Channel Vision A0505 User Manual

Page 1
CHA NN EL V I SI ON
MODEL
A0505
ZONE
CAMERA
CATV
MOD
VOL
POWER
1
3
MUTE
1
S O
2 U R C
3 E
4
2
4
A0505
REMOTE CONTROL
11
Page 2
The A0505 allows you to operate many of Channel Vision’s whole-house audio/video systems without needing to touch the keypad. Additionally, this remote provides shuttle controls for the A0315, A0314D, AB-315 and other compatible iBus products.
®
Features:
!
Easily controls your whole-house audio/video system
!
No programming necessary
!
Compatible with: P-1044, AB-114, AB-124, A4601, A4603, A4623, AB­313, AB-315, A0312, A0314, A0314D, A0315, A0316
iBus Shuttle Control Buttons
Compatible with iBus wall docking stations.
Not compatible with AB-311
System Power Button
Turns on/off all zones of the multi-zone audio system.
Source Selection Buttons
Mute
Mutes audio, but video will continue.
Zone Power
Turns off Audio and Video for the zone you are in.
P-6014 functions:
Camera
Next
Camera Cycle
1 Camera 1 2 Camera 2
CHA NN E L V I S ION
MODEL
A0505
ZONE
POWER
CAMERA
CATV
MOD
VOL
POWER
1
3
MUTE
1
S O
2 U R C
3 E
4
2
4
3 Camera 3 4 Camera 4
CATV
Selects the CATV input on the Affinity
MOD Selects the modulator input on the Affinity
2
Volume Up/Down
Adjusts the volume for the zone you are in.
Page 3
Using the A0505 remote control...
The A0505 is designed to allow you to control your A4601, A4603, or A4623 without having to touch the buttons on the A0127. Simply point the A0505 remote control at the IR sensor located at the bottom of the A0127 and press the desired button.
Zone Power - Turns on/off the zone you are in
Power - Master power for A4601, A4603, and A4623
(turns all zones on/off)
CHA NN EL VIS IO N
MODEL
A0505
ZONE
POWER
CATV
MOD
CAMERA
VOL
POWER
1
3
MUTE
1
S O
2 U R C
3 E
4
2
4
Source Buttons
Vid 1
Vid 2
Vid 3
Vid 4
Pwr
Vol
+
Vol
Mute
-
Mute - Mutes the audio
for the zone you are in
iPod
A0315
or
A0314D
or
AB-315
CHANN EL V ISI ON
POWER
MODEL
1
A0505
S O
2
U
VOL - Controls volume
for the zone you are in
R C
3
E
4
ZONE
POWER
1
2
CAMERA
4
3
CATV
MUTE
MOD
VOL
Using the A0505 remote with iBus...
Your iPod’s shuttle controls can be operated from the A0505 when it is docked in a compatible iBus wall station.
3
Page 4
Using the A0505 remote control... Multi-Source A-BUS
The A0505 is designed to allow you to control your P-1044 without having to touch the buttons on the AB-124 keypad. Simply point the A0505 remote control at the IR sensor located at the bottom of the AB-124 and press the desired button.
Zone Power - Turns on/off the zone output of the P-1044 that the AB-124 is connected to
Power - Turns on/off the AB-124 amplified keypad.
CHA NN E L V I SI ON
CHA NN EL VIS IO N
POWER
MODEL
A0505
ZONE
POWER
CATV
MOD
CAMERA
VOL
1
3
MUTE
1
S O
2 U R C
3 E
4
2
4
Source Buttons
Pressing buttons 1-4 will cause the corresponding LED indicator to light.
Pwr
Source
Mute - Mutes the
AB-124 keypad
CHANN EL V ISI ON
POWER
MODEL
1
VOL - Controls volume
for the AB-124
A0505
S O
2 U R C
3 E
4
ZONE
POWER
1
2
CAMERA
4
3
CATV
MUTE
MOD
VOL
4
Page 5
Using the A0505 remote control... P-0321 or P-0328
The A0505 is designed to control your Affinity (P-0321 or P-0328), enabling you to easily switch between two different RF signals. Just point the remote to an IR receiver connected to the coax-based IR system and the IR signal will travel back to the Affinity and change it to the desired input.
