Channel Vision VDA-12 User Manual
CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
TM
CVHANNEL ISION
VDA-12
Audio/Video Distribution Amplifier
CVHANNEL ISION
234 Fischer Avenue Costa Mesa, CA 92626
(714) 424-6500 (800) 840-0288 (714) 424-6510 fax
www.channelvision.com email: sales @ channelvision.com
··
·
·
TM
500-022 rev B
© 2004, Channel Vision™
Description:
Channel Vision’s VDA-12 is an audi o and base-band video distribution
amplifier. It can expand the RCA output socket of your AV equipment by
incorporating an audio input and a video input, which are distributed to
twelve audio/video outputs. A built -in clamp circuit was designed to
eliminate up & down roll pictures. The VDA-12 offers optimal picture
quality with the audio/video cascade outputs that feature automatic video
impedance. Overall, the VDA-12 is especially useful for connecting
audio/video components to RF modulators or multiple zones.
Specifications:
Audio: Video:
Input Impedance 20K ohm 1K ohms
Output Impedance 600ohms 75 ohms
Gain 11dB 6dB
Clamp Cability 60dB
Frequency Response 20Hz to 20XHz 20Hz to 8MHz
Max. Input 5Vp-p 4Vp-p
Max. Output 4.5Vp-p(4/7x Load) 1.8Vp-p(75ohms
load)
Power Requirement AC 110V/60Hz or AC 220V/50Hz
Power Consumption 5W (Max.)
Laser Disk Player
USINGTHE VDA-12 FOR MULTI-ROOM
VIDEO DISTRIBUTION
Satellite Receiver
AUDIO / VIDEO PRE-AMP OR
RECEIVER
A/V INPUTS VIDEO OR REC OUT
CHANNEL VISION
VDA-12
I
N
VIDEO
P
U
T
AUDIO
AUDIO
LEVEL ADJUST
VIDEO DISTRIBUTION AMPLFIER
VCR
FUSE
FUSE
O
U
VIDEO
T
AUDIO L
P
AUDIO R
U
T
Features:
¿
Gold plated RCA connectors
¿
17” component, space saving – inline power adapter
¿
Black brushed aluminum
¿
Low distortion
¿
1 – Set AV input, 12 – Set AV output
¿
Dimensions: 3-1/8” x 17-1/8” x 9-1/2” (H) x (W) x (D)
AUDIO / VIDEO OUTPUT
Loading...