
TE110DS
CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
Door strike relay
for the TE110
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-052
CVHANNEL ISION
(714) 424-6500 (800) 840-0288 (714) 424-6510 fax
www.channelvision.com email: sales @ channelvision.com
© 2004 Channel Vision Technolo
234 Fischer Avenue Costa Mesa, CA 92626
··
·
·
TM

The TE110DS is a relay contact that can be activated by the
TE110 when the homeowner dials the appropriate touch
tone code from any of the house telephones. See diagram
for details.
TE110DS
House
Telephone Service
Provider
Power
Line
TE110
(Sold Separately)
Tel
Strikeduration
Seconds S1 S2 S3
15
20
40
120
240
3
off
off
5
off
8
off
on
on
on
on
House
Telephones
Intercom
S4S5S6
5
On
Yes
off off
off
on
on
off
off
on
on
#
Off
No
3
*
on
off
on
off
#of rings
2x3ring
patern
Keyon
on
off
on
The duration of the contact closure is
programmed using the dip switches
located on the TE110 (sold separately).
The chart below shows how to change
phone
the closure duration which is variable
between 3 - 240 seconds.
Intercom
Door strike
power supply
(NOT SOLD BY CHANNEL VISION)
Strike
Door strike
Mechanism
(NOT SOLD BY CHANNEL VISION)
Basic Operation:
Strike duration
S1
On
Off
2
Seconds S1 S2 S3
3
5
8
15
20
40
120
240
off
off
off
off
on
on
on
on
off off
on
off
off
on
on
on
off
off
on
off
on
off
on
on
S3
S2
To close the door strike relay while you are already
communicating with the door speaker, press #7 (or *7).
To close the door strike relay when you are not
communicating with the door speaker, press ## (or **)
and then press #7 (or *7).