Chase ABS-5000 User Manual

Fill in Opening Size in the Blanks Provided Above

SPEC SHEET ABS-5000

Attention:

Email:

Print

Reset

Save

Quote/Order# Company Name:

Phone#:

3/8"

PAIR

1/2"

Job Name:

SINGLE

1/4"

3/4"

C

L

60"

1"

CROSS SECTION

3/4"

* Single Leaf-- Specify
Left or Right Hinge

1/4"

STANDARD SPECIFICATIONS: Door body 1/4" thick textured finish on front side only. Jamb edge is reinforced with 2
pieces of 1/4" X 7" ABS material and stainless steel back channel. 3/4" door thickness at jamb edge. 14" x 16" clear acrylic
window set in black rubber molding. Door assembly includes the E-Hinge Hardware and both 1/4" - 20 x 1" thread cutting
screws and #14 - 1-1/2" sheet metal/wood screws for jamb by others.

INSTALLATION DETAILS: Jambs must be plumb and square. Minimum double 2 x 4 inch wood construction or equivalent.
Hollow metal jambs should be reinforced at hinge locations.

SPECIFIC DETAILS FOR DOOR CONSTRUCTION:

DOOR COLOR: [ ] Metallic Gray [ ] Black [ ] White [ ] Red [ ] Navy [ ] Beige [ ] Cloud Gray

[ ] Medium Brown

WINDOW: [ ] Standard 14" X 16" In Black Rubber Molding, Up 60" to Center of Window from Floor

[ ] Other:

JAMB GUARD: [ ] 3" X 9" [ ] 5" X 18"

PLATE: Specify Height: .

Color/Material: [ ] Black [ ] Same Color As Door [ ] Stainless Steel [ ] Other .

BUMPER: Standard Black Tear Drop Polyethylene Height: [ ] 12 [ ] 18 [ ] 24 [ ] 30 [ ] 36 [ ] 42

Aluminum Bumper Strip: [ ]

OTHER SPECIFICATIONS: .

Phone: [phone] [e-mail] Fax: [phone]

DATE:APPROVED BY:

Chase Doors