Input from
CATV
Pat. Pending
Power
IR Out
P-0321
CH AN NEL
TM
VI SI ON
PRO
CATV Input
Input from Modulator
Model P-0321
MOD Input
Output
IR Coax Adaptor
with IR receiver
Note: See TV connection details on the following page
Digital CATV Box
N
1
VISI O
POWER
EL
2
S
NN
O
HA
U
3
R
C
C
E
4
2
MODEL
A0505
4
1
3
CAMERA
MUTE
ZONE
POWER
VOL
CATV
MOD
TV set
MOD - Selects the modulator input on the Affinity CATV - Selects the CATV input on the Affinity
OUT/in
C
2
-W
AY SPLITTER/COMBINER
5MHz-1GHz All Port DC passing
HA
N
IN
NEL VI
/out
Part No. HS-2
SIO
N
TM
OUT
/in
5
Page 6
Using the A0505 remote control... P-6014 Camera Sequencer
The A0505 is designed to allow you to control the switching functions on your P-6014. The A0505 allows you to choose any of the 4 cameras or select the Auto Cycle mode.
P-6014
Max
Adjust
ime
T
CAT5 CAMERA SEQUENCER
Camera 1
Loop Out 1
V
Camera 2
Camera 1
ideo Present
Model
P-6014
Loop Out 2
Camera 3
Camera 2
Camera 4
Loop Out 3
Inputs
Camera 3
Loop Out 4
NNE
A
H
C
SIO N
VI
PRO
Camera 4
RS-232
L
M T
Monitor 1
ideo
V
Audio
IR Input
IR Output
Power
Monitor 2
Note: Camera connections are not shown in this diagram, but the P-6014 can
IR-2400
support up to 4 CAT5 cameras.
CAMERA
What these buttons do:
1
3
2
4
N O I
S I
V
EL
POWER
1
CHANN
2
S O
U
MODEL
R
3
A0505
C
E
4
2
1
4
CAMERA
3
ZONE
POWER
MUTE
CATV
VOL
MOD
Camera Next... Changes the Monitor output to the next camera in the sequence. If you’re viewing camera 1, pressing it once will show camera 2 and so on. Camera Cycle... Causes the Monitor output to sequence through the cameras. The time adjustment on the P-6014 determines how long each camera view is displayed before switching to the next one. 1, 2, 3, 4 Camera Views... Changes the Monitor output directly to the corresponding camera input.
6
Page 7
A0505 IR codes in HEX format...
Some high-end programmable remote controls allow installers to input and store IR codes in HEX format. These codes are listed below:
All Power: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 0CC3
iBus Play/Pause: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 003F 001F 0CA2
iBus Skip <<: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 003F 001F 001F 003F 003F 001F 0CA2
iBus Skip >>: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 001F 001F 003F 003F 0CC3
Mute: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 003F 003F 001F 001F 0CCA
Source 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 001F 001F 001F 001F 0CCA
Source 2: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 001F 001F 001F 0CA9
Source 3: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 003F 001F 001F 001F 001F 001F 0CAA
Source 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 003F 001F 001F 001F 001F 003F 001F 0CAA
Volume Down: 0000 006D 0000 000C 001F 001F 0040 001F 001F 0040 001F 001F 001F 001F 001F 001F 0040 001F 001F 001F 001F 001F 001F 001F 001F 0040 001F 0CAA
Volume Up: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 0CA6
Zone Power: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 001F 001F 0040 001F 001F 001F 001F 0040 001F 001F 001F 0CA9
Camera 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 001F 001F 003F 001F 0CA5
Camera 2: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 0CA5
Camera 3: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 003F 003F 0CC5
Camera 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 0CC5
Camera Next: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 0CA5
Camera Cycle: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 0CC5
CATV: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 0CC5
MOD: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 003F 001F 001F 003F 003F 001F 001F 001F 0CA5
7
Page 8
1
Channel Vision Technology will repair or replace any defect in material or
workmanship which occurs during normal use of this product with new or
rebuilt parts, free of charge in the USA, for one year from the date of
original purchase. This is a no hassle warranty with no mail in warranty
card needed. This warranty does not cover damages in shipment, failures
caused by other products not supplied by Channel Vision Technology, or
failures due to accident, misuse, abuse, or alteration of the equipment. This
warranty is extended only to the original purchaser, and a purchase receipt,
invoice, or other proof of original purchase date will be required before
warranty repairs are provided. Channel Vision products are not intended
for use in medical, lifesaving, life sustaining or critical environment
applications. Channel Vision customers using or selling Channel Vision
products for use in such applications do so at their own risk and agree to
fully indemnify Channel Vision for any damages resulting from such
improper use or sale.
Mail in service can be obtained during the warranty period by calling (714)
424-0288 toll free. A Return Authorization number must be obtained in
advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights
(which vary from state to state). If a problem with this product develops
during or after the warranty period, please contact Channel Vision
Technology, your dealer or any factory-authorized service center.
w ww .c ha n n el vi si on .c om
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: techsupport@channelvision.com
500-200 rev B
Loading...