Channel Vision C-0128D, C-0150D, C-1322, C-0138D User Manual

CHANNEL VISION

Limited Warranty

Channel Vision Technology will repair or replace any defect in

material or workmanship which occurs during normal use of this

product with new or rebuilt parts, free of charge in the USA, for two

years from the date of original purchase. This is a no hassle warranty

with no mail in warranty card needed. This warranty does not cover

damages in shipment, failures caused by other products not supplied

by Channel Vision Technology, or failures due to accident, misuse,

abuse, or alteration of the equipment. This warranty is extended only

to the original purchaser, and a purchase receipt, invoice, or other

proof of original purchase date will be required before warranty

repairs are provided.

Mail in service can be obtained during the warranty period by calling

[phone] toll free. A Return Authorization number must be

obtained in advance and can be marked on the outside of the shipping

carton.

This warranty gives you specific legal rights and you may have other

rights (which vary from state to state). If a problem with this product

develops during or after the warranty period, please contact Channel

Vision Technology, your dealer or any factory-authorized service

center.

500-100 RevB

C-1322

Fan Kit for models:
C-0128D, C-0138D, & C-0150D

The C-1322 fan kit is compatible with Channel Vision’s new

2

otto

designer doors: C-0128D, C-0138D, and C-0150D.

Features:

!

Provides increased airflow through the enclosure

!

Extenends the life expectancy of heat sensitive electronics

!

Quick and easy installation

What is included:

4) Mounting screws

.

Install vent seals:

Sealing the vents adjacent to the fan will force air into the fan,
making it more effective.

3.

Mount the fan:

Attach the fan with the screws provided.

1) 40mm fan

Installation:

4) Tape dots

1) 12VDC power supply

2) Vent seals

To p

1. Determine the desired fan location:
The top and bottom sections of the C-0128D,
C-0138D & C-0150D are identical, allowing the
C-1322 fan kit to be installed in either the top
or bottom of the door. Mounting the fan at the
top is recommended for most applications.

Bottom

4.

Route the fan wire:

All compatible doors have a groove for routing the fan wire.
Place the wire in the groove and secure it with the tape dots.

To p

Fan

Power supply
connection

Tape dots

2

C-0150D shown

for reference only

B

m

3