SHOE BENCH
Wooden Shoe Bench with Cushion and Storage
NOTE:
* Read all instructions before starting
* Assemble on rug or cardboard to prevent scratches to the oor and product.
1
4
x2
6
8 9
2
5
7
3
Locking Bolt
16Pcs
Large Cam
8Pcs
Small Cam
8Pcs
Left Hinge Weight
1Pc
Right Hinge Weight
1Pc
Screws
12Pcs
Wooden Dowel
32Pcs
Screw Cover
1110
TOOLS RECOMMENDED
page 1
16Pcs
1
Connect panels (1) and (2) perpendicularly
to panel (3) using the locking bolt(A) and
wooden dowel(G).
STRUCTURE A STRUCTURE B
Slide both (4) panels into the
slots of panel (5)
H
C
A
G
Attach the panels by inserting and tightening the Small Cams (C).
Apply the Screw Covers (H) onto of the Cams.
2
Only slight turn of
Cams required.
Do NOT overturn.
Combine structure (A) with structure (B)
with wooden dowel(G) in place
C - Small Cam
H -Screw Cover
STRUCTURE A
G
STRUCTURE B
page 2
Connect panels(6) and (7) perpendicularly to
3
structure(A) and structure(B) using the
locking bolt(A) and wooden dowel(G).
B - Large Cam
H - Screw Cover
Only slight turn of
Cams required.
STRUCTURE B
STRUCTURE A
B
H
4
Do NOT overturn.
Slide back panel (8) into place and
prepare wooden dowel (G) for the
next step.
Attach the panels by inserting and tightening the Large Cams (B).
Apply the Screw Covers (H) onto of the Cams.
5
Attach the panels by inserting and tightening the Small Cams (C ).
Apply the Screw Covers (H) onto of the Cams.
Attach bottom panel (9) to the open side of
structure B using the locking bolt(A) and
wooden dowel(G).
Only slight turn of
Cams required.
Do NOT overturn.
C - Small Cam
H - Screw Cover
page 3
6
Attach hinge weights (D&E) with the screws(F)
F
F
7
Set the cushion on top in its place
ALL DONE!
page 4
Loading...