Changsha SunSky Electronic Design and Development SUNVOTEBASE1X Users Manual
FAST OPERATION MANUL EA1000
EA1000 FAST OPERATION MANUL
Status LED
USB Port
Data LED
· The Status LED indicates the communication status with PC, when flash quickly, it
INDICATE LED
BASE STATION
CONNECTION
RADIO
CHANNEL SET
stands that it received the data from PC.
· When the Data LED light, it stands receiving data from keypad
· Connect the base station with PC USB port , the Status LED will flash every half
second if connection is successful.
· The Status LED will flash quickly after the software and base station communicate
normally.
· Initial installation, PC will automatically remind that have found new device and
install the drive automatically.
· After logging in application software, choose the new channel in the “ channel” of
“base station set”, then click “ set”.
· When using the multiple base station solution, the frequency channel of each base
station should be different, and it’s better not to set the neighboring channel
· Only when frequency channel is interfered or communication is not good, then you
need to consider changing and resetting the channel, usually you needn’t.
BASE STATION
TEST
After connetion is ok, power on keypads, then do keypads testing.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FAST OPERATION MANUL EA1000
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Loading...