Page 1
Kitchen Cart
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
To p
1 pc.
Side Panel
B.
1 pc.
C.
Side Panel
1 pc.
F.
Back Rail
1 pc.
G.
Front Rail
1 pc.
H.
Front Rail
1 pc.
Hardware List
Hex Wrench
1 pc.
I.
Base
1 pc.
J.
Shelf
1 pc.
M6x30
Head Cap Bolt
12 pcs. (+1 extra)
K.
Door
1 pc.
Cam Lock
6 pcs.(+2 extra)
L.
Door
1 pc.
Cam Lock Screw
6 pcs. (+1 extra)
D.
Back Panel
2 pcs.
E.
Back Upright
1 pc.
M.
Drawer
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
N.
Towel Bar
2 pcs.
Handle
1 pc.
Caster
2 Locking
2 Non-Locking
4 pcs.
Small Hex Wrench
1 pc.
Adjustable Pin
4 pcs. (+1 extra)
Tool(s) required for assembly: Phillips screwdriver
M3.5x25
Wood Screw (long)
8 pcs. (+1 extra)
M3.5x12
Wood Screw (short)
6 pcs. (+1 extra)
M4x25
Machine Screw
4 pcs.
Knob
2 pcs.
Page 2
Assembly Instructions 2/5
IMPORTANT
· Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.·
Do not tighten all the bolts until each part is properly assembled.·
Keep Hex Wrench as the bolts may need to be tightened in the future.·
STEP 1
Insert Cam Lock Screws
into pre-drilled holes of
Side Panels (B) and (C),
then tighten.
(See Figure 1)
Cam Lock Screw
B
C
Figure 1
STEP 2
Attach Base (I) to
Side Panel (B) with
Head Cap Bolts.
(See Figure 2)
Figure 2
STEP 3
Attach Back Panels (D), Back Upright (E)
and Back Rail (F) to unit with Cam Lock.
(See Figure 3)
I
Head Cap Bolt
B
D
Figure 3
E
D
F
Cam Lock
Page 3
Assembly Instructions 3/5
STEP 4
Attach Front Rails (G) and (H)
to unit with Cam Locks.
Attach Side Panel (C) to unit
with Cam Locks and Head Cap Bolts.
Cam Lock
C
G
H
Head Cap Bolt
STEP 5
Turn unit upside down.
Attach Casters to bottom of unit,
with Locking Casters at front.
(See Figure 4)
Non-Locking Caster
Locking Caster
Figure 4
Page 4
Drawer (M)
M3
Assembly Instructions 4/5
Wood Screw (long)
Bottom
M1
STEP 6
Attach Drawer Front (M1) and Drawer
Back (M2) to Drawer Side (M3) with
Wood Screws (long).
M2
M4
Attach Drawer Side (M4) to unit with
Wood Screws (long).
Roller at back
STEP 7
Slide Drawer Bottom (M5) into the grooves
of Drawer Sides (M3) and (M4) until it meets
Drawer Front (M1).
Attach Drawer Bottom (M5) to unit with
Wood Screws (short).
Wood Screw (short)
M1
M3
M5
M4
Machine Screw
STEP 8
Attach Handle with Machine Screws.
Part ListPart List
M1.
Drawer Front
1 pc.
Handle
M2.
Drawer Back
1 pc.
M3.
Drawer Side
1 pc.
M4.
Drawer Side
1 pc.
M5.
Drawer Bottom
1 pc.
Page 5
Assembly Instructions 5/5
STEP 9
Turn unit to its’ upright position.
Attach Towel Bars (N) to
unit with Head Cap Bolts.
Attach Top (A) to unit with Head Cap Bolts.
Insert Adjustable Pins into side panels
at desired level. (See Figure 5)
Place Shelf (J) into position.
N
A
Head Cap Bolt
N
J
Figure 5
Figure 6
Machine Screw
Figure 7
STEP 10
Attach Doors (K) and (L)
to unit by sliding door hinges
into side panel hinges.
(See Figure 6)
Adjustable Pin
Knob
M
K
L
Attach Knobs to Doors (K) and (L)
with Machine Screws. (See Figure 7)
Slide Drawer (M) into place.
Page 6
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
We will provide replacements free of charge for missing or damaged hardware or parts within 30 days ofpurchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorizedretail
affiliate, weare under no obligation to provide replacement parts. Parts are not available for fully assembleditems norare
parts available for sale. Replacementsfor missingor damaged hardware or parts maybe requested.
Loading...