Charbroil 10501572 Owner's Manual
Portable
Outdoor Firebowl
Model 10501572
For Outdoor Use Only
CAUTION
Some parts may contain sharp edges - especially as
noted in manual. Wear protective gloves if necessary.
CAUTION
Read and follow all safety statements, warnings,
assembly instructions and care & use directions
before attempting to assemble.
WARNING
All surfaces can be hot during use. Use protection as
required to prevent burning.
WARNING
Do not use this unit on or near combustible surfaces
or structures such as wood decks, dry leaves or
grass, vinyl or wood siding, etc. SEE OWNERS
MANUAL FOR IMPORTANT SAFETY INFORMATION.
DO NOT place any closer than 20 feet from any
combustible surface during use.
WARNING
NEVER LEAVE FIRE UNATTENDED!
Do not allow small children near flame. Hot embers
can fly out in breezy conditions. Adequate fire
extinguishing material should be readily available.
WARNING
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off
carbon monoxide, which has no odor. NEVER burn
charcoal inside homes, vehicles or tents.
42804545 11/30/09
PARTS DIAGRAM
A
C
E
F
G
PARTS LIST
B
D
Key Description Qty.
A Fire Screen 1
B Wood Grate 1
C Bonus Grate 1
D Fire Grate Lifter/Poker 1
E Fire Bowl 1
F Fire Bowl Ring 1
G Leg Assembly 4
Hardware Kit 1
Assembly Instructions, English 1
Assembly Instructions, Spanish 1
Carry Bag 1
HARDWARE KIT
Pivot
Pin
Qty: 4
No Tools Required for Assembly
Estimated time to complete assembly: 15 minutes
Hairpin
Clip
Qty: 4
Page 2
PRODUCT ASSEMBLY
Carefully remove all components from the carton. Check your parts against the parts list on page 2.
First, attach the Legs to the Fire Bowl Ring by aligning the holes in each Leg with the holes in the ring bracket. Insert a
Pivot Pin through the bracket and leg, then secure the pin in place with a
Hair Pin Clip
Hairpin Clip.
Fire Bowl
Pivot Pin
Ring
Ring
Bracket
Leg
Hole
Leg
Be sure that all Legs are folded out and placed into the locked open position. To do so, pull the Locking Pin outward
while rotating the Leg into position, then let go of the Locking Pin so that it engages the hole in the Ring Bracket.
1. Pull Locking Pin.
All legs shown in locked open position.
2. Rotate
leg outward
Page 3
Loading...