 Communications Module

16147-010

16147-060

16147-061

16147-062

16147-063

16147-052 Electronic Lock Control Module for 8 Swing Handles 5 lb (2.3 kg)

16147-008 Keypad Module with (1) Keypad Module Cable 1 lb (0.5 kg)

16147-054 Proximity Card Reader Module 5 lb (2.3 kg)

60070-007 Network Patch Cord, RJ-45, 7’L (2.1 m) 1 lb (0.5 kg)

60070-014 Network Patch Cord, RJ-45, 14’L (4.3 m) 1 lb (0.5 kg)

60070-025 Network Patch Cord, RJ-45, 25’L (7.6 m) 1 lb (0.5 kg)

16147-015 Electronic Lock Extension Cable, 16’L (5 m) 1 lb (0.5 kg)

Electronic Lock Upgrade Kit for Enhanced SteelFrame Cabinet

for the Front or Rear Door (1/Door)

Electronic Lock Upgrade Kit for TeraFrame™Cabinet System

with a Single Solid or Perforated Front Door (1/Door)

Electronic Lock Upgrade Kit for TeraFrame Cabinet System with

a Single Solid Plexiglass Front Door (1/Door)

Electronic Lock Upgrade Kit with Integrated Keypad Module

for a TeraFrame Cabinet with a Single Solid or

Perforated Front Door (1/Door)

Electronic Lock Upgrade Kit for TeraFrame Cabinet System with

a Single or Double Solid or Perforated Rear Door (1/Door)

Shipping Weight

5 lb (2.3 kg)

1 lb (0.5 kg)

3 lb (1.4 kg)

3 lb (1.4 kg)

4 lb (1.8 kg)

2 lb (0.9 kg)

16147-050

16147-060

16147-052

16147-062

16147-016 Keypad Module Cable, 9’L (2.7 m) 1 lb (0.5 kg)

Note: Contact CPI Technical Support to configure TeraFrame Cabinets with electronic locks.

R E C O M M E N D E D A C C E S S O R I E S :

Part Number Description Shipping Weight

60000-001

60052-002 Door Open/Closed Sensor 1 lb (0.5 kg)

60065-001 Axis®Network Camera 1 lb (0.5 kg)

60050-001 Dry Contact Bridge (NO/NC) 1 lb (0.5 kg)

60061-007 Motion Sensor, Passive Infrared 1 lb (0.5 kg)

Remote Infrastructure Management (RIM-600)

System Host Module

14 lb (6.4 kg)

All products quoted are subject toavailability based on manufacturing capacity and shipping dates should be considered estimates only. While
every effort has been made toensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reservesthe

©2009 Chatsworth Products, Inc. All rightsreserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame and MegaFrame are

federally registered trademarks of Chatsworth Products,Inc. Cube-iT Plus, Evolution, OnTrac, QuadraRack, Simply Efficient and TeraFrame are

16147-054

16147-008

60000-001

Not exactly what you need?

For complete information visit
www.chatsworth.com/locks.

right to change information and descriptionsof listed services and products.

trademarks of Chatsworth Products, Inc. Allother trademarks belong to their respective companies. MKT-60020-355Rev.3 01/09