Changzhou Shobroad Electronics 49SVL19 Users manual

49SVL19
USER’S MANUAL
49” 4K ULTRA HD TELEVISION
For technical assistance or troubleshooting please call
1-866-594-5445 or visit www.bolvadigital.com
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ-
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
paratus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
-
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or
Moisture.
shall be placed on the apparatus.
17. The mains plug or appliance coupler shall remain readily operable.
18. Use in outdoors: This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may
become damaged.
Safety:
TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED SERVICE TECHNICIAN ONLY.
intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s
to constitute a risk of electric shock to the users.
Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
1
Safety Instructions
Please read these instructions carefully.
This product complies with all applicable US federal safety requirements, as well as those of the Canadian Standards Association.
1. Cleaning
Always unplug the TV before cleaning. Do not use liquid or aerosol cleaners. Use a soft, slightly damp cloth to clean.
2. Water and Moisture
Do not use this TV near water. Avoid using this TV in an excessively damp environment.
3. Stand
This TV should always be placed on a solid, sturdy surface.
4. Ventilation
To prevent overheating, do not block or obstruct the vent openings on the TV’s back panel. Also, avoid placing this TV in a confined area with poor air flow.
5. Power Sources
This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of The type of power supply to your home, consult your electronics retailer or local power company.
6. Power Cord Polarization
This TV is equipped with a three-wire grounding type plug, a plug with a third (grounding) pin. As a safety feature, this plug will only to replace the obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
7. Power Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the TV.
8. Lightning
To protect the TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV from lightning and power-line surges.
t into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician
2
Safety Instructions
9. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electri­cal Code (U.S. A.), ANSI / NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten­na-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Example of Grounding According to National Electrical Code Instructions
Ground Clamp
Electric Service
Equipment
NEC - National Electrical Code
10. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall on to power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
11. Overloading
12. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out
Antenna Lead in Wire
Antenna Discharge Unit (NEC Section 810-20)
Grounding Conductor (NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System (NEC Art 250, Part H)
TV.
13. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or
14. Damage Requiring Service
a. If the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will
e. If the TV has been dropped or the cabinet has been damaged. f. If the TV exhibits a distinct change in performance.
3
Safety Instructions
15. Replacement Parts
When replacement parts are required, be sure that only an authorized service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards and void any warranty.
16. Safety Check
Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine whether the product is in proper operating condition.
17. Wall Mounting
The TV should be mounted to a wall only by a professional. The TV may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Warranty shall be voided.
18. Heat
The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
NOTE TO CABLE / TV INSTALLER:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (USA). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of the cable entry as practical.
FCC REGULATORY INFORMATION:
This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen­tial installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this television does cause interference to other electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and television.
- Connect the equipment into an outlet on a circuit different from that to which the television is connected.
- Consult your dealer or an experienced radio / TV technician for assistance.
4
Table of Contents
Important Safety Instructions .........................................................................................................................................1
Table of Contents ..........................................................................................................................................................5
Introduction ....................................................................................................................................................................6
Installing the Base .........................................................................................................................................................7
Remote Control
Battery Install .................................................................................................................................................................8
Overview .......................................................................................................................................................................9
TV Overview
Front Panel .................................................................................................................................................................10
Rear Panel .....................................................................
Connecting External Devices Customizing TV Settings
...........................................................................................................................................................29
Troubleshooting .......................................................................................................................................................30
...............................................................................................................................
.......................................................................................................................................
............................................................................................11
12 13
5
Introduction
you up and running with the best possible connection type for your devices. Enjoy!
What’s In The Box
teg lliw koob noitcurtsni sihT .snoitcnuf dna serutaef tuoba snoitseuq evah uoy revenehw ediug siht ot refer esaelP
The package includes the following items. Save the carton & packing for future shipping
• Remote Control
• AAA Batteries (2)
• Quick Start Guide
• User Manual
• Child Safety
• Pedestal Base
• Screws for Pedestal Base (4)
• Remote Control
• AAA
Batteries x 2
• User manual
• Quick Start Guide
• Child Safety
• Base Legs
• Screws for Base Legs
Wall Mount Information
This TV uses a 400x200 VESA mounting bracket attachment pattern. Please take this information with you when purchasing a wall mount for this TV.
6
Installing the Base
Place the TV face down on a soft cloth or cushion.
Position base as shown.
1
Insert 4 screws (provided) through the holes in the bottom of the base into the post holes and tighten securely. Do not over-tighten.
