User Manual
Product name: Aurga Camera Assistant
Model: Aurga C1
Features
Remote control DSLR camera to take shot
View/Manage photos on phone/camera
Transfer files between phone/camera/usb storage to SD card
Social Sharing
iOS/Android apps
Power Supply
5V USB power
App Downloading
Please visit the website (http://www.aurgadslr.com) to download the latest apps.
Usage
(a) Aurga Dock
(b) Aurga
Plug the Aurga⑤ into to Aurga Dock③
Power On: Press the Power button ① in 3 seconds, the battery LED ② and Wi-Fi LED ⑦
should be on.
Power Off: If the Aurga Docker is on, press the power button ① in 3 seconds,
Charge: Use phone adapter (5V USB output) as the charger, connect the charge cable to ④
Connect phone/tablet to Aurga:
In iOS, go to Settings -> Wi-Fi, connect the Hotspot Aurga-xxxxxx,
In Android, go to Settings -> Wi-Fi, connect the Hotspot Aurga-xxxxxx.
Run the mobile app Aurga on Android or iOS.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received,including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
FCC RF Radiation Exposure Statement
The SAR limit of USA(FCC) is 1.6W/kg averaged over on one gram of tissue.
Device types: ET1(FCCID: 2AMUA-AC1) has also tested against this SAR limit.
The highest SAR value reported under this standard during product certification for use at
the properly worn the the body is 0.773W/kg, To comply with RF exposure requirements, a
minimum separation distance of 0 cm.
And Customers can view more product certification information from the website (https://www.fcc.gov/)
radio or television reception,
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Loading...