Page 1
IMPORTANT:Turn off the power at the main fuse or circuit breaker box before staring installation
PRODUCT NAME:
Please consult your electrician for hanging fixture and wiring.
LED
Outdoor Deck Lantern
Integral lamp holder ( A)
Locate all hardware & components before discarding packing
1.)
Step1.Connect fixture wires to
house wires. Ensure the right
matching as black to black,
white to white,ground to ground.
(Caution: Make sure connections
are secure, in Right Polarity and in
Good Insulation)
Step2. Install expansion screw (B) into
ground (A) and secure using washers
(C&D) and tightening hex nut (E)
Black,white and
ground wire
Hex nut
Washer
Washer
Expansion
screw
Ground
12W LED
To prevent water intrusion, caulk around post cup
where fixture mee ts the wall using outdoor silicone
sealant.
MADE IN CHINA
Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Loading...