Page 1
CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase.This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-076 RevA
Hinged rack mount plate
P-1300
CVHANNEL ISION
TM
© 2004 Channel Vision Technolo
gy
234 Fischer Avenue Costa Mesa, CA 92626
(714) 424-6500 (800) 840-0288 (714) 424-6510 fax
www.channelvision.com email: sales @ channelvision.com
·
··
·
C
V
HANNEL
ISION
TM
Page 2
2
Rack mounting holes
Hinge
The P-1300 from Channel Vision’s Pro-series product line is
a hinged plate designed to fit into a standard 19” rack. It
features a hole pattern that is compatible with Channel
Vision Central modules as well as the new Channel Vision
Pro-series, making it the perfect home for modules from
either product line.
The hinges open to
maintain a clean look while
providing easy access for
servicing equipment.
P-1300
IR
R
e
c
e
iv
e
r
M
odel
IR
-1005
Pwr
Expansion
Global
Zone
Zone
Global
E
m
i
tt
e
r
s
+12DC
IR
Receiver
C
V
HANNEL
ISION
T
M
C
V
HANNEL
ISION
T
M
CV
HANNEL ISION
TM
Central
C-0508
Route wiring along the top and bottom
of the plate as shown.
Direct the wires behind the hinge
down the side of the rack. .
Additional notes:
By directing your wiring down the side of the rack, you will
force the wires to twist rather than bend. This will help
maintain the proper bend radius and ensure the integrity and
longevity of the wiring.
3
IR
Receiver
Model
IR-1005
Pwr
Expansion
Global
Zone
Zone
Global
E
m
itters
+12DC
IR
Receiver
C
V
HANNEL
ISION
TM
C
V
HANNEL
ISION
TM
CV
HANNEL ISION
TM
Central
C-0508
Wi
re management
Loading...