7
Remote Control
Battery Install
Your remote control handset is powered by two (2) AAA type batteries
• Turn the remote over and remove battery cover.
Effective remote range is approximately 16 feet at an
angle of no greater than 30° to the left / right or 20° up / down to the IR sensor.
• Place two (2) “AAA” batteries into the battery compartment with the “+” and “-“ ends facing as indicated.
To avoid possible damage from battery chemical
leakage, remove the batteries if you do not plan to use the remote for an extended period of time. Do not mix batteries of different age and / or type. Always discard used batteries safely.
Do not expose the remote control to liquids, direct sun-
light or sources of excessive heat.
The IR receiver on the TV will not work properly if the set
is in direct sunlight.
NOTE: Improper use of batteries can result in a chemical leakage or explosion.
• Replace the cover
30 30
IR Receiver
8
Remote Control
TV
Overview
1. :Switch the TV between On and Standby mode.
2.
3. 0~9:Select a program.(ATV/DTV mode)
4.
such as 2-1.
5.
channel.
6. APP:Press to select the desired APP.
7. MENU:Display the main menu.
8. SOURCE:Select among the different input
signal sources:TV/AV/COMPONENT/HDMI1/ HDMI2/HDMI3/VGA/USB.
9.
screen display menus and adjust the system settings to your preference.
10. OK:
11. RETURN:Return to previous menu.
12. EXIT:Exit the on screen display menu.
13. ASPECT:Select the aspect ratio.
settings:standard/wide/wide zoom/zoom/Just Scan (HDMI)/Dot by Dot(VGA).
14. VOL+/-:Adjust the volume.
15. CH
16. TV:Into the TV channel.
17.
18.
19.
20.
chapter/track/photo.
21.
track/photo.
22. FREEZE:Freeze the picture.
23.
24. ADD/ERASE:Add or delete Favorite channels.
25. FAV:Display the favorite channel list.
26. INFO:Display the present screen information
such as the current channel and input source.
27. MTS:Switch among different audio channels:STEREO/MONO/SAP.
28. CC:Closed Caption selection:ON/OFF/CC On Mute.
29. V-CHIP:Set up parental control.
30. P.MODE:Select picture mode:dynamic/movie/
user/standard.
31. S.MODE:Select sound mode:standard/music/ movie/user.
32. CH.LIST:Display program list.
:Mute and restore TV sound.
:Enter multiple program channel number
:Return to the previous viewing
:Allows you to navigate the on
the selection.
:Select the channel.
:Start playback or pause. :Reverse playback rapidly. :Advance playback rapidly.
:Skip to the beginning of the previous
:Skip to the beginning of the next chapter/
:Stop the playback.
9
TV Overview
IR Receiver
A
soft light illuminates when the
television power is on.
SOURCE
Front & Rear Panel
TV
AV
COMPONENT
HDMI 1
HDMI 2
HDMI 3
VGA
USB
1. POWER - Press the POWER button to turn the TV ON/ OFF (power). The screen image will appear within a few seconds, and the LED will turn on.
Volume (+VOL-) - Press the VOL+ / VOL- buttons to adjust the volume up or down.
2.
3.
4. MENU - Press the MENU button to display. Press VOL+ to select from the 6 menu options available. Press the CH+ / CH- buttons to select a feature from the selected menu then press the VOL+/VOL- buttons to adjust the volume settings.
5. INPUT - After connecting your DVD, cable box, etc. select the appropriate input source to view. Press the INPUT button to display the input options. Press the CH+ / CH- buttons to highlight the input source and press the VOL+ button to select.
)+ HC -( lennahC eht sserP - CH-+ HC /
buttons to select a channel in the TV mode.
0 1
TV Overview
Rear Panel
OPT ICAL VGA
1. OPTICAL OUT -
RJ4 5
HDM I2HDM I1
Connect to an AV Receiver for high quality digital audio.
2. USB Input Port
supports MP3 and JPEG).
Wall Mounting
It is recommended that you consult a professional before mounting this TV a wall.
Use VESA 400x200 wall mount hardware.
PC
AUDI O
HDM I3
NOTE: You must remove the pedestal before wall mounting.
CVB S/Y
R USB 2L
PB PRUSB 1 TV
3. RJ45 - RJ45 plug for connecting to external modem or network access equipment.
4. HDMI1/2/3 IN - To connect to a High Definition (HD) signal output device, such as a set top box, blu ray
disc player or AV receiver.
5. VGA - For PC display.
6. PC AUDIO - Connect it to the audio output terminal of PC.
7. CABLE-ANTENNA
- Connect an antenna or cable connection for television reception.
