Changhong Electric PT4216, PT5016 Operation Manual
PDP COLOR TELEVISION
PT4216
PT5016
OPERATION MANUAL
Please read this manual carefully before operation.
CONTENTS
SAFETY PRECAUTIONS,MAINTENANCE AND INSTRUCTIONS ................................... 1
PACKING LIST.................................................................................................................... 4
GENERAL INTRODUCTION............................................................................................... 5
BRIEF INTRODUCTION ..................................................................................................... 6
REMOTE CONTROL........................................................................................................... 9
INSTALLATION ................................................................................................................. 11
GENERAL OPERATION ................................................................................................... 11
MENU OPERATION .......................................................................................................... 12
FUNCTION INTRODUCTION............................................................................................ 12
Using the Channel Setting Menu ................................................................................... 12
Using the Picture Setting Menu...................................................................................... 14
Using the Audio Setting Menu........................................................................................ 14
Using the General Setting Menu .................................................................................... 15
Using the Timer Setting Menu........................................................................................ 16
Using the Child Lock Setting Menu ................................................................................ 16
Using the PC Setting Menu............................................................................................ 17
OTHER FUNCTIONS INTRODUCTION............................................................................ 18
Standby Mode ................................................................................................................18
Signal Switch.................................................................................................................. 18
Channel Selection .......................................................................................................... 18
Volume Control............................................................................................................... 18
Mute ............................................................................................................................... 18
Sound Mode Selection ................................................................................................... 19
Picture Mode Selection .................................................................................................. 19
Information Display ........................................................................................................ 19
Sleep Function ............................................................................................................... 19
Recall ............................................................................................................................. 19
Zoom Mode .................................................................................................................... 19
Still.................................................................................................................................. 19
Orbiter ............................................................................................................................ 19
PIP/POP/PBP Function.................................................................................................. 19
TROUBLESHOOTING ...................................................................................................... 21
SPECIFICATIONS ............................................................................................................. 22
INSTALLATION MANUAL OF THE SOUND BOXES ...................................................... 24
Note:
The OSD and illustration in this manual may be somewhat different from the actual situation.
Please take the PDP TV for standard.
PT4216 PT5016
PAGE 1
SAFETY PRECAUTIONS, MAINTENANCE AND INSTRUCTIONS
Dear Customer,
Thank you for your purchase of the PDP Color TV. To ensure your personal safety and
prolong the life of your product, please read all through all the safety and operating
instructions and adhere to the instructions strictly. Our company will not be held liable for
any accidents occurred by non-adherence to the safety precautions and instructions in the
manual.
Safety Precautions
WARNING
Ⅰ.Please unplug the power cord from the AC outlet and contact service personnel to
repair under the following conditions, or it may result in fire or electric shock
1. Any obvious abnormality of the product such as smoke, abnormal odor or sound
emitting from the product, please contact the service personnel. To avoid any hazards
do not attempt to repair it.
2. Liquid being spilled or metallic objects penetrated into the product.
3. No image or sound.
4. Cracked cabinet cover due to fall or collision.
5. The product cannot operate even though all the operating instructions are followed.
Warning : This TV should only be serviced by an authorized and properly trained
technician. Opening the cover or other attempts by the user to service this TV may
result in serious injury or death from electrical shock, and may increase the risk of
fire.
Ⅱ Protect the power cord and plug to reduce risks of fire hazard or electric shock
1. Do not place heavy foreign objects on the power cord.
2. Affix the power cord with nails.
3. Attach or remove power cord with care. Do not damage, change, bend, twist, pull or
heat the power cord.
4. When the power cord is damaged or frayed, please contact the service personnel.
5. If the metal plug cannot be fully inserted into the receptacle or the receptacle is too
large for the plug, please replace the power receptacle to avoid fire hazards.
Ⅲ Precautions on the environment of PDP TV
1. Do not place liquid container and small metal things such as vase, flowerpot, glass,
cosmetic or medical bottle near the product. Should they drop into the product, it may
result in fire or electric shock.
2. Do not place candle, kerosene light near the product, or else it may cause fire hazard.
3. Do not place the product on an unstable stand or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the product.
4. Do not use the TV set near water- for example, near a window, bathroom, and the like,
or else it may result in fire or electric shock.
Ⅳ Things to comply when using PDP TV
1. Do not try to open the cabinet cover, service or change the product. For the product is
high in voltage, it may cause fire hazard or electric shock. Should replacement parts be
PT4216 PT5016
PAGE 2
required, please contact the local service agent.
2. Be sure to use the accessories sold with the product or recommended by the
manufacturer. If not, it may result in hazards.
3. Never push objects of any kind (mental, tinder, etc.) into the product through the slots,
or it may result in fire or electric shock.
4. When many electric appliances are sharing one electric board, the total power of all
the electric appliances cannot surpass the rated power of the electrical plug and power
cord or it may result in fire hazards.
5. Do not touch the power plug when thundering.
6. The TV set should be operated only with the type of power source indicated on the TV
set, or it could cause fire or electric shock.
