Changsha SunSky Electronic Design and Development SUNVOTEKEYM5L Users Manual

M52Li-2.4G

Keypad User Manual

2016/04/20

Easy Use Quick Innovative

Content

1- Appearance Description

2-Preparation Work

3-System Connection

4-System Settings: Keypad Match, Set ID, Management

5- Voting Functions: Sign in, Vote, Judge, Choice, Sequence, Numeric

6-FAQ & Notes

1- Appearance Description

Model M52Li

Power On

Press any key to power on

Power Off

Long press 【C】 till "Bye Bye" appears on the screen, then
release your hand to turn it off

Sign In

Press 【OK】 to sign in, LCD will show “SignIn OK ” after

successful registration

Vote

Press【√】【X】【?】 for yes/no/abstain, and LCD will
show“Received” if successfully submit.

Candidate Election

Press 【√】to tick the candidate, double click 【√】or click 【X

】

for recall, and press 【OK】 to submit

Single Choice

Press alphanumeric keys to submit your answer directly

Multiple Choice

Sequence

Press alphanumeric keys to select your answer and press 【OK

】

to submit

Scoring

Numeric

Press alphanumeric keys to input the numbers including
decimal point and press 【OK】 to submit

LCD Display

Cancel

Down/Channel

UP/Decimal Point

Submit

Abstain

No

Abstain

Channel

Keypad ID

Alphanumeric
Keys

Online

CH:01 ID:0001

Yes

2-Preparation Work

Please check the keypad batteries before use. If battery is low (e.g. it prompts in red to

indicate weak battery by keypad test in the software), please plug the keypads into the

charging box for around 2-3 hours till fully charged.

Indication light of the charging box turns red
when keypad is charging;
The light turns off after full charge

300mAh Rechargeable Lithium Battery

Plug the Mini USB into the charging slot

XX Board Meeting

Session I

3-System Connection

1-Install

software

2-Connect base

station

4-Power on
keypads for

testing

3- Set up the

projector &

screen

No network connection is required in the
conference hall;
The projector and screen are prepared by
users.

4.1.1-System Settings ：Keypad Match-Match Mode

【 Why to Match】 Keypad match is to create communication between keypads and base station, and make sure your system is
isolated from other similar systems. Match mode is set by default from factory.
【 How to Match】 Please run SunVote ARS Tool Kit，go to Keypad Match and click “Start” after the base is connected.

Press 【 ↑ 】and 【 ↓ 】 at

the same time for 3 seconds

If failed, keypad will return
to the last matched channel.

For end-user, the keypads
and base station are
matched before delivery.

Matched

List the information of matched keypads

4.1.2-System Settings ：Keypad Match-Free Mode

【 Free Mode】 Keypad is able to communicate with any base station freely by inputting the appropriate channel of the base.

【 How to Set】 Free mode is controlled by base station. However the base is set as match mode from factory, we may change it

to free mode in SunVote ARS Tool Kit as shown on the bottom left.

When the free mode base is connected,

follow the steps as below :

Long press 【CH】 for 3 seconds, input

the correct channel when “Channel”

appears on the screen, and press OK to

connect .

It shows “Online” on screen after

successful match.

If failed, keypad will return to the last
matched channel.

For end-user, the keypads and base
station are matched before delivery.

Channel:

-

4.2- System Settings: Set Keypad ID

【 Why to Set ID】 Keypad ID is convenient for device management, test and troubleshooting. ID should be unique.
【 How to Set ID 】 Run SunVote ARS Tool Kit ，go to Keypad and click Start Setting. Now press and hold 【OK】 button on keypad, and

release your hand after a new ID showing on keypad and toolkit. New ID in ARS Tool kit will add 1 automatically, so please press another
keypad to set its ID in ascending order.

For end-user, ID is set
before delivery.

Note: “Match” means

match mode;

“Free” means free mode

[Match] Off:10

ID: 0005