Page 1
TALL TV MEDIA STAND
1/13
Page 2
DO NOT RETURN
FOR REPLACEMENT PARTS OR OTHER
INQUIRIES PLEASE CONTACT US
PLEASE ENSURE TO HAVE THE MODEL #
FROM THE PACKAGING OR
INSTRUCTION BOOKLET
2/13
Page 3
IMPORTANT : Please read this manual carefully before beginning
.assembly of this product Keep this manual for future reference.
SAFETY INFORMATION
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. We do not recommend the use of power tools for assembly as this
could damage the unit. Only use manual tools.
May require 2 people for ease of assembly.
CARE and MAINTENANCE
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.
3/13
Page 4
PRE ASSEMBLY INFORMATION-
PARTS DESCRIPTION
A
TOP
QTY 1
B
Back
Side
SIDE
QTY 1 PAIR
C
Front
Side
D E F
Back
Side
Front
Side
DIVIDER
QTY 1 PAIR
BOTTOM PANEL
QTY 1
CABINET SHELF
QTY 1PAIR
G H I
DOOR
QTY 1 PAIR
BACK PANEL
QTY 1 SET
CABINET SHELF
QTY 2
FRONT BAR
QTY 1
NEED HELP? For help with assembly or if you are missing a part,Please call
customer service
4/13
Page 5
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
1 2 3
ALLEN KEY SCREW
M6 X 30 mm
QTY 18
4 5
HANDLE
M4 X 25 mm
QTY 2 SETS
7
8
CAM LOCK PIN
CAM LOCK
QTY 7 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 26
ALLEN KEY
QTY 1
6
WOOD DOWEL
8 X 30 mm
QTY 16
9
MAGNET AND PLATE
QTY 2 SETS
10 11
PHILLIPS SCREW
M3 X 12 mm
QTY 12
NEED HELP? For help with assembly or if you are missing a part,Please call
customer service
TIPPING RESTRAINT-1 SET
SHELF SUPPORT
QTY 24
a. M4 x 25mm
b. M4 x 15mm
c. M4 x 25mm
PHILLIPS SCREW
M3 X 15 mm
QTY 8
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
5/13
Page 6
COMPONENTS – KEY DIAGRAM
6/13
Page 7
STEP 1
ASSEMBLY
1. Insert Wood Dowels 6 into pre-drilled holes of Dividers C .
2. Attach Dividers C to Bottom Panel D with Allen Key Screws 1 through pre-drilled
holes .
7/13
Page 8
STEP 2
ASSEMBLY
1. Insert Wood Dowels 6 into pre-drilled holes of Bottom Panel D and Front Bar I .
2. Attach Cam Lock Pins 2 to Sides B using guide holes.
3. Align Cam Locks Pins 2 into pre-drilled holes on Bottom Panel D .
4. Insert Front Bar I (with the Dowels already inserted) into holes on sides B .
5. Insert Cam Locks 2 into pre-drilled holes in Bottom Panel D .
6. Once in place tighten Cam Locks 2 using a flathead srewdriver.
8/13
Page 9
STEP 3
ASSEMBLY
1. Insert 2 Dowels 6 into corners of each Side B .
2. Attach Cam Lock Pins 2 to Top A using guide holes.
3. Aligh Cam Lock 2 into pre-drilled hole on Front Bar I .
4. Align pre-drilled holes on Bottom corners of Top A with Dowels 6 in Sides B .
5. Insert Cam Locks 2 into pre-drilled holes on Front Bar I .
6. Using 12 Allen Key Screws 1 attach Top A to Sides B and Dividers C .
9/13
Page 10
STEP 4
ASSEMBLY
NOTE: The screwdriver is not
included in the hardware pack.
1. Attach hinges on Doors G to Sides B using Phillips Screws 10.
2. Attach Magnet Plates 7 to Bottom corner of Doors G using Phillips Screws 9
into guide holes on Doors G .
3. Attach Magnet 7 using Phillips Screws 9 into guide holes on Bottom Panel D .
4.Use a Phillips screwdriver to attach Handles 4 to Doors G .
10/13
Page 11
STEP 5
ASSEMBLY
NOTE: The screwdriver is not
included in the hardware pack.
1. Attach Back Panels H to back of cabinet using Phillips Screws Round Head 5 into
pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws.
STEP 6
1. Use 4 Shelf Supports 8 for each shelf E & F in desired location.
2. 2 Shelf Supports 8 may be used on Back Top of each Shelf E & F as a tipping
restraint.
11/13
Page 12
ASSEMBLY
NOTE: Injuries and damage can occur from furniture tip-over. It is important to use
the safety bracket included. If the tipping restraint kit is not in the box, please contact
our customer service department in order to obtain another kit before using the
STEP 7
NOTE: The screwdriver is not
included in the hardware pack.
1. To attach Tipping Restraint 11 , follow instructions on Tipping Restraint package.
When you detemined the location for your unit, install the Furniture Tipping restraint.
Carefully follow the instructions contained on the package.
12/13
Page 13
WARRANTY
Thank you for purchasing product. These products have been made to
demanding, high-quality standardsand are guaranteed for domestic use against
manufacturing faults for a period of12 months from the date of purchase. This
warranty does not affect yourstatutory rights.
In case of any malfunction of your product (failure, missing parts, etc.) please
contact us at our toll free service line or by email.
We reserve the right to repair or replace the defective product, at its discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair by other than an authorized agent. Heavyduty or daily professional/commercial usage are not guaranteed.
Due to continuous product improvement, we reserve the right to change the
product specifications without prior notice.
PLEASE NOTE: This item is hand-crafted and hand-finished with utmost care.
As such, variations and imperfections should be expected and should be
welcomed as the natural beauty of the wood.
13/13
Loading...