Charbroil 4617238, 461732103 Owner's Manual
1
1
Qty: 6
Items to Assemble:
2 Leg Assemblies
1 Bottom Shelf
6 carriage Bolts
6 Wing Nuts
Left Side:
Place 1 Carriage Bolt
and Wing Nut in upper hole only
Qty: 6
Place Bottom Shelf and Legs as shown.
After assembling tighten all Wing Nuts.
Right Side:
Attach 2 Carriage Bolts and Wing Nuts in
front and back.
Items to Assemble:
2
Attach Wheels with Hitch Pins
2 Wheel Assemblies
2 Hitch Pins
2 Leg Extenders
Qty: 2
Item to Assemble:
3
ABAssemble front panel first by
1 Wire Shelf
1 Panel
2 Push Pins
placing tabs into slots on Bottom Shelf.
Attach with push pins.
Place Wire Shelf in 3rd hole from top.
Qty: 2
B
A
4
Items to Assemble:
1 Grill Bottom
1 Heat Shield
2 Carriage Bolts
2 Wing Nuts
Qty.2
Qty. 2
5
Items to Assemble:
1 Condiment Basket
6
Items to Assemble:
1 Right Shelf
4 Wing Screws
Qty: 4
7
Items to Assemble:
2 End Caps
1 Toolholder
1Carriage Bolt
1 Wing Nut
Qty: 1
Qty: 1
Place Carriage Bolt in right hole on Toolholder. Secure with Wing Nut.
8
Items to Assemble:
1 Sideburner Body
1 Sideburner Frame
1 Carriage Bolt
1 Wing Nut
1 Crown Screw
Qty: 1
Join Sideburner Body and Frame. In back center hole attach with Carriage Bolt and Wing Nut.
In front use a Crown Screw to attach Toolholder and Sideburner Body.
Qty: 1
Qty: 1
Items to Assemble:
1 Sideburner
9
1 Wing Nut
1 Sideburner Valve Cup
9
1 Sideburner Knob
1 Sideburner Grate
A
Place Sideburner into hole.
B
Attach Sideburner Valve Cup. Make sure
Sideburner Tube is inside of valve. Tighten
with Wing Nut.
C
Place Sideburner Knob and Grate
D
Attach long wire from beneath console
to electrode beneath Sideburner.
B
Correctly assembled Sideburner Tube in Valve
C
A
D
10
Items to Assemble:
1 Vaporiser Bar
1 Grate
Grate rest
Push Vaporiser Bar down onto rest
in Grill Bottom
11
Items to Assemble:
1 Grill Lid
2 Hinge Pins
2 Hitch Pins
1 Handle
2 Wing Nuts
1 Logo Plate
Qty: 2
Qty:2
Qty: 2
Hinge Pin
and Hitch Pin
Items to Assemble:
12
ABInsert pivot wire of Lower Warming Rack into Lid.
1 Lower Warming Rack
1 Upper Warming Rack
Flex leg wires to insert into Grill bottom.
Insert pivot wire of Upper Warming Rack into lid.
Flex leg wires to insert into loops on Lower Rack.
B
Leg wires on both Warming Racks
must run underneath surfaces.
Legs snap into loop
A
461732103
Loading...