Page 1
POST MOUNT
Assembly Instructions
CAUTION
• Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect in
the wire, do not attempt installation.
TOOLS REQUIRED
• Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning o the circuit breaker or by
removing the fuse at the fuse box.
Ladder
Safety
glasses
Electrical
tape
Phillips
screwdriver
screwdriver
Fixture Top
PliersFlat blade
Wire
strippers
Wire NutsFixture
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
page 1
Page 2
POST MOUNT
Assembly Instructions
STEP 1
Install a bulb and secure the fixture top to the
fixture.
STEP 2
Connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape
Connect Clear, Brown, Gold or
Black Parallel Wire without tracer
(round & smooth) or Black Fixture
Wire to:
Black or Red Supply Wire or
Insulated Wire (other than green)
with copper conductor.
Connect Clear, Brown, Gold or
Black *Parallel Wire with tracer
(square & ridged) or White Fixture
Wire to:
White Supply Wire or Insulated
Wire (other than green) with silver
conductor
Copper
Smooth
STEP 3
Install the fixture to the pole or base (not included) and secure
with the pre-assembled screws.
Silver
Ridged
page 2
Loading...