Channel Vision C-1312, C-1311 User Manual
10
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
CV
HANNEL ISION
Central
CV
HANNEL ISION
Central
TM
TM
C-1311
C-1312
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-044 RevB1
C-1311 & C-1312
Universal Product Holders
The and are universal product holders which
Maki
C-1311 C-1312
can be used to mount a variety of products inside the
Channel Vision Central structured wiring enclosure.
ng adjustments
Rotate the product
to find the best fit.
The universal product holders
can be used to mount both
square and irregularly shaped items.
CV
HANNEL ISION
Central
11.25”
2” max. depth *
Foam padding
CV
helps cushion
equipment
HANNEL ISION
Central
TM
C-1312
Loosen thumb screws
to adjust the depth
of the C-1311 or C-1312
TM
C-1311
CV
HANNEL ISION
Central
TM
C-1311
Tighten thumbscrews
to secure product.
2” max. depth *
4.75”
CV
HANNEL ISION
Central
CV
TM
HANNEL ISION
Central
TM
* By removing the thumb screws and
reversing the position of the adjustable
plate (as shown below), you can
increase the maximum depth to 3.25”.
C-1312
C-1312
3.25” max. depth *
2
3
Loading...