7. Please cut off the power at any time when the electric current is unstable.
8. Power cord, plug and receptacle with dust, impurity and dirt in the state of moisture
may cause fire. Please clean regularly.
Ⅴ Precaution and instruction for installing the outdoor antenna
1. The outdoor antenna should be installed firmly and provided with some insulation
against thundering.
2. An outdoor antenna system should not be located in the vicinity of overhead power lines
or circuits to reduce risks of fire or electric shock.
ATTENTION
Ⅰ Precautions on the environment of PDP TV
1. The apparatus shall be connected to MAINS socket outlet with a protective earth
connection.
2. Do not put the product in a place subjected to moisture, smoke or dust.
3. Do put the product in a place with good ventilation, away from direct or strong light, high
temperature and moisture. The temperature for placing the product is -20℃~50℃, and
the temperature for using the TV set is 0℃~40℃. If not, it may cause permanent
damage to the TV set.
4. Do not block the slots or openings. If internal temperature builds up, it may result in fire.
Keep children or others who are sensitive to the temperature away from the heat slots.
5. Do not place the TV set by side or by opposite Do not put the TV set in the narrow place
such as closet, book cabinet and so on.
6. Do not place the product on a bed, sofa, rug, or other similar surface.
7. Do not tilt the TV set. It may fall, causing serious injury to a child or adult, and serious
damage to the TV set.
Ⅱ Precautions and instruction on power cord of PDP TV
1 Make sure wires are grounded to reduce the hazards. Do not use AC electrical power with
grounding wire that is unstable.
2.The power cord should not be put close to a heat source, or the cover of the power cord
will melt and may cause the fire.
3.Do not touch the metal part of the plug when attaching to or detaching from the receptacle,
hold the plastic part of the plug, not the power cord to remove, or else it may break and
cause danger.
4.Do not touch the plug when your hand is wet, or it may result in electric shock.
Ⅲ Make sure that the power cord is pulled out from the AC power before service.
Ⅳ Make sure that all the connection wires have been detached from the TV set before
PT4216 PT5016
PAGE 3
moving it.
Ⅴ If the TV set is not going to be used for a long period of time, pull out power cord
from AC electrical net to avoid hazard. Do not turn on the TV set and pull out the plug
during lightning storm.
Ⅵ Before turning on the TV set which is put in a place below 0°C for a long period of
time, do check if there is water in the TV set. If so, dry it before turning on it.
Otherwise, it will damage the TV set.; Before turning on the TV set which is removed
from a cool place to a warm place ,do let it rest for one or two hours on account of
acclimatization
Ⅶ. Do operate the TV set according to the manual. Improper adjustment or operations
may damage the TV set. For further advice, please contact the local service agent.
Ⅷ When the PDP TV reaches the end of its useful life and needs to be disposed,
please contact the qualified service technician to deal with it. Improper disposal
could result in panel implosion and cause hazards.
Ⅸ The MAINS plug or an appliance coupler of the apparatus is used as the
disconnect device, the disconnect device shall remain readily operable.
INSTRUCTIONS
1. Don’t LEAVE a STATIC image on the screen for a long period of time, especially when
nobody watches it.
Caution: Using video games or any external accessory with fixed images for over 10
minutes can cause them to be permanently imprinted on the SCREEN. ALSO, some
network/program logos, phone numbers, teletext, images in 4:3 format etc. may
cause similar damage. This damage is not covered by your warranty.
2. As there is some electric charge built up on the panel, a feeling of slight discharge will be
felt upon contact with the panel.
3. Do cut off power before cleaning the TV set. Do not use liquid cleaners or aerosol
cleaners. Do use damp and soft cloth or cleaners meant for the panel. Before the panel
dries, please do not turn it on. Do not use volatile things to clean the TV set, for
these things may damage the cabinet cover or panel of PDP TV.
4. Be careful when moving the TV set. Do not push with excessive force or touch the panel
with bare hands. Do not hit the cover or the panel, or it may cause mechanical damage
to the TV. Do not press on the panel or let any hard objects touch the panel to avoid
damage to the panel. Unduly extrusion will cause the permanent damage to the
panel.
5. Please use soft cloth to clean the cabinet cover of PDP TV. If it is very dirty, a tweaked
soft cloth can be used with attenuant litmusless scour to clean the TV set, then dry it with
a dry soft cloth.
6. Do not spray volatile things such as alcohol, petrol, pesticide on the panel, and do not
make cover with rubber, adhesive tape for a long time, or the paint will drop and damage
the cabinet cover.
7. Do not water, press, drop or open the remote controller. Use eligible batteries. Do not
mix new batteries with old ones in the remote controller. Do not put the battery into the
fire or decompose the battery. Please take out the battery from the remote controller if it
is not used for a long time or the battery will exhaust. Otherwise, the battery may leak
and damage the remote controller.
PT4216 PT5016
PAGE 4
8. The best viewing angle and position: The center of panel is slightly lower than height of
your eyes, distance should be five or seven times further than the height of the panel.
