Channel Vision DP-XXXXP, DP-XXXXC, DP-9001, DP-9002, DP-0212C User Manual
...
DP-XXXX
DP-XXXXC
DP-XXXXP
Telephone Entry Door Intercom
7
2
Channel Vision’s -Series are 1/4" solid brass door plates that interface
with a telephone entry controller to provide communication with the front
door. They are available in a variety of configurations including options for a
hidden camera and compatibility with Panasonic’s popular KSU phone
systems. Each plate comes with the or surface mount box
(depending on the finish color). It is compatible with the
DP
DP-9001 DP-9002
DP-Rbox-II flush
mount box, which is sold separately.
Understanding the model number:
Understanding the compatibility options
Part numbering: DP door plates
DP-0212C
Features:
h
h
h
h
1/4” thick solid brass plate
Discrete speaker and microphone
Fits the DP-Rbox-II flush mount box, and the DP-9001, DP-9002 surface
mount boxes.
Available in 9 different finishes
There are three different types of systems that DP door plates can be
used with. The compatibility for these different types of systems is
indicated by the suffix of the model number which follows the 4-digit
numerical code.
If there is not a letter suffix on the model number, such as DP-0212,
that door plate is compatible with Channel Vision’s telephone entry
products including models P-0920, P-0921, C-0920, and TE110.
If the suffix is the letter “P”, such as DP-0212P, then the door plate is
compatible with Panasonic’s phone systems which are designed to
use the Panasonic door phone model: KXT-30865.
If the suffix is the letter “C”, such as DP-0212C, then the door plate is
compatible with Channel Vision’s Whole-House CAT5 Intercom Hub,
model P-0930.
Please double check to be sure that you have purchased the correct
model number for your application.
7
6 / ”
16
3
4 / ”
8
3
1 / ”
4
DP-9001 or DP-9002
Surface Mount Box
(included)
7
6 / ”
16
3
4 / ”
8
DP-Series Faceplate
(included)
1
6 / ”
8
4”
1
3 / ”
4
DP-Rbox-II
Flush Mount Box
(optional)
3
Understanding the model number:
Understanding the compatibility options
(DP-0212C shown for example only)
Part numbering: DP door plates
DP-0212C
Blank P-0920, P-0921, & TE110/C-0920 compatible
C P-0930 compatible
P Panasonic compatible
212 White
222 Polished Brass
232 Antique Brass
242 Chrome
252 Oil Rubbed Bronze
262 Antique Copper
272 Satin Silver
282 Black
302 Satin Nickel
0 No camera
5 Black and white camera
6 Color camera
There are three different types of systems that DP door plates can be
used with. The compatibility for these different types of systems is
indicated by the suffix of the model number which follows the 4-digit
numerical code.
If there is not a letter suffix on the model number, such as DP-0212,
that door plate is compatible with Channel Vision’s telephone entry
products including models P-0920, P-0921, C-0920, and TE110.
If the suffix is the letter “P”, such as DP-0212P, then the door plate is
compatible with Panasonic’s phone systems which are designed to
use the Panasonic door phone model: KXT-30865.
If the suffix is the letter “C”, such as DP-0212C, then the door plate is
compatible with Channel Vision’s Whole-House CAT5 Intercom Hub,
model P-0930.
Please double check to be sure that you have purchased the correct
model number for your application.
The DP-5xxx, DP-5xxxP, DP-6xxx, and DP-6xxxP come with a mini camera
that can be attached to the integrated mount that allows the camera to see
through the opening in the plate. The illustrations bellow show how to mount
the camera.
Mini Pinhole Camera
Break away the section of perforated metal screen that covers the camera
opening by pushing a screwdriver through the slot on the front of the door
plate. Press near the top or bottom of the section and the tabs that hold it in
place will break free. Attach the camera to the mount so that the cone of the
camera points through the opening. Adjust the camera to the desired position
and secure it in place by tightening the screw in the mount.
This door intercom product consists of two sub assemblies which must be
attached to each other before the final assembly can be installed. In this
guide the electronic sub assembly will be referred to as the “Companion
Board” and the mechanical assembly will be referred to as the “Door Plate.”
Review the following diagrams and assemble as shown.
Attaching the Companion Board
(DP-XXXX and DP-XXXXP)
Companion Board Connection Details
To Button
To Speaker
Microphone
Companion Board
Connect Telephone Entry Controller here
(see following pages for details)
Place pressure cap
over microphone
Completed Sub-assembly
Attach button
and speaker
wires as shown
Attach Companion Board
with mounting screws
Remove the plastic cap that covers the microphone compartment on the
door plate. Place the microphone in the compartment and replace the plastic
cap over the microphone. Note that the plastic cap will form a friction fit over
the top of the microphone wires holding them snug against the outer
compartment wall until they exit at the base as shown. Remove the mounting
screws which are already attached to the bracket and use them to attach the
companion board. The companion board should mount on the front side of
the bracket so that the screws pass through the companion board before
threading into the bracket.
4
Loading...