Charbroil 04201101 Owner's Manual
04201101
04201101
Smoker, BBQ and Grill
Smoker, BBQ and Grill
Tools needed for assembly:
Phillips screwdriver
Adjustable wrench
THIS UNIT IS HEAVY. DO NOT assemble without helper.
Some parts may contain sharp edges - especially as noted in
manual. Wear protective gloves if necessary.
Read and follow all safety statements, warning, assembly
instructions and use & care directions before attempting to
assemble and cook.
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill
you. It gives off carbon monoxide,
which has no odor. NEVER burn
charcoal inside homes, vehicles
or tents.
42803968 (12-02-03)
STOP!
Missing a part?
No need to go back to the store!
The store where you made your purchase
does not stock parts for this item. If you
need parts, whether they are missing or
damaged, call the Customer Service toll
free Help Line.
Call us and we will gladly ship
the part you need
FREE OF CHARGE.
Call Our Help Line
ITEM DESCRIPTION
55700462 SMOKE CHAMBER KIT
55700463 FIREBOX KIT
55700195 WOOD SHELF KIT
55700442 AXLE KIT
55700443 WHEEL KIT
55700198 LEG BRACE KIT
55700468 SMOKESTACK KIT
55700200 SHORT LEG KIT
55700201 LONG LEG KIT
55700202 SHELF BRACKET KIT
55700203 KNOCKOUT COVER KIT
55700204 DOOR LATCH KIT
55700205 LOGO PLATE KIT
55700206 8” WOOD HANDLE KIT
55700472 BUTTERFLY DAMPER KIT
40011202 CARTON
42000035 HARDWARE BAG
42803968 ASSEMBLY INSTRUCTIONS
10000074 LEG CAPS
40009916 PORCELAIN COOKING GRATE SET
PARTS LIST
40022811 FIRE GRATE SET (2)
46030090 WOOD RACK
44830150 GREASE CAN HOLDER
2
1
• Attach one long leg and one short leg to
make two leg assemblies
Note: Short leg has two holes.
Short Leg
Long Leg
• Position wood rack between legs and
2
insert hooked ends of rack into holes on
insides of legs.
Note: Rack wires running front-to-back
should be on bottom, side-to-side wires on
top.
Wood Rack
3
• Lay unit onto its back.
3
• Attach leg braces on each side using four #1024 x 1-3/4” screws and four 10-24 flange nuts
per brace.
• Thread axle rod through both short legs.
• Attach wheels onto axle rod using cotter pins.
Bend cotter pin ends to prevent them from
backing out of axle as shown in box A.
• Push leg caps onto long legs.
Leg Cap
Axle
A
Cotter Pin
Wheel
Axle
Leg
Brace
Cotter pin
STAND UNIT ON RIGHT END
4
• Attach with two 1/4-20 x 2” screws and two
1/4-20 flange nuts per leg.
Fully tighten all screws and nuts.
Lid removed for clarity
Smoker Chamber
Smokestack Hole
4
Loading...