The environmental brightness should comfortable enough to read newspapers.
9. Proper volume adjustment. Do not turn up the TV volume too loud when watching TV at
night or it will affect the neighborhood.
10. To prolong the PDP TV’s usage longevity, please do not turn it on/off too often！Turn it on
3 minutes later as you turn it off by pressing
【 】on the panel or unplug the power cord
from the AC outlet.
11. Working condition of the product:
Temperature: 0℃~40℃
Humidity: 20%~80%
Height above sea level for using the product: 0~2000m
Note: Due to ongoing upgrades all the On Screen Displays and illustrations in this manual
may be somewhat different from the actual situation. Please take the ones on the
PDP Colour TV as the standard.
PACKING LIST
Attachments for PDP TV
PT4216/5016 PDP TV
1
Operation Manual
1
Power Cable
1
Audio Convert Cable
1
Remote control
1
AAA Batteries
2
Connection Cable for Sound Boxes
2
Sound Box
2
Installation Manual of Sound Boxes
1
Attachments for pedestal (optional)
Steel of the Pedestal 1
Cover of the pedestal 1
Stanchions 2
Screw 20
Installation Manual of the Pedestal 1
Attachments of the Wall Mount Kit (optional)
Wall Mount Kit 1
Screw 20
Installation Manual of the Wall Mount Kit 1
Note:
Please keep the wrapping box and the padding well for future convenient use when you
convey them.
PT4216 PT5016
PAGE 5
GENERAL INTRODUCTION
Radio Frequency input; support CATV
Capable of receiving the full-append cable programs in 470MHZ
AV input
Capable of receiving PAL, NTSC, SECAM color systems; Convenient to watch VCR
(video cassette recorder), Pickup Camera, other Disc’s programs
AV output
Capable of transmitting AV of different systems to other AV receivers through the
current AV cable
Y/C component signal input (same to S-Video input)
Convenient to receive the Y/C high definition component signal from DVD
HDTV input
Capable of receiving the high definition YPbPr signal in 480i, 480p, 576i, 576p, 720p,
1080i, and 1080p formats
PC input
a. Connecting with the host computer
b. Use it as a display terminal
c. Connect the 3.5mm(diameter) audio cord to your computer’s audio main board,
music can be transmitted from the host computer
DVI input
Convenient to receive DVI signal
PIP, POP, PBP function
Program ＆ Child Lock
Turn on with intelligence
Zoom mode
LTI, CTI, and black level expansion
BBE sound technology
Trusurround sound technology
Fleshtone enhancement and improvement
3:2, 2:2 Pull Down
TV program scan function
Timer function
Automatically on/off at certain preset time
Blue background without signal
In TV, ,AV1,AV2 and YPbPr modes, screen displays soft blue background if there is no
signal input
Auto Off if no signal input
In TV mode, the PDP TV will automatically power off within 15 minutes and enter into
the Standby Mode if there is no signal input.
Multi Language On-Screen Display menu
Ordinary and graphical user interface makes the menu operation more user-friendly
Power energy saving mode (power management mode)
In PC/DVI mode, the PDP TV will automatically power off within 15 seconds and enter
into the Power Energy Saving Mode if there is no VGA/DVI signal input. It will
automatically exit from the Power Energy Saving Mode and power up again when it
received a valid VGA/DVI signal or press any button on the panel/remote control.
Plug and Play
No installation software is needed to use the TV as computer terminal display
equipment
PT4216 PT5016
PAGE 6
Auto adjustment
Adjust the picture’s quality automatically
No flicker, no radiation, environment-protective and healthy
Legerity, convenient, low power consumption
Auto pixels motion function, which can prolong usage of the display panel
BRIEF INTRODUCTION
Front Panel Magnified buttons：
Button definition and functions：
Name Description
【CH+】
1. In TV mode, increase channel number
2. To select functions in menu operation
【CH-】
1. In TV mode, decrease channel number
2. To select functions in menu operation
【VOL+】
To increase the sound volume
To adjust functions in menu operation
【VOL-】
To decrease the sound volume
To adjust functions in menu operation
【MENU】
To enter or exit the OSD (On-Screen Display) menu
To browse the OSD menu
【TV/AV】
To switch between TV, AV1, AV2, YPbPr, PC, and DVI modes
The same function to【OK】on R/C in menu operation
PT4216 PT5016
PAGE 7
【 】
To turn the PDP TV on or enter into STANDBY
The same function to【 】on R/C
Remote Sensor Receive the signal from the remote control
Power indicator
light
1.Red light, means the system is under Standby status；
2.Green light, means the system is under normal working
status；
3.Flicker light, means the system is turning on or off.
Note：
In this operation manual, 【】symbol means Button.
Rear Panel
(PT5016)
Rear Panel (PT4216)
Name Description
Power Socket AC Power input jack
Signal input/output
terminal
Including TV input, headphone output, AV output, AV input.
Please find the Picture 1 as below
Loading...