Page 1
Cube Size : 32.3”x32.3”x4.9” NW: 15.4 LBS
(TOP) GW: 19.8 LBS
ASSEMBLY INSTRUCTIONS
Description : COUNTER HEIGHT ROUND 30” TABLE
Dimension : Ø30”x36”.H
Cube Size : 31.5”x6.7”x6.7” NW: 8.8 LBS
(PEDESTAL) GW: 11 LBS
COUNTER HEIGHT ROUND 30” TABLE
- 1 -
Page 2
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for
durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1 B
Leg
4
C
Pedestal
1 D
Cross piece
1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Large flat
washer
(8.5x19mm)
4 2
Large lock
washer
(8.5x11mm)
4
3
Hexagon nut
(M8x13mm)
4 4
Wrench
(M13mm)
1
5
Small flat
washer
(6.5x13mm)
4 6
Small lock
washer
(6.5x9mm)
12
7
Bolt
(M6x35mm)
12 8
Allen key
(M4)
1
9
Medium flat
washer
(6.5x16mm)
8
COUNTER HEIGHT ROUND 30” TABLE
- 2 -
Page 3
STEP 1
Attach legs (B) to the pedestal (C) with washers (1), (2) and nuts (3). Tighten with wrench (4).
x4
C
B
1
2
3
4
STEP 2
Put the cross piece (D) on top of the pedestal, and attach with bolts (7), washers (5), (6). Tighten with
Allen key (8).
D
x4
8
7
5
6
COUNTER HEIGHT ROUND 30” TABLE
- 3 -
Page 4
STEP 3
Carefully place the cross frame (from Step 2) on bottom side of the table top (A), attach with bolts
(7), washers (9), (6). Tighten with Allen key (8).
A
6
9
7
8
x8
COUNTER HEIGHT ROUND 30” TABLE
- 4 -
Loading...