The OSD and illustration in this manual may be somewhat different from the actual situation.
Please take the LCD TV as standard.
Important Safety Instructions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARD. In order to prevent potential danger, please observe the foll owing instructions when installing,
operating and cleaning the product. To ensure your safety and prolong the service life of your LCDT V
product, please read the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product
is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for
future reference.
3. Heed all warnings--- All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Attachments---Only use attachments/accessories specified by the manufacturer. Do not use
attachments not recommended by the manufacturer. Use of improper attachments can result in
accidents.
6. Power source---This product is intended to be supplied by a listed power supply indic ated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer
or local power company. For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system.
7. Power cord protection ---Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
9. Entering of objects and liquids---Never insert an object into the product through vents or openings.
High voltage flows in the product, and inserting an object can cause electric shock and/or short internal
parts. For the same reason, do not spill water or liquid on the product.
10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-sup ply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
11. Damage requiring service---If any of the following conditions occurs, unplug the power cord from the
AC outlet, and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into
the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the
operating instructions.
Do not touch the controls other than those described in the operating
instructions. Improper adjustment of controls not described in the
instructions can cause damage, which often requires extensive
adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
PAGE 1
f. When the product displays an abnormal condition or e xhibits a distinct change in perf ormance. Any
noticeable abnormality in the product indicates that the product needs ser v icing.
12. Replacement parts---In case the product needs replacement parts, make sure that the service person
uses replacement parts specified by the manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or
other danger.
13. Safety checks---Upon completion of service or repair work, request the service technician to perform
safety checks to ensure that the product is in proper operating condition.
14. Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer. This is a safety feature.
15. Stand---Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. Do not place the
product on an unstable trolley, stand, tripod or table. Placing the pr od uct
on an unstable base can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. When mounting th e
product on a wall, be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the manufacturer.
16. Careful move---When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over. Sudden sto ps,
excessive force and uneven floor surfaces can cause th e product to fall
from the trolley.
17. Lightning---Unplug this apparatus during lightning storms or when
unused for long periods of time.
For added protection for this television equipment during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage
to the equipment due to lightning and power-line surges.
18. Do not use this apparatus near water---for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
Do not use immediately after moving from a low temperature to high
temperature environment, as this causes condensation, which may
result in fire, electric shock, or other hazards.
19. Clean only with dry cloth---Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
20. Ventilation---Do not block any ventilation openings. Install in accordance
with the manufacturer instructions. The vents and other openings in the
cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/ or
shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer’s instructions are followed.
21.Heat sources---Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
22.Panel protection---The LCD panel used in this product is made of glass.
PAGE 2
Therefore, it can break when the product is dropped or impacted upon by
other objects. Be careful not to be injured by broken glass pieces in cas e
the LCD panel breaks.
23.Pixel defect---The LCD panel is a very high technology product, giving
you finely detailed pictures. Occasionally, a few non-active pixels may
appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
mportant Safety Instructions
Using the Remote Control
● Use the remote control by pointing it towards the remote sensor window
of the set. Objects between the remote control and sensor window may
prevent proper operation. Cautions regarding use of remote control
Note: the illustration is for your reference only, the remote sensor may
locate differently with different model.
Cautions regarding use of remote control
● Do not expose the remote control to shock. In addition, do not expose the remote control to
liquids, and do not place in an area with high humidity.
● Do not install or place the remote control under direct sunlight. The heat may cause
deformation of the unit.
● The remote control may not work properly if the remote sensor window of the main unit is under
direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or
operate the remote control closer to the remote sensor window.
Batteries for Remote Control
S
If the remote control fails to operate the LCDTV functions, replace the batteries in the remote control.
1 Open the battery cover. 2 Insert two size-AAA batteries. 3 Replace the cover and slide in
reverse until the lock snaps.
● Slide the cover while pressing
down.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
● Place batteries with their terminals corresponding to the (+) and (–) indications.
● Place the batteries with their
terminals corresponding to the (+)
and (-) indications in the battery
compartment.
PAGE 3
● Different types of batteries have different characteristics. Do not mix batteries of different types.
● Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
● Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a
rash. If chemical leakage is found, wipe with a cloth.
● The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
If the remote control is not used for an extended period of time, remove the batteries from the remote
control.
PACKING LIST
LCD TV 1
Operation Manual 1
Power Adapter 1(only TM150F7U)
AC Power Cable 1
Infrared Remote Control 1
Note:
Please keep the wrapping box and the padding well for future convenient use when
you convey them.
GENERAL INFORMATION
Radio Frequency input: it can store 181 TV channels
AV input: Convenient for watching a DVD player, VCE, video camera or other playback
devices.
S-Video input: Convenient of receiving a high quality component signal from a DVD
player
YPbPr input: Capable of receiving the high definition YPbPr signal in 480i, 480P, 576i,
MTS Stereo Decoding Function: Capable of identifying MTS automatically and
reproducing high quality stereo sound.
VGA input:
a. Convenient to connect with the host computer
b. Use as the display terminal
c. Connect the 3.5mm(diameter) audio jack to your computer’s soundcard to listen to
stereo sound transmitted from your home computer
Program & Child Lock: Capable of locking any program of the TV and the function
button of the front panel
Timer function
PAGE 4
Blue background with noise reduction: In TV/AV S-VIDEO and YPbPr modes,
screen displays soft blue background if there is no signal input
Multi Language On-Screen Display menu: Textand graphical user interface makes
menu operation user-friendly
Power Energy Saving Mode (Power management mode): When used as PC display
terminal without PC signal output, the LCD TV will automatically power off within 30
seconds and enter into the Power Energy Saving Mode. It will automatically work again
when it received a signal from the PC. To start the TV manually with no signal press the
number buttons or /CH+/CH- on the remote control.
Plug and Play: No additional software is needed when the product is used as computer
terminal display
Automatic picture quality automatically
Zoom mode: Full-screen, 16:9, film, subtitle
Low power consumption
Picture enhancement function
High definition display panel
Dynamic comb filter
Headphone output
CCD Function
MACROVISION auto identification function
PAGE 5
BRIEF INTRODUCTION
Front Panel
The button names and functions are as follows:
Panel buttons
Button Description
【SOURCE】
【MENU】
【VOL-】
【VOL+】
【CH-】
【CH+】
【 】
To switch between TV, AV, S-Video,YPbPr, and PC signal sources.
The same function to【SOURCE】on R/C in menu operation.
To enter or quit from the OSD (On-Screen Display) menu.
The same function to【MENU】on R/C
To decrease the sound volume. Adjust functions in menu operation. The same
function to【Vol-】on R/C
To increase the sound volume. Adjust functions in menu operation. The same
function to【Vol+】on R/C
1. In TV mode, decrease the channel number
2. To select functions in menu operation.
3. The same function to【CH-】on R/C
1. In TV mode, increase the channel number
2.To select functions in menu operation.
3.The same function to【CH+】on R/C
To power on or put the LCD TV to STANDBY
The same function to【
】on R/C
Note:
In this operation manual, 【】symbol means Button.
PAGE 6
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.