Vol
Vol
+
-
Pwr
Mute
A0129
IR Keypad for A0350 & WA-350/WA-351
1
1
A0129 Keypad
A0129 ... Keypad controller for use with the A0350, WA-350/WA-351
Features:
• Controls Channel Vision’s A0350, WA-350, and WA-351
• Available in white
Volume +/- buttons.
Increases or decreases
the audio level in a zone.
Vol
+
Vol
Power button.
Turns off the audio and
video playing in a zone.
Pwr
-
Mute
Mute button.
Mutes the audio playing
in a zone (video will still
be present).
IR receiver.
Detects IR signals and repeats
through the IR system.
2
Wiring the A0129 keypad...
Keypads connect to the through the RJ45 jacks on
A0350, WA-350/WA-351
the back panel of these products. Connections to the A0129 may be
accomplished either by using the RJ45 jack or the screw terminals provided
on the back side of the keypad. When using the RJ45 jacks, simply wire both
ends of the cable according to the TIA568A standard. When using the screw
terminals on the A0129, make sure to wire the RJ45 plug connecting to the
as shown below.
Front
Pwr
Vol
Vol
Mute
+
-
A0129
Rear
Pin 8: +VDC
Pin 7: Ground
Pin 4: IR signal
A0350/WA-35x
Pin 4: IR signal
Pin 7: Ground
Pin 8: +VDC
Pin 4: IR signal
N.C.
Pin 7: Ground
Pin 8: +VDC
3
Using the A050 remote control..
5 designed to control your A0350, WA-35x.
(Download IR codes at: www.channelvision.com and www.remotecentral.com)
Zone Power - Turns on/off the zone you are in
Power - Master power
C
MODEL
A0505
ZONE
POWER
TV
CA
MOD
H
N
A
CAMERA
NE L
ON
SI
I
V
POWER
S
O
U
R
C
E
1
3
MUTE
VOL
(turns all zones on/off)
1
2
3
4
2
4
Mute - Mutes the audio
for the zone you are in
VOL - Controls volume
for the zone you are in
A0129
A0129
Pwr
Vol
Vol
Mute
+
-
TM
N
IO
IS
L V
E
POWER
N
1
HAN
C
2
S
O
U
R
3
MODEL
A0501
C
E
4
ZONE
MUTE
POWER
VOL
Vol
+
Power button will
turn off/on zone
When the system
Pwr
Vol
Mute
-
is powered back on
each zone will return
to its previous volume
level and source
selection.
4
Connection to A0350, WA-35x Amplifier
WA-350/WA-351
CAT5 Audio Input... Connect the output of your CAT5
audio hub here
Keypad Input... Connect the A0129 here
A0350
CAT5 Audio Input... Connect the output of your CAT5 audio hub
here
Keypad Input... Connect the A0129 here
5
Using the A0350 and A0129 in a Stand-alone System
The A0350 can be flush-mounted in a room to power in-wall speakers. By
connecting the audio outputs from an audio source to the RCA inputs of the
A0350, the audio signal will be amplified to the in-wall speakers. Most audio
sources only offer a fixed audio output, A0350 volume level can be adjusted by
using an A0129 keypad or by connecting an IR-2400 and using a compatible
remote such as model A0505. The RCA audio outputs on the back of the
A0350 can be connected to a powered subwoofer to add more bass to your
audio system.
Left
A0129
Right
A0350
A ria
TM
By C HAN NE L VIS IO N
Local In
Flush Mount Amplifier
24VDCIR In
Vol
+
Vol
-
Pwr
Mute
Active
Spkrs
CD player
The keypad volume control will determine
the volume of the in-wall speakers as well
as the powered subwoofer.
Powered
Subwoofer
6
Accessories & Complementary Products (sold separately)
A0127 ... IR repeating keypad.
The A0127 contains the IR
codes to operate the volume controls in the Amplified
Vid 1
Vol
Vid 2
+
Vid 3
Vol
-
Vid 4
Pwr
Mute
Wireless Audio Receiver. You may also use a standard IR
receiver or a 3rd party keypad. When using a simple IR
receiver, you will need to use the A0505 remote control
which contains the IR codes to control the WA-350, WA-351,
and A0350. IR codes can be downloaded from
www.channelvision.com, or learned from an A0505 remote
control.
TM
C
HAN
NE
L V
ISION
POWER
MODEL
A0501
1
S
O
2
U
R
C
3
E
4
ZONE
POWER
MUTE
VOL
A0501, A0502, or A0505 ... Remote control. Contains IR
codes for controlling the Amplified Wireless Audio Receiver
as well as many other Channel Vision audio products.
IR-2400 ... Plasma-Proof IR receiver.
In-wall, In-ceiling Speakers, and Free Standing
Speakers... Channel Vision offers a full line of premium
speakers. These speakers are perfect for whole-house music
or home theater applications.
IR-4180 ... IR link cable. Can be used to transmit IR
7
Stripping and Connecting CAT5 Wire
CAT5 cable should be stripped with a proper stripping tool, such as Channel
Vision’s J-110 tool.
1. Place the CAT5 between the blade and the first notch of the J-110 tool.
CAT5
Blade
2. Rotate the tool only once. Multiple
turns could damage the inner wires.
3. Inspect the inner wires for damage.
If any wires are cut start over at step 1.
Check for damage
TIA-568A RJ-45 Modular Plug
Side view:
Rotate
1 turn only
Slight
pressure
Top view:
Green/White - Left channel ground
Green - Left channel
Orange/White - Right channel ground
Blue - Signal
Blue/White - Status
Orange - Right channel
Brown/White - Ground
Brown - 24vDC
1
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(714) 424-6500. A Return Authorization number must be obtained
in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
500-300 revA
Loading...