Channel Vision 6010 User Manual

Specifications
*:
Image Sensor:
Picture Elements:
Resolution:
S/N Ratio:
Min Illumination:
Electronic Shutter:
Iris Control:
White Balance:
Gamma Characteristic:
Lens:
Sync. System:
Power Requirements:
Power Consumption:
Video Output:
Humidity:
Dimensions:
Operating Temp:
Sony 1/3” Super HAD CCD
NTSC: 510x492
420 lines
More than 46 dB
0.1 LUX
1/60s - 1/100,000s
Automatic
Automatic
0.45
Varifocal, 4-9mm
Internal
12VDC
120mA
1 Vp-p @ 75 ohms
RH 95% max.
2.75” x 3.30” x 7.50” (70mm x 84mm x 190mm)
-10°C to 50°C (14°F to 122°F)
*Specifications subject to change without notice.
CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs
during normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from
the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This
warranty does not cover damages in shipment, failures caused by other products not supplied by Channel
VisionTechnology,orfailures due to accident, misuse, abuse, or alteration of theequipment.This warranty
is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original
Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return
Authorization number must be obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives youspecificlegalrights and you may have other rights (whichvaryfromstate to state).
If a problem with this product develops during or after the warranty period, please contact Channel Vision
Technology, your dealerorany factory-authorized service center.
500-000 Rev B
6010
Varifocal Bullet Camera
8
The is a Varifocal Bullet Camera. Its 4-9mm varifocal
6010
6010
lens and low light sensitivity make it ideal for CCTV installations with minimal ambient light where precise camera adjustments are needed. Typical applications include entry gates, driveways, patios, and backyards.
Features:
Sony 1/3” Super HAD CCD sensor
h
420 TV lines of resolution
h
4-9mm varifocal lens
h
Works with 5040 illuminator for night viewing
h
Easy to install
h
6010 Varifocal Bullet Camera Includes
Model
Base
BNC connector
Coax extension
(not included)
Installation:
Drill a hole for wiring to exit the wall or ceiling.
h
1. Mount base
2. Connect camera and swivel mount
3. Connect wiring
4. Point camera and adjust the lens
To Monitor
Video distribution
2-Conductor power
supply extension
(not included)
Crimp-on splice
connectors
(not included)
or
Power supply
(included)
2
Camera
Swivel Mount
Screws
Power Supply
Anchors
Attach the base of the swivel mount using the screws
h
provided.
If necessary, attach the camera’s video output to a coax
h
extension that is long enough to reach your monitor or video distribution equipment.
If necessary, cut the connector off of the end of the power
h
supply and splice in an extension using crimp-on connectors.
Mount the base to the ceiling.
h
Screw the swivel mount into the base (see diagram).
h
Point the camera body and adjust the lens view.
h
3
Loading...