Changsha SunSky Electronic Design and Development SUNVOTEW5X Users Manual

MANUAL

Thanks for purchasing our product. Please read this manual carefully
before starting to use this device. When you use this device, you are
supposed to learn well of this product.

1. Power On-off
Power on: Press any key of the keypad to turn on the power, when there
are an antenna symbol and signal in
LCD, it means connection between keypad and base station is successful.
Power off:

-If not under the vote mode, you don’t press any key of the keypad, after
20 seconds, the keypad will be turned
off automatically.

-Keypads also can be turned off together remotely by software.

2. Functions
Sign-in &
Presentation

Sign-in

Quickly response As above

Vote

Grade

LCD display

Press any numeric key,
the
LCD will display the
corresponding number.
When data is transmitted
successfully, it
displays
“OK” symbol.

As above

As above

Operation

Press “OK” key to sign-in

Press “Ok” key to quickly
response.

“1﹑2﹑3”stand for“ Yes﹑No﹑
Abstain” separately, then press
“OK” key to confirm.
1~9 stand for 9 grades, then press
“Ok” key to confirm.

Single/Multiple
choice

As above

Make the single / multiple choice
by pressing 1~9 keys,
－the numbers are displayed in LCD,

Score

As above

the buzzer will ring if the
keypresses are efficient,
otherwise no buzzer ring;the vote
numbers reach the set option
numbers, then cannot
choose more.if you want to change
the vote answers, press “c” to
cancel
them first, then make a new choice,
finally press “Ok” to confirm .
You can set the upper-lower limit
(integer) and digits after
floating dot, or not set. When
pressing numeric keys, the LCD
will display these corresponding
numbers, press “C” key to clear
the last number, finally press
“Ok” to confirm.

- If setting the upper-lower limit,
when the data is wrong,
LCD displays “Err”
automatically, then please input
again.

- If not setting the upper-lower
limit, you can input 10
numbers at most including “-” and
floating dot, and floating
dot stands the place of one number

3. Read and set keypad ID No.
Work with base station and software, press “OK” key to read and set
keypad ID No.When not vote, press “C” key to display the keypad ID No.

FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any interference received,
including interference that may cause undesired operation