6404
Color Hi-res WDR Mini Camera
6204-xxx
Single Gang Color Hi-res WDR Mini Camera
1
0
The 6404 is a high-resolution mini pinhole camera. Its
extremely small size and cone-shaped lens make it ideal for
hidden and inconspicuous CCTV installations. Typical
applications include door stations, small flush-mount camera
assemblies, and hidden camera installations.
Features:
High quality 1/3” SONY Super HAD CCD sensor II
h
560 TV lines of resolution
h
5.5mm lens for tight viewing angles
h
WDR
h
6404 Mini Pinhole Camera Includes
Camera
Small Screws
Mount
Dimensions
18.1
14
Camera Cable
Power Supply
31
30
30
Yellow (Video)
Black (GND)
Red (12VDC)
2
2
Model 6404/6204-xxx
6404
Power
Video
(BNC Connector)
2-Conductor power
supply extension
(not included)
Crimp-on splice
connectors
(not included)
Coax extension
(not included)
Installation:
Attach the camera mount to a flat surface using the mounting hole
h
shown above.
Drill a hole in the wall, ceiling, or use the hole in the 6204-xxx
h
bracket for wiring (see diagram).
If necessary, attach the camera’s video output to a coax extension
h
that is long enough to reach your monitor or video distribution
equipment.
To Monitor
or
Video distribution
Power supply
(included)
If necessary, cut the connector off of the end of the power supply and
h
splice in an extension using crimp-on connectors.
6404 is also used in the 6204-xxx single gang color camera assembly.
6404
6204-xxx assembly
3
*Specifications:
Image Sensor: 1/3” SONY Super HAD CCD
Scanning Frequency: NTSC 15.734KHz (H) 59.94Hz(V)
Resolution: 560 TV Lines
Total Pixels: NTSC 811 (H) x 508 (V)
Effective Pixels: NTSC 768 (H) x 494 (V)
S/N: More than 52dB
Min. Illumination: 0.1 Lux@F2.0 (0.0002 Lux)
Sync System: Internal
Gamma: Y=0.45
Video Output: 1,0 Vpp Composite (75 Ohms)
Lens: 5.5mm P4
Electronic Shutter: NTSC: 1/60 - 1/120,000 sec
WDR: Yes
AGC Off, On (Low, Middle, High)
Day & Night: Auto, Color, BW selectable
Motion Detection: Off, On (Area select)
Privacy Masking: Off, On (192 zone selection)
Languages: English, Chinese
OSD: Yes
White Balance: AWB, ATW, AWC-Push, manual
3D-DNR 0-6 Setting
Digital Zoom: x1 - x10
Digital Effect Off, V-Flip, Mirror
Operating Temperature: 14° - 122° F
Humidity: Less than 80%
Power Consumption: 12vDC Max 100mA
Dimensions: 0.98" x 0.98”
Weight: Approximately 72g
*Specifications subject to change without notice
1
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during
normal use of this product with new or rebuilt parts, free of charge in the USA, for one year from the date of
original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not
cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or
failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the
original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required
before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return
Authorization number must be obtained in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If
a problem with this product develops during or after the warranty period, please contact Channel Vision
Technology, your dealer or any factory-authorized service center.
Channel Vision products are not intended for use in medical, lifesaving, life sustaining or critical environment
applications. Channel Vision customers using or selling Channel Vision products for use in such applications
do so at their own risk and agree to fully indemnify Channel Vision for any damages resulting from such
improper use or sale.
w ww .c ha nn el vi si on .c om
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: techsupport@channelvision.com
500-266 rev C
Loading...