• This grill is safety certified for use in the United States or
Canada only. Do not modify for use in any other location.
Modification will result in a safety hazard.
Safety Symbols
The symbols and boxes shown below explain what each heading
means. Read and follow all of the messages found throughout
the manual.
National Fuel Gas Code, NFPA 54 / ANSI
or.
or
Keep any electrical cords and/or
DANGER
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Model Number
Serial Number
See new rating label provided for serial number.
Date Purchased
CAUTION
For residential use only. Do not use for commercial
cooking.
WARNING
CALIFORNIA PROPOSITION 65
Combustion by-products produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, and other
reproductive harm.
WARNING
WARNING: Indicates an potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION: Indicates a potentially hazardous situation or
unsafe practice which, if not avoided, may result in minor or
moderate injury.
2 • 463247404
TABLE OF CONTENTSWARRANTY
For Your Safety......................................2
Grill Service Center...................................2
Product Record Information ............................2
Use and Care ...................................14-23
Stainless Steel Use and Care
Stainless steel grills can provide many years of reliable
service and an attractive appearance in normal outdoor
exposure. Consider the following tips to extend the
appearance of your stainless steel grill:
• Cooking smoke from normal use of the grill will eventually
coat and discolor the stainless steel surface. Periodic
cleaning of the surface with readily available stainless
steel cleaners is recommended. (In coastal areas, small
rust pits may develop on the surface of your grill that
cannot be fully removed by a cleaner.)
• Periodic cleaning of the cooking grates also helps
decrease the risk of a grease fire which can irreversibly
darken the stainless steel surface. (Please note that the
integrity of the steel is not affected by the flame, only the
appearance.)
Manufacturer warrants to the original consumerpurchaser that this product shall be free from defects in
workmanship and materials under normal and reasonable
use and correct assembly (if assembled by consumerpurchaser), from date of purchase.
Stainless steel and die cast parts - 99 years
Electronic ignition (excluding battery) and
cast iron burners - 10 years
Remaining parts (excluding battery) - 2 years
Manufacturer will, at its option, refinish or replace any
product or part found to be defective during the warranty
period. Manufacturer will require you to return the part(s)
claimed to be defective, for its inspection, freight or postage
prepaid.
If you wish to obtain performance of any obligation under
this limited warranty, you should write to:
Consumer Warranty / P.O. Box 1240
Columbus, GA 31902-1240
Manufacturer may require reasonable proof of purchase
and we suggest you keep your receipt. In the state of
California only, if refinishing or replacement of the product is
not commercially practicable, the retailer selling this product
or Manufacturer will refund the purchase price paid for the
product, less the amount directly attributable to use by the
original consumer-purchaser prior to discovery of the
nonconformity. In addition, in the state of California only, you
may take the product to the retail establishment from which it
was purchased or to any retail establishment selling this
product in order to obtain performance under this warranty.
This warranty does not include the cost on any
inconvenience or property damage due to failure of the
product and does not cover damage due to misuse, abuse,
accident, damage arising out of transportation of the product,
or damage incurred through commercial use of the product.
This express warranty is the sole warranty given by the
manufacturer and is in lieu of all other warranties, express or
implied, including implied warranty of merchantability or
fitness for a particular purpose. Neither Manufacturer dealers
nor the retail establishment selling this product has any
authority to make any warranties or to promise remedies in
addition to or inconsistent with those stated above.
Manufacturer's maximum liability, in any event, shall not
exceed the purchase price of the product paid by the original
consumer-purchaser. Some states do not allow the exclusion
or limitation of incidental or consequential damages. So the
above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and may also have
other rights which vary from state to state.
463247404 • 3
PARTS LIST – Model No. 463247404
Key QtyDescriptionPart #
1Grill Lid Assembly ...............80000836
A1Lid.............................80000837
B1Lid Handle ......................80000842
C1Handle Seat, Left .................80000845
D1Handle Seat Plate, Left ............80000511
E1Handle Seat, Right ................80000846
F1Handle Seat Plate, Right ...........80000512
G1Thermometer ....................80000096
H1Thermometer Bezel ...............80000097
I1Logo Plate ......................80001402
1Grill Bottom Assembly............80001516
J1Grill Bottom .....................80001517
K4Main Burner .....................80001254
L1Burner Brace/Carryover ............80001535
M1Manifold Heat Shield ..............80001539
Key QtyDescriptionPart #
1Cart Assembly ..................80001565
GG1Leg Assembly with Panel, Left .......80001566
HH1Leg Assembly with Panel, Right......80001573
I I1Cart Back Panel ..................80001577
JJ4Caster Socket....................80000377
KK1Bottom Shelf.....................80001578
LL2Bottom Shelf Slide Tracks ..........80001582
MM3Door/Tray Handle.................80000086
