Channel Vision IC612 User Manual
p
p
10
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
roduct with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
roof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-183rev A2
IC612
6.5” IN-CEILING SPEAKER
TM
By
7
Model IC612
Channel Vision’s ARIA™ in-ceiling custom
installation speakers feature high power handling capability
providing true stereo quality sound and not simply
background music. The pivoting tweeters can be aimed to
any position to custom fit any room, making them perfect for
whole-house audio or home theater applications. High
quality materials ensure long life and great performance.
Gold speaker wire terminals not only provide better contact
surface but also offer less resistance to signal transfer for a
clearer sound.
IC612 6.5”
Installation:
Use the provided template to mark and cut a 7- ¾” hole in
h
drywall away from ceiling joists.
We recommend wiring with AWG 16 or larger, stranded
h
wire.
For proper phasing, both speakers must be wired alike.
h
Connect red wires to red terminals on the speakers and
to red or plus terminals on the amplifier.
Install IC612 in the hole. Tighten the mounting screws.
h
The mounting “dogs ears” will rotate outward and grip the
drywall. the screws
O OT VER IGHTEN
DN O T . A battery
operated drill on a “low clutch” setting is recommended.
Features:
6.5” High performance in-ceiling loudspeaker
h
High power handling capacity
h
Recommended power: 20W to 160W (peak)
h
Gold speaker terminals
h
Proprietary pivoting “Pole Piece” technology with 1” voice
h
coil.
Polypropylene woofer with butyl rubber surround and an
h
18 ounce magnet
Small perforated designer grill
h
Aim tweeter
h
To control the volume of the speaker locally, use an
h
impedance matching volume control, such as the
Channel Vision VC300.
Specifications:
Frequency range:
Crossover:
Sensitivity:
Power Handling:
Drivers:
Magnet:
Impedance:
Finish:
Dimensions:
45Hz - 20kHz ± 6dB
12dB/octave (low pass)
12dB/octave (high pass)
90dB (1W/1m)
160 Watts peak
1- 1” Soft dome tweeter
1- 8” polypropylene woofer
18-ounce ferrite magnet
8 ohms
ABS plastic
9” OD. 4 height
”
(from surface of wall board)
hole size: 7-¾” diameter
2
Mounting screws (4)
Specifications subject to change without notice.
3
Loading...