Charbroil 04301111 Owner's Manual
04201101
Budweiser Charcoal GrillBudweiser Charcoal Grill
®
Tools needed for assembly: Phillips screwdriver & 2 Adjustable wrenches
THIS UNIT IS HEAVY. DO NOT assemble without helper.
Some parts may contain sharp edges - especially as
noted in manual. Wear protective gloves if necessary.
Read and follow all safety statements, warnings,
assembly instructions and use & care directions before
attempting to assemble and cook.
42804006 (03-28-06)
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you.
It gives off carbon monoxide, which has no odor.
NEVER burn charcoal inside homes,
vehicles or tents.
04301111
STOP!
Missing a part?
No need to go back to the store!
The store where you made your purchase
does not stock parts for this item. If you
need parts, whether they are missing or
damaged, call the Customer Service toll
free Help Line.
Call us and we will gladly
ship the part you need.
PARTS LIST
Key Description Part No.
A......Wheel Kit ...............................55710123
B......Axle Kit .................................55710124
C......LegKit .................................55710125
D......Left Leg Extender Kit ......................55710126
E......Right Leg Extender Kit .....................55710127
F ......LegNet.................................29100557
G......AshCatcher Kit ..........................29100541
H......Handle Kit (Firebowl) ......................55710128
I ......Firebowl Kit..............................55710129
J ......Hood Kit ................................55710130
K......Windshield Kit............................55710131
L ...... .............................
M......Hood Handle Kit ..........................55710133
N......Fire Grate Hanger ........................29100895
O......Fire Grate ...............................29100894
P......Cooking Grate ...........................29100893
Bottom Shelf 29100535
Hardware Bag ...........................42000065
Assembly Instructions .....................42804006
Call Our Help Line
To insure your satisfaction and for follow-up service,
register your product online at:
www.grillregistration.com
2
PARTS DIAGRAM
P
O
K
N
I
I
H
G
J
I
F
J
J
M
C
A
D
B
L
E
3
Attach leg extenders to end of bottom shelf using one , and per
side.
Do not fully tighten flange nuts at this time.
1/4-20x1/2” machine screw 1/4” flat washer 1/4-20 flange nut
1
Right leg extender
Bottom shelf
1/4-20x1/2”
Machine screw
Left leg extender
Press two legs into leg extenders until full seated. Rotate legs until holes are aligned in leg extenders and legs are angled inward
toward bottom shelf. Secure legs to leg extenders and bottom shelf using one , and
2
1/4-20 flange nut Now fully tighten leg extender nuts installed in step 1.
per side.
1/4-20x1¾” machine screw 1/4” flat washer
1/4” Flat washer
1/4-20 Flange nut
1/4-20x1¾”
Machine screw
Leg
1/4” Flat washer
4
1/4-20 Flange nut
Fully tighten
these nuts after
legs are assembled.
Insert axle through holes in rear of bottom shelf. Slide a leg onto each end of axle,
front legs. 5/16-18 lock nut
3
Slide a wheel onto each end of axle and secure using one at each end. Snap hubcaps onto wheels.
Leg
WheelHubcap Axle
making sure legs are angled inward toward
5/16-18 lock nut
Attach firebowl to legs using two ,
and per leg.
4
1/4-20 flange nuts Front of firebowl, with two holes, should face
toward leg extenders. Back of firebowl should face toward wheels.
Rear of
firebowl four holes
firebowl two holes
1/4-20x1/2” machine screws 1/4” flat washers
Firebowl
Front of
Outside of firebowl
Inside of firebowl
1/4-20x1/2”
Machine screw
1/4” Flat
washer
1/4-20
Flange nut
5
Loading...