Note: Use an outdoor antenna, cable or satellite for best reception.
8. EARPHONE - Connect a stereo headphone for private listening.
9. AV - Connect an external device to the composite VIDEO (V) and AUDIO (L/R) out jacks found on most
equipment.
10. Component Y Pb Pr Input - Connect to an AV device that features component (Y Pb Pr) video and audio output jacks.
1 1
Connecting External Devices
2 1
Customizing TV Settings
Turning On/Off Your TV
• Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate.
• In Standby Mode, press the turn the TV on. The red LED indicator will turn blue.
The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket.
Initial Setup
Welcome to the Element TV Setup Wizard.
Follow this guide to help setup your TV to scan channels or access your external devices like your Antenna,Set-Top Box, Blu-ray,DVD,Gaming systems or other devices.
button on the main unit or on the remote control to
• The time you turn the TV on, it will go into the Setup Wizard. Press the Arrow buttons to highlight and select your desired mode and press OK to
Use the UP and DOWN arrows on your remote control or TV keypad to select the language of the on screen menu.
Use the UP and DOWN arrows on your remote control or TV keypad to select your local time zone.
person to):
3 1
Customizing TV Settings
Initial Setup
Welcome to the TV Setup
CONNECT TO THE INTERNET
SKIP
CONNECTION DEVICES
CONNECT A BLU-RAY, DVD, OR OTHER DEVICES
SCAN CHANNELS FROM THE ANTENNA OR COAXIAL CABLE INPUT
ARE YOU SURE
SETUP NETWORK
SKIP
Connecting your TV to the Internet will let you use great services like Netflix,stream TV shows and movies,etc.
3 4
SCANNING CHANNELS
Use the UP and DOWN arrows on your remote control or TV keypad to select the network scan type.
5
6
SCANNING CHANNELS
SCANNING CHANNELS
Auto scanning program stops manually.
7
8
• If channels cannot be found, this frame
will be displayed automatically.
4 1
Customizing TV Settings
Source
• Press SOURCE on the remote control or on
SOURCE
TV
AV
COMPONENT
HDMI 1
HDMI 2
HDMI 3
VGA
the main unit to display the source menu, then use the Arrow buttons to cycle among the different input sources: TV/AV/COMPONENT/ HDMI/VGA/USB, then use the Arrow buttons to highlight the desired source and press OK to
USB
Channel Selection
• Press the CH /CH buttons on the main unit or on the remote control repeatedly to select the channel.
• Press the 0-9 buttons on the remote control to select the channel directly.
Press "4", and then press OK button to select channel 4. Press "4" and "5", and then press OK button to select channel 45. Press "1", "2" and "3", and then press OK button to select channel 123.
Volume Adjustment
• Press the VOL+/- buttons on the main unit or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the MUTE button again or the VOL+ button to resume the sound.
1 5
Customizing TV Settings
Streaming
• Press MENU button on the main unit or on the remote to display the main interface. Then use the Arrow buttons to select STREAMING and press OK to enter. Use the Arrow buttons to select the desired APP and press OK button to view. Or press the hotkey on the remote control to enter the desired APP directly.
NETFLIX
YouTube YouTube your way on the best screen in your house.
VUDU
Pandora
Facebook
Twitter
Enjoys TV shows & movies streamed instantly over the Internet.
Discover, watch and collect the latest movies and TV shows in high quality 1080p. Free to sign up. No subscriptions, late fees or commitments.
Free personalized radio that offers effortless and endless music enjoyment and discovery. Just start with the name of one of your favorite artists, songs, genres or composers and Pandora will do the rest. It’s easy to create personalized stations that play only music you’ll love.
Facebook is an American online social media and social networking service company based in Menlo Park, California.
Twitter is an online news and social networking service on which users post and interact with messages known as "tweets".
Netrange
ZEAS
FOXXUM
TOON GOGGLES
As one of the pioneers of Smart TV, NetRange is the leading global provider of white labeled, turnkey Smart TV and OTT ecosystems.
Provide tmassive on-demand films, one-touch access wonderful films
Foxxum provides Smart TV Solutions in close collaboration with leading brands at all stages of the global consumer electronics value chain from Silicon Vendors, though Device Manufacturers, Operators to Content Partners in order to add value to their products.
Toon Goggles is an American on-demand entertainment service for children that offers animate shows, games and music worldwide via.
