Char-Broil Alpine, Alpine 04501134 User Manual
Alpine
For Outdoor Use Only
0420110104501134
Outdoor Fireplace
CAUTION
THIS UNIT IS HEAVY!
DO NOT assemble without a helper.
CAUTION
Some parts may contain sharp edges – especially as
noted in manual. Wear protective gloves if necessary.
CAUTION
Read and follow all safety statements, warnings,
assembly instructions and use & care directions before
attempting to assemble.
WARNING
All surfaces can be hot during use. Use protection as
required to prevent burning.
WARNING
Do not use this unit on or near combustible surfaces or
structures such as wood decks, dry leaves or grass, vinyl
or wood siding, etc. SEE OWNER’S MANUAL FOR
IMPORTANT SAFETY INFORMATION.
WARNING
NEVER LEAVE FIRE UNATTENDED!
Do not allow small children near flame. Hot embers can
fly out in breezy conditions. Adequate fire extinguishing
material should be readily available.
WARNING
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off carbon
monoxide, which has no odor. NEVER burn charcoal
inside homes, vehicles or tents.
42804047 (12-14-05)
STOP!
Missing a part?
No need to go back to the store!
The store where you made your purchase
does not stock parts for this item. If you
need parts, whether they are missing or
damaged, call the Customer Service toll
free Help Line.
Call us and we
will gladly ship
the part you need.
PARTS LIST
Call Our Help Line
ITEM DESCRIPTION
55710102 BASE KIT
55710103 ASH PAN
55710104 DOOR FRAME KIT
55710105 SIDE PANEL KIT
55710106 TOP KIT
55710107 DOOR KIT
55710108 CHIMNEY PIPE / TOP KIT
29000991 LOG RACK
42000096 HARDWARE BAG
42804047 ASSEMBLY INSTRUCTIONS
To insure your satisfaction
and for follow-up service,
register your product
www.grillregistration.com
online at:
HARDWARE
Hardware is shown actual size. You may have spare hardware after assembly is complete.
#10-24x1/2”
Hex-Head Machine Screw
Qty. 8
#10-24x1/2”
Machine Screw
Qty. 10
#10-24
Flange
Nut
Qty. 18
#10x1/2”
Self-Tapping Screw
Qty. 1
#10-24x3/8”
Machine Screw
Qty. 8
#10-24
Hex-Keps Nut
Qty. 8
Tools needed for assembly: adjustable wrench, Phillips screwdriver.
Attach door frames to front and rear edge of ash pan using three and three
1
flange nuts
Door frame
per side. Hinge mounts should face inward.
Hinge mounts
facing inward.
#10-24x1/2” machine screws #10-24
#10-24x1/2”
Machine screw
#10-24 Flange nut
Loading...