Channel Vision DP-XXXXP, DP-XXXX, DP-XXXXC User Manual

DP-XXXX
DP-XXXXC
DP-XXXXP

Telephone Entry Door Intercom

7

Channel Vision’s -Series are 1/4" solid brass door plates that interface

DP

with a telephone entry controller to provide communication with the front
door. They are available in a variety of configurations including options for a
hidden camera and compatibility with Panasonic’s popular KSU phone
systems. Each plate comes with the or surface mount box
(depending on the finish color). It is compatible with the

DP-9001 DP-9002

DP-Rbox-II flush

mount box, which is sold separately.

Features:

1/4” thick solid brass plate

h

Discrete speaker and microphone

h

Fits the DP-Rbox-II flush mount box, and the DP-9001, DP-9002 surface

h

mount boxes.

Available in 9 different finishes

h

3

4 / ”

8

7

6 / ”

16

DP-Series Faceplate

(included)

7

6 / ”

16

3

4 / ”

8

DP-9001 or DP-9002

Surface Mount Box

2

(included)

3

1 / ”

4

1

6 / ”

8

4”

1

3 / ”

4

DP-Rbox-II

Flush Mount Box

(optional)

Understanding the model number:

Part numbering: DP door plates

DP-0212C

Understanding the compatibility options

There are three different types of systems that DP door plates can be
used with. The compatibility for these different types of systems is
indicated by the suffix of the model number which follows the 4-digit
numerical code.

(DP-0212C shown for example only)

Blank P-0920, P-0921, & TE110/C-0920 compatible
C P-0930 compatible
P Panasonic compatible

212 White
222 Polished Brass
232 Antique Brass
242 Chrome
252 Oil Rubbed Bronze
262 Antique Copper
272 Satin Silver
282 Black
302 Satin Nickel

0 No camera
5 Black and white camera
6 Color camera

If there is not a letter suffix on the model number, such as DP-0212,
that door plate is compatible with Channel Vision’s telephone entry
products including models P-0920, P-0921, C-0920, and TE110.

If the suffix is the letter “P”, such as DP-0212P, then the door plate is
compatible with Panasonic’s phone systems which are designed to
use the Panasonic door phone model: KXT-30865.

If the suffix is the letter “C”, such as DP-0212C, then the door plate is
compatible with Channel Vision’s Whole-House CAT5 Intercom Hub,
model P-0930.

Please double check to be sure that you have purchased the correct
model number for your application.

3

Attaching the Companion Board

(DP-XXXX and DP-XXXXP)

This door intercom product consists of two sub assemblies which must be
attached to each other before the final assembly can be installed. In this
guide the electronic sub assembly will be referred to as the “Companion
Board” and the mechanical assembly will be referred to as the “Door Plate.”
Review the following diagrams and assemble as shown.

Companion Board Connection Details

To Button

To Speaker

Microphone

Remove the plastic cap that covers the microphone compartment on the
door plate. Place the microphone in the compartment and replace the plastic
cap over the microphone. Note that the plastic cap will form a friction fit over
the top of the microphone wires holding them snug against the outer
compartment wall until they exit at the base as shown. Remove the mounting
screws which are already attached to the bracket and use them to attach the
companion board. The companion board should mount on the front side of
the bracket so that the screws pass through the companion board before
threading into the bracket.

Completed Sub-assembly

4

Companion Board

Attach Companion Board
with mounting screws

Connect Telephone Entry Controller here
(see following pages for details)

Place pressure cap
over microphone

Attach button
and speaker
wires as shown