Page 1
Caution : You must read this before you proceed
Push Back Chair
Label Picture Description QTY
A Chair Backrest 1
Page 1 OF 9
Page 2
B
Chair Base with
1
Footrest
C
D
E Front Leg 2
Left Wing（Labelled
1
C）
Right Wing
1
（Labelled D)
F Hind Leg 2
Label Picture Description QTY
①
Gasket 7
Page 2 OF 9
Page 3
Before Beginning
Assembly:
Parts Introduction
Left Wing(D)
Chair Backrest(A)
Right Wing(C)
Chair Base with
Footrest(B)
Hind Leg(F)
FRONT FACING
Front Leg(E)
This Push Back Chair has multiple parts and may require up to some
30 minutes to assemble. To give you an overview of the Reclining
Chair parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions herebelow to
familiarise the parts and steps before assembly.
Page 3 OF 9
Page 4
Step 1
Velcro
A
A
B
Take out the Chair Backrest(A) from Chair Base with Footrest(B).
Step 2
Chair Base with
Footrest(B)
Velcro
F
①
E
Non-woven Bag
Place the Chair Base with Footrest(B) on a clean, non-marring surface.
Lay Chair Backrest(A) and non-woven bag aside.
Open the non-woven bag and take out the Legs and Gasket.
Step 3
Page 4 OF 9
D
C
Page 5
Turn the Chair Base with Footrest(B) upside down on a clean, non-marring
surface.
Take out 2 non-woven bags with Wings inside from the bottom of the
mechanism. Then take out the Wings from non-woven bags.
Step 4
Legs:Bevelledplane
insidefacing
F
①
B
Keep the Chair Base with Footrest(B) in the same position. First, install the
Front Leg(E) at the bottom of the Chair by placing one Gasket① on the
threaded stem.
Then insert threaded stem into the threaded mounting postion at the corner of
E
①
the Chair.
Tighten by turning the Leg clockwis, DO NOT OVER TIGHTEN.
Repeat the same step to install the remaining three Legs(E) .
Take care of the shape of the Legs and ensure they are in the correct postions.
Note: The use of Gaskets are OPTIONAL and are especially useful to help
alleviate slight wobbleness. Some Legs may need more than one gasket
whilst some legs may not need any.
Step 5
A
Velcro
F
B
E
A
Velcro
B
E
F
Page 5 OF 9
Page 6
With assistance from your adult partner, hold up the fully assembled backrest ,
stand behind the chair.
Insert the small metal arms on the sides of the Chair Backrest into the
prefabricated slide lock gadget on the Chair Base as shown above.
Firmly but gently, push the Chair Backrest downwards until the Backrest is
fully slotted and locked into position.
Step 6
A
C
F
B
E
Position the Chair Backrest(A) on it's left side.
Align the mounting brackets of the Left Wing(C) with those on the left side of
Chair Backrest(A).
Then slide Left Wing(C) forward by hand to make sure it locks into the position
as shown in the picture.
Step 7
D
A
C
F
B
E
Position the Chair Backrest(A) on it's right side.
Align the mounting brackets of the Right Wing(D) with those on the right side of
Chair Backrest(A).
Then slide Right Wing(D) forward by hand to make sure it locks into the
position as shown in the picture.
Page 6 OF 9
Page 7
Step 8
Velcro
Smooth down the fabric flap on the Chair Backrest.
Run your hands down both sides of the flap, from top to bottom, allowing the
velcro tape to adhere to the flap under the seat of the chair.
Your Push Back Chair is ready for use.
Step 9
Make sure all parts are connected and securely locked into position.
Your Chair is ready for use.
Velcro
A
A
D
Velcro
B
B
F
E
D
F
Step 10
C
Disassembly Note:Open the flap on the Chair Backrest(A),use a
screwdriver(Don't use fingers) pressing outward on the metal ear on the
preattached Metal Bracket on one side of the Chair Base(B),with assistance of
you adult partner to keep the Chair Base(B) in place, pull out the Chair
C
Backrest(A) upward at the same time,repeat the same step for another
side.Then the Chair Backrest(A) can be taken out.
Page 7 OF 9
Page 8
User Instructions.
Please read the Instruction Manual below carefully before use.
Supervise children, when in use of this Push Back Chair.
Do not let Child stand in front or back of the Push Back Chair when open or
close the footrest. Do not put you hands inside the Footrest when open or
close the footrest. Do not seat any armrest of this Chair.
To get into a open position - To push the Chair Backrest
To get out of chair - move Seatback into Upright Position
Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Use your feet to push the footrest back.You can stand up when the footrest and the
machanism clicked.
Where necessary, use either your arms help lift- push yourself out of the seat.
Page 8 OF 9
Page 9
Page 9 OF 9
Loading...