Channel Vision C-1333 User Manual

10

Channel Vision Technology will repair or replace any defect in

material or workmanship which occurs during normal use of this

product with new or rebuilt parts, free of charge in the USA, for ten

years from the date of original purchase. This is a no hassle warranty

with no mail in warranty card needed. This warranty does not cover

damages in shipment, failures caused by other products not supplied

by Channel Vision Technology, or failures due to accident, misuse,

abuse, or alteration of the equipment. This warranty is extended only

to the original purchaser, and a purchase receipt, invoice, or other

proof of original purchase date will be required before warranty

repairs are provided.

Mail in service can be obtained during the warranty period by calling

[phone] toll free. A Return Authorization number must be

obtained in advance and can be marked on the outside of the shipping

carton.

This warranty gives you specific legal rights and you may have other

rights (which vary from state to state). If a problem with this product

develops during or after the warranty period, please contact Channel

Vision Technology, your dealer or any factory-authorized service

center.

C-1333

Security interface

CV

HANNEL ISION

TM

C-1333

Security System Phone Line Interface

500-154 rev A

6

The

3

C-1333 provides a telephone line interrupt, to allow security systems

to seize the phone line and dial the alarm company.

Unlike many
competitive products that use a spring loaded connector to engage the
interrupt circuit, the C-1333 utilizes a two-position switch slide switch.
This ensures rugged and reliable performance.

Features:

!

Two position slide switch

!

Add RJ-31X function to any phone distribution system

!

Easy to instal

!

Cost effective

Using the C-1333

When the service jack is engaged it interrupts the phone line to allow an
alarm panel to seize the telephone line allowing it to call out when there is
an emergency. The security port can be engaged and disengaged by
changing the position of the slide switch located to the right. When this
switch is in the “NORM” position, the security system will be in the circuit.
When this switch is in the “BYP” position, the security system will be
bypassed.

Tip

C-1333

Security interface

CV

HANNEL ISION

TM

8-pin service jack for security system
connection.

Bypass switch... allows the
phone system to bypass the
security system.

Telephone line input
(punchdown connector)

Pin 1

Pin 8

SERVICE

C-1333

Security interface

CV

HANNEL ISION

Tip

Ring

Ring

Security

System

Telephone line input

TM

Telephone line output
(punchdown connector)

Note: Use a 110 tool to connect wires to the punchdown
connectors. Using an improper tool will damage the
connectors.

2

Telephone line output