Charlton Home W001974004 Assembly Instructions

- 1 -

Cube Size : 38”x38”x4.9” NW: 26.4 LBS

(TOP) GW: 33 LBS

Cube Size : 31.5”x6.7”x6.7” NW: 8.8 LBS
(PEDESTAL) GW: 11 LBS

ASSEMBLY INSTRUCTIONS

Description : COUNTER HEIGHT ROUND 36” TABLE

Dimension : Ø36”x36”.H

COUNTER HEIGHT ROUND 36” TABLE

- 2 -

BEFORE ASSEMBLY

Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for
durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:

- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being

scratched.

- Remove all wrapping material, including staples & packing straps before you start to assemble.

- DO NOT tighten all screws and bolts until completely assembled.

- Keep all hardware parts out of reach of children.

PART LIST

When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:

NO

Description

Qty

Sketch

NO

Description

Qty

Sketch

A

Top

1 B

Leg

4

C

Pedestal

1 D

Cross piece

1

HARDWARE LIST

When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:

NO

Description

Qty

Sketch

NO

Description

Qty

Sketch

1

Large flat

washer

(8.5x19mm)

4 2

Large lock

washer

(8.5x11mm)

4

3

Hexagon nut

(M8x13mm)

4 4

Wrench

(M13mm)

1

5

Small flat

washer

(6.5x13mm)

4 6

Small lock

washer

(6.5x9mm)

12

7

Bolt

(M6x35mm)

12 8

Allen key

(M4)

1

9

Medium flat

washer

(6.5x16mm)

8

COUNTER HEIGHT ROUND 36” TABLE

- 3 -

STEP 1

Attach legs (B) to the pedestal (C) with washers (1), (2) and nuts (3). Tighten with wrench (4).

x4

C

B

1

2

3

4

STEP 2

Put the cross piece (D) on top of the pedestal, and attach with bolts (7), washers (5), (6). Tighten with
Allen key (8).

D

x4

8

7

5

6

COUNTER HEIGHT ROUND 36” TABLE

- 4 -

STEP 3

Carefully place the cross frame (from Step 2) on bottom side of the table top (A), attach with bolts
(7), washers (9), (6). Tighten with Allen key (8).

A

6

9

7

8

x8

COUNTER HEIGHT ROUND 36” TABLE