Channel Vision OS525 User Manual
p
p
10
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
roduct with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
roof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
www.channelvision.com
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: techsupport@channelvision.com
500-027 rev D
OS525
5.25” Marine/Outdoor Speaker
8
Model OS525
Specifications:
To set your OS525 on a shelf,
attach the rubber feet here
Frequency range:
Sensitivity:
Power Handling:
Drivers:
45Hz - 20kHz ± 3dB
89dB (1W/1M)
100 Watts
1- 25mm soft dome tweeter
1- 5.25” woofer w/ 1” voice coil
Impedance:
Finish:
Dimensions:
Weight:
6 ohms
ABS plastic
11”Hx6 ”Wx71/2”D
3/4
5.2 Lbs with bracket
Specifications subject to change without notice.
Installation:
The OS525 may be mounted vertically or horizontally.
h
The OS525’s case is weather resistant and made with UV
1) Weather resistant design
2) Aluminum grilles, and brackets
3) hardware
Stainless steel
4) abinet resists sun fade
UV protected c
) 14 AWG gold plated terminal posts
5
) 5.25" woofer with mica mix cone
6
) 1" soft dome tweeter
7
) 18dB /octave crossover network
8
) Tweeter protected by poly switch
9
2
h
stabilized ABS. But for longest life, we recommend
placement in a protected area, such as under an eave.
We recommend wiring with AWG 16 or larger, stranded
h
wire.
For proper phasing, both speakers must be wired alike.
h
Connect red wire to red terminal on speakers and to red
or plus terminal on amplifier.
To control the volume of the speakers locally, use an
h
impedance matching volume control, such as the
Channel Vision VC-302.
3
Loading...