1Rotisserie Motor and Spit Assembly 80001603
NN1Spit Rod ........................80001604
OO1Spit Handle......................80001328
PP1Collar ..........................80001329
QQ2Fork ...........................80001330
RR1Rotisserie Motor ..................80001627
SS1Rotisserie Mounting Bracket, Right . . . 80001422
N1Ignitor System Assembly ...........80001615
O1Control Panel ....................80001540
P6Control Knob ....................80000825
Q5Control Knob Bezel ...............80001930
R1Smoker Tray.....................80001542
S1Manifold/Hose/Regulator Assembly . . . 80001544
T1Rotisserie Burner Assembly .........80000871
U1Rotisserie Electrode ...............80000885
V4Rotisserie Hose Clip...............80001550
W2Rotisserie Wind Shield .............80001639
1Sideburner Shelf Assembly........80001551
X1Sideburner Frame ................80001553
Y1Sideburner Lid ...................80000539
Z1Sideburner Pan ..................80000051
AA1Sideburner Electrode ..............80000055
BB1Sideburner Control Panel...........80001556
TT1Rotisserie Mounting Bracket, Left ....80001333
UU1Door Assembly - Left ..............80001583
VV1Door Assembly - Right .............80001586
WW1Door Brace ......................80001607
XX1Condiment Basket, Right ...........80001619
YY1Condiment Basket, Left ............80000785
ZZ2Locking Caster ...................80000268
AAA2Fixed Caster.....................80000269
BBB1Grease Tray .....................80001589
CCC1Grease Receptacle................80001622
DDD1SwingAway Warming Rack .........80001624
EEE1Cooking Grate Set ................80001643
FFF1Sideburner Grate .................80000282
GGG 2Match-Lighting Stick ...............80001923
HHH4Flametamers ....................80000947
I I I1Sideburner Valve Clip..............80000455
CC2Towel Bar .......................80001558
DD1Sideburner Assembly ..............80000453
1Side Shelf Assembly .............80001559
EE1Side Shelf.......................80001560
FF1Side Shelf Panel..................80001260
4 • 463247404
JJJ1AA Battery ......................80000284
KKK4Tool Hook .......................80001642
1Hardware Pack...................80001608
1Product Guide ...................80001609
PARTS DIAGRAM – Model No. 463247404
A
H
I
G
CC
KKK
QQ
E
DDD
RR
SS
KKK
CC
FF
GGG
WW
EEE
C
HHH
W
U
T
L
Y
FFF
X
Z
K
K
DD
III
BB
P
V
AA
DD
K
J
V
P
II
N
V
W
Q
JJJ
D
V
OO
S
O
P
PP
F
B
QQ
TT
NN
EE
M
R
BBB
CCC
GGG
GG
JJ
AAA
ZZ
JJ
LL
MM
GG
JJ
LL
AAA
HH
UU
JJ
MM
ZZ
KK
VV
MM
YY
NOTE: Some grill parts shown in the assembly steps may differ slightly in appearance from
those on your particular grill model. However, the method of assembly remains the same.
463247404 • 5
XX
ASSEMBLY – Model No. 463247404
Place sideburner shelf over left cart legs. Lip of shelf should fit between grill bottom and leg brace. (
1
slightly loosen the two screws from inside the grill bottom, and tighten them again once shelf is attached.
brackets to cart legs using two,, andon
each bracket.
Repeat procedure to install side shelf on right side of grill.
Loosen
these screws
if necessary.
Sideburner
shelf
Repeat procedure to
install side shelf on
right side of grill.
2
Control
Knob
Remove the two screws (M4x10mm) and washers (4mm) from the sideburner valve bracket.
Place sideburner valve under front of sideburner control panel so that valve stem comes through
large hole. Secure valve bracket to panel using the two screws and washers you removed
previously. Press control knob onto valve stem. Using a small slotted screwdriver, tighten the
control knob set screw through the hole at the bottom edge of the knob.
Valve stem
First, remove
screws and
washers from
bracket.
6 • 463247404
Set screw hole
Sideburner
valve
3
Insert sideburner into shelf, placing end of burner over
sideburner valve. Valve should be in center hole of burner
tube. Make sure pin on bottom of burner is in center hole
in shelf bracket. Secure burner to bracket with two
#10-24x3/8” screws (OOO) 5mm lock washers (PPP)
and.
5mm flat washers (QQQ) See illustration below for
correct burner-to-valve engagement
Pin
QQQ
PPP
in hole
,,
.
Correct
burner-to-valve
engagement
Sideburner
Valve should be
in center hole in
burner tube.
OOO
4
Insert valve clip into small hole in bottom of burner, then snap other end of clip over sideburner valve. Beneath sideburner
shelf, attach sideburner ignitor wire to electrode. Place brass top on sideburner, then place sideburner grate onto shelf.
Valve clip
Sideburner
ignitor wire
463247404 • 7
5
Remove screws and washers from ends of towel bars. Slide tool hooks onto towel bars as desired. Insert screws from
beneath shelf, through shelf holes and into ends of towel bar.Remove screws
and washers from both the rotisserie motor bracket and the spit rod bracket. Attach the rotisserie motor bracket to the right
side of the grill bottom using twoscrews,lock washers, andflat washersfrom
the outside and twohex nutson the inside of the grill bottom.
the grill bottom in the same manner.
#10-24(RRR)Attach the spit rod bracket to the left side of
#10-24x3/8”(OOO) 5mm(PPP)5mm(QQQ)
DO NOT USE TOWEL
BARS TO LIFT GRILL.
Repeat procedure on sideburner shelf.
RRR
6
Place flametamers (4) over burners by inserting tabs into slots in front of firebox. Opposite ends of flametamers rest on pins
in back of firebox.
NOTE: SwingAway
not shown for clarity.
Rotisserie motor bracket
OOOPPPQQQ
Spit rod bracket
(Left side of grill bottom)
Towel bar
Tool hook
Rotisserie motor bracket
(Right side of grill bottom)
Lock
washer
Towel Bar Hardware
Flat
washer
Front of firebox
Back of firebox
8 • 463247404
Flametamer
Flametamer
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.