Page 1
Assembly Instruction
CAUTION:
Read instruction carefully and turn electicity off at main circuit breaker panel before
beginning installation.
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use
clean water,never a solvent ) to wipe the surface of the fixture.
To clear the inside of the fixture, fi
circuit
breaker or by removing the fuse at the fuse box. Next,use a dry or slightly dampened
clean cloth (use clean water,never a solvent) to wipe the interior surface of the fixture
rst disconnect power to the fixture by turning off the
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry
softcloth to dust or wipe carefully.
Estimated Assembly Time: 30 minutes
Part List and Hardware List
PIECE DESCRIPTION PICTURE
Mounting bar
A
Mounting screw
A1
Backplate
B
Backplate
C
screw
Nipple
D
Pillar
E
Finial
F
QUANTITY
1X
2X
1X
2X
1X
1X
1X
PIECE
G
H
I
J
K
L
M
DESCRIPTION
Finial
Screw pitch
Flat washer
Bolt
Shade
Bulb
Wire nut
PICTURE
QUANTITY
1X
2X
2X
1X
1X
1X
3X
Page 2
Installation
Step 1
Unpack all parts from cartons carefully
Fixting nipple(D) to the pillar(B) and screw
with finial(F)
Fixting finial(G) to the shade(K
）and screw with
bolt(J)
Fixting shade(K) to the backplate(B) and screw
with screw pitch(I)
Place bulb(L) to the socket
Step 2 Wire connection
Connect,Hot,Black or Red outlet Supply Wire to:
Black
* Parallel Cord(round & smooth)
Clear,Brown,Gold or Blac
Insulated Wire(not green) with copper metal conductor
k without Tracer(colored stripes)
Connect,Neutral,White Outlet Supply Wire to:
Clear,Brown,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green) with Silver metal conductor
White
* Parallel Cord(square& ridged)
*Note: When parallel wire(SPTI & SPT II) is used.The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth.(See illustration on lef
Step 3
Installing the mounting bar(A) with mounting screw(A1),
and secure Backplate (B) with Backplate screw(C)
Step 4
Consult a qualified electrician to ensure
correct branch circuit conductor
t.)
Loading...