Channel Vision AB-315 User Manual

AB-315

iBus Wall-Dock for A-Bus Audio Systems

®

By

1

0

TM

The AB-315 for A-BUS a

is an on-wall iPod docking station udio

®

®

systems. The dock connector slides in and out to adjust for any iPod and
the non-skid pad helps to hold the music player in place. With all the
popular features of AB-313, the new AB-315 adds elegant and
contemporary styling to make it the perfect choice for anyone who wants
to enjoy their music without defacing their wall. (See Made For section on
page 3 for a list of compatible iPods.)

Features:

!

Compatible with all A-BUS audio systems

!

Charges the iPod

!

Senses audio to automatically override the main audio source

!

Supports IR control: compatible with A0505 or Apple Remote

!

Uses CAT5 cabling

!

Mounts in a standard 2-gang box

Wall Dock

Front/Top

Hinged Dock Lid

Rotates down to
cover the dock
connector

Dock Connector

Connects to iPod

Non-Skid Pad

Secures the iPod

Sliding Dock Platform

Slides up to conceal
the dock connector

Sliding Dock Lever

Slide Up

Slides the dock connector forward, providing
easy access to dock your iPod

Input RJ-45 & 110 Connectors

Connect to CAT5 Audio Hub
CAT5 cable (only use one)

Front/Bottom

Output RJ-45 & 110 Connectors

Connect to CAT5 Audio Amplifier Input
CAT5 cable (only use one)

2 3

Snap trim
into place

Installing the Trim Plate Accessory

Install Output
wall plate in j-box

Install Trim plate chassis

over output wall plate
Snap front cover
over chassis

Snap side flange on
to front cover

Made For:

!

iPod touch (2nd generation)

!

IPod touch (1st generation)

!

iPod classic

!

iPod video

!

iPod nano (5th generation)

Compatibility

!

iPod nano (4th generation)

!

iPod nano (3rd generation)

!

iPod nano (2nd generation)

!

iPod nano (1st generation)

!

iPod mini

!

iPod with dock connector

System Wiring Diagram

Using the AB-315 as a local source input module

P-1014

L

E

NN

HA

C

Tape Monitor or
Room 2 output

Sat radio

DVD player

CD player

Receiver

Priority

System

TM

N

O

I

S

I

Model

P-1014

Input

System

Signal

Local

R

Local

L

Input

PRO

Zone 2

Zone 1

A-BUS Distribution Module

x

1 4

V

Zone 3

IR

Emitters

Expansion

Output

Zone 4

Power

Status

+24VDC

+12VDC

CHA NN EL V ISI ON

Source

4

(Optional) IR emitters

Pwr

AB-315

(Rear)

AB-124

TM

ON

I
S
I

V

EL

NN

A

H

C

POWER

MODEL

1

A0501

S

2

O
U
R
C

3

E

4

ZONE

POWER

A0501,

MUTE

VOL

A0502,

or

A0505

Speakers

The shuttle control buttons
on the A0501, A0502, &
A0505 remotes can be
used to control the iPod.

AB-315

(Front)

System Wiring Diagram

Using the AB-315 as a main source input module

AB-315

(Rear)

Tape Monitor or
Room 2 output

Sat radio

DVD player

CD player

Receiver

CHA NNE L VI SI ON

Pwr

Source

System

Input

Priority

Local

L

Input

Model

P-1014

Signal

R

Zone 1

System

Local

P-1014

EL

NN

A

H

C

TM

N

IO

IS

V

PRO

Zone 3

Zone 2

A-BUS Distribution Module

x

1 4

IR

Emitters

CHA NNE L VI SI ON

Pwr

Source

CHA NNE L VI SI ON

Pwr

Source

AB-124

Expansion

Output

Zone 4

Power

Status

+24VDC

+12VDC

(Optional) IR emitters

In this configuration, an iPod docked in the
AB-315 will override the other audio source
whenever the iPod is playing (note the
position of the priority switch on the P-1014).

The iPod can be controlled by pointing an
A0501 or A0502 remote control at any of the
amplified keypads.

CHA NNE L VI SI ON

Pwr

Source

TM

ON
I

S

VI

L

E

NN

A

H

C

POWER

MODEL

1

A0501

S

2

O
U

A0501,

R
C

3

E

4

ZONE

POWER

A0502,

MUTE

VOL

or

A0505

5

Installing the Wall Dock

Installation Steps

1. Connect all wiring.

2. Attach main chassis to j-box using
the provided four 6-32 screws.

3. Feed the dock connector circuit
board through the opening in the
front cover.

4. Hang the front cover on the main
chassis from the two top tabs.

5. Secure the front cover with the
two small screws at the bottom.

6. Place the dock platform over
the slide rail and push
downward until the retention
snaps are engaged.

7. Slide the side protectors
into the slots on the main
chassis.

5

6

5

7

4

3

1

2

3

2

2

Slide Rail

6

Retention

Snap

Steps 3 & 4 complete

6

Steps 5 & 6 complete

Completed Installation

Installing the Wall Dock

(3-gang Installation)

In some installations it may be desirable to mount a single gang control
keypad next to the AB-315. To accomplish this, the single gang trim plate
can be installed next to the AB-315 in a 3-gang junction box.
Follow the steps below:
Installation Steps

1. Connect all wiring. Use the correct
installation tools: J-110 tool, or
1014 crimp tool.

2. Install keypad and single-gang
trim plate in the far left position
of the 3-gang junction box.
(See details on page 3)

3. Leave off the right side
flange and trim piece.

4. Install the iPod dock in the
left side of the 3-gang j-box.
It will overlap and snap into
the single gang trim plate.
(See page 5 for details)

3

4

See attachment
detail on previous page

Completed Installation

7

Docking the iPod

The dock platform can slide up to hide
the dock connector when the system is
not in use. Make sure the dock platform
is in the down position so the dock
connector is exposed (as shown here).