6 1
Customizing TV Settings
Media
• Press MENU button to display the main interface, then use the Arrow buttons to highlight MY MEDIA and press OK to
Select among Photos, Music and
Video to view what you like.
Note: Portable drives should be inserted before entering MY MEDIA menu.
Viewing Photos
RETURN
• Use to
buttons
Directories:10
the Arrow buttons
to highlight the PHOTOS option and press OK, then it will jump
the inserted drive, press OK to enter. After entering PHOTOS, use
to select the picture
and press OK to enter.
Files:0
Total:10
the Arrow
RETURN
Directories:10
Files:0
Total:10
• After entering the picture file, use then press the displayed. Use
to display. When the picture is playing, the picture Function Bar will be
the Arrow buttons
the Arrow buttons
to select the desired picture,
to select the desired function available on the bar.
1 7
Customizing TV Settings
Listening To Music
RETURN
• Use
the Arrow buttons
Directories:10
to highlight the MUSIC option and press OK, then it will jump
Files:0
Total:10
to confirm the inserted drive, press OK to enter. After entering MUSIC, use
buttons
to select the audio
RETURN
Directories:10
TITLE:08.1 Hz L
ALBUM:ABEX Test CD YEAR: SAMPLE FREQUENCY:44100 BIT RATE: 128 TOTAL TIME:60
Files:0
• After entering the audio use the
the Arrow buttons
to display. When the music is playing, the music Function Bar will be displayed. Use
to select the desired function available on the bar.
and press OK to enter.
Total:10
the Arrow buttons
to select the desired music, then press
Watching Videos
RETURN
the Arrow
• Use
the Arrow buttons
to
buttons
RETURN
the inserted drive, press OK to enter. After entering VIDEOS, use
to select the video
Directories:10
Files:0
• After entering the video
to display. When the video is playing, the video function bar will be displayed. Use
the
Arrow buttons
to select the desired function available on the bar.
Directories:10
Files:0
Total:10
to highlight the VIDEOS option and press OK, then it will jump
the Arrow
and press OK to enter.
Total:10
use
the Arrow buttons
1 8
to select the desire video, then press
the
Customizing TV Settings
TV Settings
• Press the MENU button on the main unit or on the remote control to display the main interface. Then use the Arrow buttons to highlight TV Settings and press OK to enter. Then use the Arrow buttons to cycle among the following options and select the desired one to enter.
1 9
Customizing TV Settings
General
• Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to to c ycle among different options and s elect General to enter and adjust each option setting.
Use the Arrow buttons
WIDE
Software Update(USB)
View End-User License
Software Update(Network)
Software Information
MENU LANGUAGE
TRANSPARENCY
ZOOM MODE
VGA SETTINGS
CLOSED CAPTION
Select the menu language among English, Français or Español. The default on-screen menu language is English.
Select to turn On/Off transparency function.
Select zoom mode: Wide/Wide Zoom/Zoom/Standard/ Just Scan(at HDMI mode)/Dot by Dot(at VGA mode). Note: With a different input source, the zoom mode options may differ.
Adjust advanced option’s setting: H-POS, V-POS, Clock, Phase or Auto. (only available in VGA mode)
CC mode On/Off/CC on Mute.
Basic Selection
Advanced Selection
Option
CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4,OFF.
Service1/Service2.../ Service6/OFF.
Mode, Font Style, Font Size, Font Edge Style, Font Edge Color, FG_ Color, BG_ Color, FG_ Opacity, BG_Opacity.
20
Customizing TV Settings
Mode1
HDMI EDID
INLINK
Accessibility
OFF
DLC
OTHER SETTINGS
RESTORE DEFAULT
SOFTWARE UPDATE (USB)
VIEW END-USER LICENSE
SOFTWARE UPDATE (NETWORK)
HDMI: Mode1/Mode2. INLINK: LINLINK CONTROL,DEVICE POWER OFF,TV Auto Power On,AUDIO RECEIVER,LINLINK DEVICE LIST,ROOT MENU. Accessibility TTS:Voice Guide,VERBOSITY,RATE SUPPORT,PITCH SUPPORT,VOICE,Video Description DLC: Select to turn On/Off DLC.
Restore the TV to factory default settings.
Software Update In the case of a USB device.
Choose "I have read the user agreement" to select Accept or Decline .
Software Update In the case of a NETWORK device.
SOFTWARE INFORMATION
Check Module Software Version NetReady Device ID.
How to turn the Text-to-Speech (TTS) voice guide on or off?
• Press “MENU” key on the remote control
• Turn the GENERAL menu.
