Changsha SunSky Electronic Design and Development SUNVOTEKEYS5X Users Manual

FAST OPERATION MANUL S50

S50 FAST OPERATION MANUL

LCD display

OK

Alphanumeric keys

Cancel

Shift

Menu

1. Power On-off

Power on: Press C key to turn on.
Power off: Press C key for 3 seconds; auto power off or power off remotely by software.

2. Functions

When the base stations start different polling types, there will be text-operation and status indications on the
LCD display.

Polling types Operation

l Sign-in Press ”OK” key to sign-in

l Registration Sign-in

l Judgment Press “√” ”X” or “？” to make judgment

l Single choice

l Multiple choice

Press digit, letter to input student ID or name.
The input mode can be shifted by pressing input shift key.

Support max. 10 options.
Make the single choice by pressing 0~9 (0 stands for 10/J)

-The digit or letter will be displayed on the LCD

-The result will be submitted automatically.

-If changing the choice, please press the new choice directly.
Support max. 10 options.
Make the single choice by pressing 0~9 (0 stands for 10/J)

-The digit or letter will be displayed on the LCD; the press will not
be valid after reaching the given options.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

FAST OPERATION MANUL S50

- If changing the choice, please press C key to clear, and then input
the new choices and press “OK” to submit.

l Sequence As above

Input continuously max.16 digit, including “_”, decimal& simple

l Number

l Blank-filling

l Fastest answer Press OK key to be the first answerer.

l Exam

3. Match up

Before using together with the base station, new keypads should be matched up with the base stations.
Firstly make the base station entering into match-up mode by operating the software, secondly press the
“M” and “.” buttons on the keypad simultaneously till it requires to enter password “ 112233”, then the
keypad can match up with the base station, and it has indication of successful or not.

4. Menu operate

Press “M” on the menu to enter into menu operate; press up and down button for page turning; press
number buttons to choose and operate menu.

5. Parameter configure

Press “OK” together with base station and software to read or write keypads ID.
Press “OK” together with base station and software to read or write keypads bound student ID & name.

symbol. Pressing input shift key transfer to symbol input. Finally
press “OK” to submit.
Input continuously max.16 letter, including simple symbol.
Pressing input shift key transfer to capital, lowercase, symbol, etc.
Finally press “OK” to submit.

Press the up and down button to choose different subjects.
Answer the subjects by inputting number or letter.
Pressing input shift key transfer to capital, lowercase, symbol, etc.
Finally press “OK” to store and shift to next topic.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn