Page 1
WINE RACK LATTICE
• Always read the instructions completely and carefully before beginning assembly.
• Remove and check contents for damage and/or missing parts. Keep the original
carton and packing materials, which are required for any authorized adjustment by
our dealers.
Installation Instructions;
Step 1:
same measurements on both panels, making the marks so the lattice panels remain
symmetrical.
Mark the lattice panels and cut along the lines you marked. Sand the cut portions of the lattice
panels until they are smooth.
Measure the inside of the cabinet where you plan to install the wine rack. Mark the
Important Notes
Parts:
Page 2
Step 2:
mount lattice and attach to inside of cabinet.
Construct cleat frame (3/4”) to
Step 3:
front of the back of the cabinet so that the bottle
will rest on the lattice. (Ref= 4” from back)
Space Lattice Panels at approximate 6 - 7” apart as
necessary per bottle size.
The Lattice will need to be installed in
Step 4:
cabinet to lattice panels and frame to secure.
Pin nail through the top and bottom of
PIN NAIL TO ATTACH THROUGH
TOP AND BOTTOM
FRAME
Loading...