Page 1
1. Unpack planter box from carton and layout all
parts including hardware (8 long wood screws and 8
short wood screws).
Tools Needed:
1 screwdriver (manual or power)
2. Place planter box corners of one Side Panel and
one End Panel together to form a tight seam. (NOTE:
Long wood screws go through end panels into side panels;
short screws go through side panels into end panels. See
picture below.)
3. Screw in two wood screws at the top and bottom
of the planter box (4 screws total). Repeat the
process for the other Side Panel and End Panel of
the planter box (4 corners total).
4. Set planter box bottom panels (4) into place as
shown. NOTE: Panels with holes should be placed
at each end of the planter box as shown below.
Bottom Panel Holes
Long Wood Screw
Short Wood Screw
Long
Screw
Short
Screw
Parts List
2 Side Panels
2 End Panels
3 Bottom Panels
8 Short Wood Screws
8 Long Wood Screws
48" Rectangular Planter Assembly Instructions
Enjoy your new 48" Rectangular Planter
Loading...