• Select “OTHER SETTING”
• Select “Accessibility”
• Select “Voice Guide” and turn it on or off.
21
Customizing TV Settings
Picture Settings
• Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to to cycle among different options and select Picture to enter and adjust each option setting.
Cycle among picture modes: Dynamic/Standard/Movie/User.
PICTURE MODE
BRIGHTNESS
CONTRAST
Alternative: Press P.MODE button on remote control to set the picture mode directly.
Increase or decrease the amount of white in the picture.
Adjust the difference between light and dark levels in the pictures.
Use the Arrow buttons
AUTO
OPEN HDR
COLOR Control the color intensity.
Adjust crispness level in edges
SHARPNESS
TINT
COLOR TEMPERATURE
ADVANCED OPTION
OPEN HDR
between light and dark areas of the picture.
Adjust the balance between red and green levels.
Cycle among color temperatures: Normal/Warm/COOL.
Set the following options: Noise Reduction: Reduce the noise level of the connected device: OFF/ WEAK/MEDIUM/STRONG. White Balance: To set the different options of white balance. R-GAIN/G-GAIN/B-GAIN/R-OFFSET/ G-OFFSET/B-OFFSET. Backlight: To set the value of backlight.
Cycle among picture modes: OFF/AUTO/LOW/MIDDLE/HIGH .
22
Customizing TV Settings
Audio Settings
• Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to to cycle among different options and select Audio to enter and adjust each option setting.
Allow the selection of an audio­enhancement technique: Standard/ Music/Movie/User.
Control the relative intensity of lower­pitched sounds.
Control the relative intensity of higher­pitched sounds.
Adjust the relative volume of the speaker in a multiple speaker system.
Turn On/Off to automatically control volume levels.
Select the digital audio output mode between PCM/RAW.
Turn On/Off to provide an enhanced listening experience.
OFF
AUTO VOLUME
SOUND MODE
BASS
TREBLE
BALANCE
AUTO VOLUME
DIGITAL AUDIO OUTPUT
SURROUND SOUND
Use the Arrow buttons
Network Settings
NOT CONNECT
AUDIO LANGUAGE
Select audio language among: English, French, Spanish.
• Press MENU to display the main interface, use the Arrow buttons to highlight TV SETTINGS and press OK to
Then Use the Arrow buttons to select NETWORK to enter and adjust each option setting.
Select Wired and Wireless network,
NETWORK TYPE
MY NETWORK
then connect the TV to the wired network or search the wireless network through searching available
Display the current network which you connect to.
IP ADDRESS
23
Display the current IP information.
Customizing TV Settings
Channel Settings
• Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings. Use the Arrow buttons to cycle among different options and select Channel to enter and adjust each option setting.
AIR/CABLE
AUTO SCAN
FAVORITE
SHOW/HIDE Show/Hide the selected channel.
CHANNEL NUMBER
CHANNEL LABEL
SIGNAL INFORMATION
Select antenna between Air and Cable.
Select the Auto Scan feature to scan your available Air and cable channels.
Set the selected channel as a favorite channel.
Display the current channel number.
Display the current channel label.
Display the information of current signal.
24
Customizing TV Settings
Time Settings
• Press MENU to display the main interface, then
use the Arrow buttons to highlight TV Settings and press OK to to cycle among different options and select Time
30S
NEWFOUNDLAND
to enter and adjust each option setting.
Select a period of time after which the TV automatically switches to standby mode:
SLEEP TIMER
OSD TIMER
TIME ZONE
Off/5/10/…/180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly.
Set the OSD timer: Off/15s/30s/60s/120s/240s.
Select a Time Zone: PACIFIC/ALASKA/HAWAII/ NEWFOUNDLAND/ATLANTIC/ EASTERN/CENTRAL/MOUNTAIN.
Use the Arrow buttons
DAYLIGHT SAVING TIME
Select to turn daylight saving time On/Off.
25
Customizing TV Settings
Lock Settings
• Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings. Use the Arrow buttons to cycle among different options and select Lock to enter and adjust each option setting.
Note: the default password is “0000”.
Use 0-9 buttons to input the old
CHANGE PASSWORD
SYSTEM LOCK
USA
CANADA
RRT SETTING Set Rating Region Table.
RESET RRT Select to reset the RRT setting.
password and then input the new 4-digit password. Re-enter new password for
Select to turn On/Off system lock. The following options (USA, Canada, RRT Setting and Reset RRT) will only be accessible when you turn the system lock on.