The sliding dock lever beneath the dock adjusts the position of the
dock connector to create a perfect fit for all compatible iPods (see
page 3 for a list of compatible iPods).

8 9

Using the A0505 Remote Control

The buttons above the iBus
label on the A0505 remote
control will mimic the
functions on the iPod wheel.

CH AN NEL V ISI ON

CAMERA

POWER

1

S
O

2
U
R
C

3
E

4

1

2

4

3

MUTE

VOL

MODEL

A0505

ZONE

POWER

CATV

MOD

The volume, mute, power, and source buttons
on the A0505 are designed to control Channel
Vision’s whole-house audio systems such as
the A4603 and P-1044.

Please note that this remote will only function
when your iPod is docked in the AB-315 wall
dock. It must be pointed at an IR receiver that
is part of an amplified keypad that is wired
“downstream”.

We realize that custom integrators way wish to design advanced control systems. To
provide assistance we have published the hex codes for the IR commands (see below).
(IR codes can be downloaded at: www.channelvision.com)

Hex codes for IR commands:
iBus Play/Pause:
0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F
003F 001F 001F 001F 001F 003F 003F 003F 001F 0CA2
iBus Skip <<:
0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F
003F 001F 001F 003F 001F 001F 003F 003F 001F 0CA2
iBus Skip >>:
0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F
003F 003F 003F 001F 001F 003F 003F 0CC3

Stripping and Connecting CAT5 Wire

CAT5 cable should be stripped with a proper stripping tool, such as Channel
Vision’s J-110 tool.

1. Place the CAT5 between the blade and the first notch of the J-110 tool.

CAT5

Blade

2. Rotate the tool only once. Multiple

turns could damage the inner wires.

3. Inspect the inner wires for damage.
If any wires are cut start over at step 1.

Check for damage

TIA-568A RJ-45 Modular Plug

Side view:

Top view:

Rotate

1 turn only

Slight

pressure

Green/White - Left channel ground
Green - Left channel
Orange/White - Right channel ground

Blue - Signal
Blue/White - Status
Orange - Right channel

Brown/White - Ground
Brown - 24vDC

System Specifications: (typical @25º C)
Operating Voltage : 24±.5VDC
Cable requirements: CAT-5 or better
Max CAT5 length: 250ft
Speaker impedance: 6-8 ohm
IR repeating: 30-60kHz
IR sensor range (AB-124): 40’@40kHz 25’@56kHz
Operating Temperature: -10ºC to +50ºC

Specifications subject to change without notice.

10

Connection Tips and Troubleshooting

1) Be sure you have connected the CAT5 cable correctly. Follow the
TIA-568A standard at both ends. Incorrect wiring can cause distorted
sound or prevent the system from working at all!

2) Be sure you have connected the speakers in phase. Follow the label
on the product. Out of phase speakers can rob the system of its
bass. Especially when driving dual-voice-coil speakers.

3) Trouble with IR control?

a. Make sure you are using the correct remote control. The AB-315 will

only respond to IR signals from the Apple Remote produced by Apple
Computer or the A0505 produced by Channel Vision. Other 3rd party
remote controls are not supported.

b. Check the batteries in the remote control and change them if

necessary.

4) The AB-315 is designed to charge the iPod (see compatibility notes
on page3). When the iPod is not playing music, the screen should
indicate that the iPod is being charged. If this does not occur, make
sure the power is reaching the volume control keypad (press the
volume buttons to see if the LED indicators light up).

5) Observe wiring distance specifications. The maximum
recommended wire length between the wall dock and CAT5 audio
hub is 250 feet. Although the AB-315 may work at greater distances,
extreme distances are not recommended because erratic
performance may result due to the power loss caused by the CAT5
wire.

6) If you are experiencing problems with your iPod that occur even
when it is not docked in the AB-315, then please contact Apple
customer service for support.

7) If you need additional help troubleshooting the AB-315 please
contact Channel Vision technical support or check our website for
more details: www.channelvision.com.

11

1

Channel Vision Technology will repair or replace any defect in material or workmanship
which occurs during normal use of this product with new or rebuilt parts, free of charge in
the USA, for two years from the date of original purchase. This is a no hassle warranty with
no mail in warranty card needed. This warranty does not cover damages in shipment,
failures caused by other products not supplied by Channel Vision Technology, or failures
due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended
only to the original purchaser, and a purchase receipt, invoice, or other proof of original
purchase date will be required before warranty repairs are provided.

Mail in service can be obtained during the warranty period by calling [phone]. A
Return Authorization number must be obtained in advance and can be marked on the
outside of the shipping carton.

This warranty gives you specific legal rights and you may have other rights (which vary
from state to state). If a problem with this product develops during or after the warranty
period, please contact Channel Vision Technology, your dealer or any factory-authorized
service center.

Channel Vision products are not intended for use in medical, lifesaving, life sustaining or
critical environment applications. Channel Vision customers using or selling Channel
Vision products for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such improper use or sale.

Specifications: (typical @25º C)
Operating Voltage : 24VDC
Cable Requirements: CAT-5 or better
Recommended Max. Cable Length: 250ft.
Operating Temperature: -10ºC to +50ºC

Specifications subject to change without notice.

iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.

Tested To Comply
With FCC Standards

This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.

Model: AB-315

iPod Wall Dock for Distributed Audio

w ww .c ha nn el vi sio n. co m

234 Fischer Avenue, Costa Mesa, California 92626 USA

[phone] [phone] [phone] fax

email: [e-mail]

500-258 revB