Channel Vision B-204 User Manual

1

Channel Vision Technology will repair or replace any defect in material or

workmanship which occurs during normal use of this product with new or

rebuilt parts, free of charge in the USA, for one year from the date of

original purchase. This is a no hassle warranty with no mail in warranty

card needed. This warranty does not cover damages in shipment, failures

caused by other products not supplied by Channel Vision Technology, or

failures due to accident, misuse, abuse, or alteration of the equipment. This

warranty is extended only to the original purchaser when purchased

through an authorized reseller. A purchase receipt, invoice, or other proof

of original purchase date will be required before warranty repairs are

provided. Channel Vision products are not intended for use in medical,

lifesaving, life sustaining or critical environment applications. Channel

Vision customers using or selling Channel Vision products for use in such

applications do so at their own risk and agree to fully indemnify Channel

Vision for any damages resulting from such improper use or sale.

Mail in service can be obtained during the warranty period by calling (800)

840-0288 toll free. A Return Authorization number must be obtained in

advance and can be marked on the outside of the shipping carton.

This warranty gives you specific legal rights and you may have other rights

(which vary from state to state). If a problem with this product develops

during or after the warranty period, please contact Channel Vision

Technology, your dealer or any factory-authorized service center.

234 FischerAvenue, Costa Mesa, California 92626 USA

[phone] [phone] [phone] fax

www.channelvision.com

email: [e-mail]

500-303 rev B

B-204

IP Camera Over Coax Converter Kit

2

1

1

Channel Vision Technology will repair or replace any defect in material or

workmanship which occurs during normal use of this product with new or

rebuilt parts, free of charge in the USA, for one year from the date of

original purchase. This is a no hassle warranty with no mail in warranty

card needed. This warranty does not cover damages in shipment, failures

caused by other products not supplied by Channel Vision Technology, or

failures due to accident, misuse, abuse, or alteration of the equipment. This

warranty is extended only to the original purchaser when purchased

through an authorized reseller. A purchase receipt, invoice, or other proof

of original purchase date will be required before warranty repairs are

provided. Channel Vision products are not intended for use in medical,

lifesaving, life sustaining or critical environment applications. Channel

Vision customers using or selling Channel Vision products for use in such

applications do so at their own risk and agree to fully indemnify Channel

Vision for any damages resulting from such improper use or sale.

Mail in service can be obtained during the warranty period by calling (800)

840-0288 toll free. A Return Authorization number must be obtained in

advance and can be marked on the outside of the shipping carton.

This warranty gives you specific legal rights and you may have other rights

(which vary from state to state). If a problem with this product develops

during or after the warranty period, please contact Channel Vision

Technology, your dealer or any factory-authorized service center.

234 Fischer Avenue, Costa Mesa, California 92626 USA

[phone] [phone] [phone] fax

www.channelvision.com

email: [e-mail]

500-303 rev B

B-204

IP Camera Over Coax Converter Kit

2

1

Model B-204

The B-204 IP Camera Over Coax Converter Kit is a perfect
solution for updating analog based security cameras to IP based
cameras by using the original coax cabling infrastructure.

The B-204 enables the transmission of an IP camera over 300’
of RG-59/6 video grade coax cable and supports up to 10Mbps
bandwidth. The B-204 is a passive device with no additional
power requirements. By using the existing coax and power
cables, the B-204 can create a more scalable, manageable
solution without the need to run new wire. The B-204 can
connect to any standard network router or switch and supports
IP cameras, including Channel Vision’s 2 megapixel HD dome
(6521), bullet (6522), and flush mount (6524) IP cameras, as well
as its 1.3 megapixel indoor dome (6530).

Installation Diagram

Up to 300 ft.

of

RG cable

Any standard network

router or switch

Features:

• Sends video over 300’ of coax cable

• Compatible with Category 5, 5e and 6 wiring

• Small size allows installation in crowded spaces

• Kit contains (1) transmitter and (1) receiver

RJ-45 connector

for Ethernet

(T568B)

BNC connector

for standard

75-ohm video cable

2

Model B-204

The B-204 IP Camera Over Coax Converter Kit is a perfect
solution for updating analog based security cameras to IP based
cameras by using the original coax cabling infrastructure.

The B-204 enables the transmission of an IP camera over 300’
of RG-59/6 video grade coax cable and supports up to 10Mbps
bandwidth. The B-204 is a passive device with no additional
power requirements. By using the existing coax and power
cables, the B-204 can create a more scalable, manageable
solution without the need to run new wire. The B-204 can
connect to any standard network router or switch and supports
IP cameras, including Channel Vision’s 2 megapixel HD dome
(6521), bullet (6522), and flush mount (6524) IP cameras, as well
as its 1.3 megapixel indoor dome (6530).

6521 IP Camera

Installation:

Connect video signal to the BNC connector of the B-204

•

Attach aT568B standard CAT5 cable to the RJ-45

•

connector on each balun

Specifications:
Video In/Out:
Transmission distance:
RJ-45 Connector standard:
Coax Cable:
Wire type: UTP Category5,5e
Dimensions:
(Without connectors)

Data Rate:

BNC male connector
Max. 300 ft.
T568B
RG-59/RG-6

W 38mmxD28mmxH15mm

10Mbps

*Specifications subject to change without notice.

Installation Diagram

Up to 300 ft.

of

RG cable

Any standard network

router or switch

3

Features:

• Sends video over 300’ of coax cable

• Compatible with Category 5, 5e and 6 wiring

• Small size allows installation in crowded spaces

• Kit contains (1) transmitter and (1) receiver

RJ-45 connector

for Ethernet

(T568B)

BNC connector

for standard

75-ohm video cable

2

6521 IP Camera

Installation:

Connect video signal to the BNC connector of the B-204

•

Attach aT568B standard CAT5 cable to the RJ-45

•

connector on each balun

Specifications:
Video In/Out:
Transmission distance:
RJ-45 Connector standard:
Coax Cable:
Wire type: UTP Category5,5e
Dimensions:
(Without connectors)

Data Rate:

BNC male connector
Max. 300 ft.
T568B
RG-59/RG-6

W 38mmxD28mmxH15mm

10Mbps

*Specifications subject to change without notice.

3