TV
MPAA
Canada English
Canada French
TV RATING: Press OK button to lock or unlock TV rating.
Select MPAA rating : N/A,G, PG, PG-13, R, NC-17,or X.
Select MPAA rating for English-speaking Canada : E, C, C8+, G, PG, 14+, 18+.
Select MPAA rating for Quebec Canada : E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+.
CLEAR LOCK Clear all lock settings.
26
Customizing TV Settings
APP Settings
• Press MENU to display the main interface, then use Arrows to highlight TV Settings. Use Arrows to cycle among different options and select App Settings to enter and adjust each option setting.
Terminate Netflix
Exception while opening/reading file.
4.1.1.1.20190326153240
NETFLIX VERSION
DEACTIVATE APP
DEACTIVATE APP
Terminate Netflix
ESN Electronic Serial Number. NETFLIX VERSION
Deactivate information.
Deactivate Vudu and clear the account information.
Quit Netflix
Show
and clear the account
Version
27
Customizing TV Settings
Motion Picture Association of America (MPAA) Rating System
Grade Meaning
G General Audiences Content not offensive to most viewers.
PG
PG-13
R Restricted
NC-17
X Hard Core Films Same as NC-17 rating. No Rating No Rating MPAA Not Rated
Parental Guidance Suggested
Parents Strongly Cautioned
No children under age 17
Content is such that parents may not want their children to view the program.
Program is inappropriate for pre-teens, with a greater degree of offensive material suggested than a PG rated program.
Not for children under 17, strong element of sex and/or violence.
Not for children under 17 under any circumstances. Strong sexual content.
TV Parental Guideline Rating System
Grade Meaning
TV-Y All Children Content not offensive to most viewers.
TV-Y7
TV-G General Audience
TV-PG
TV-14
TV-MA
Canadian Rating:
• Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+).
• Canadian French is used in Quebec (G,8 ans+, 13 ans+,16 ans+, 18 ans+).
Directed to Older Children
Parental Guidance Suggested
Parents Strongly Cautioned
Mature Audience Only
Considered suitable for children over 7, may contain fantasy violence scenes.
Considered suitable for all audience; children may watch unattended.
Suggested unsuitable for younger children, may contain suggestive language, bad language, sex and violence scenes.
unsuitable for children under 14, may contain strong language, bad language, sex and violence scenes.
Adults only, may contain strong language, bad language, sex and violence scenes.
The V-Chip will automatically block certain categories that are "more restrictive".If you block TV-Y category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category, then allthe categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA).
28
UHD LED
49” Diagonal
16:9
480p/720p/1080i/1080p/2160p
3840x2160
200
5500:1
178°
178°
16.7M
135 W
2 x 8W
43.8” (W) x 25.7” (H) x 3.8” (D)
Weight (may vary 10%)
_
+
20.6 lbs
Composite Video
Y Pb Pr
HDMI
CABLE-ANTENNA
Optical
Earphone
USB
RJ45
VGA
PC AUDIO
3
2
29
Troubleshooting
Symptom Possible Solutions
Cannot receive certain channels through the antenna
No color • Check the video installation of your external A / V equipment.
Video noise or choppy picture • Readjust antenna. Keep TV away from noise sources, neon lights,
TV blocked on certain channels • Perform Channel Scan to add channels into the TV tuner memory.
Cannot use certain functions • If the item chosen in a menu is shown in gray text, that item cannot be
No sound • Check that connected audio cables are completely inserted.
• Perform Channel Scan to add channels into the TV tuner memory. See page 24.
• Readjust your antenna and retry Auto Channel Scan.
• Signal from the TV station may be weak in your area.
See pages 12.
and microwave appliances.
See page 14.
• Check whether the channel was deleted. See page 3.
• Check parental control settings. See page 26.
• Restore default settings. See page 20.
selected in the current input.
See page 23.
• Mute function may be enabled, press mute on the remote.
Black box on screen • The “Text” option is enabled and no text is available.
• Press the CCD button on the remote control to turn off.
No power • Batteries in the remote control may need replacing.
• Re-attach AC plug to wall outlet.
No picture • Digital TV channel signal maybe weak, try another channel.
• Press INPUT button to verify the desired input selected.
• Re-connect the antenna or cable wiring.
• Restore default settings. See page 20.
Remote control does not function • Replace batteries with new ones.
• Check that battery polarity is correct.
• Point remote directly at the TV’s IR receiver. See page 10.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled,environment .This equipment should be installed and operated with minimum distance 20cm betweenthe radiator& your body.
30
Loading...