Chaney Instrument ATLASTX User Manual

Instruction Manual
AcuRite® Atlas™
Outdoor Device
model 06059
How It Works
AcuRite® Atlas™ is an environmental monitoring station that delivers key information on current outdoor conditions at its installation location. The outdoor device contains sensors that read temperature, humidity, wind speed and direction, rainfall, UV, light intensity, and optionally lightning (requires optional Lightning Detection Sensor; may be purchased separately). These readings are transmitted over a 433 MHz wireless radio frequency to be received by the AcuRite Atlas indoor HD display and/ or AcuRite® Access™. Readings received by AcuRite Access can be monitored and viewed online from My AcuRite. Receivers may not be included, and may be purchased separately.
Set Up Your AcuRite® Atlas
Verify Package Contents Install BatteriesDevice Components
1 2
AcuRite Atlas outdoor device
1.
2. Mounting bracket
(for optional use)
1.
2.
3. Mounting anchors & screws
(for optional use)
4. Lightning Detection Sensor
(optional; may be purchased separately)
3.
4.
1. Wind speed anemometer
2. Mounting knob
3. Battery compartment
4. Solar cell
1
2
5. Bubble level
6. UV and light sensor
7. Rainfall collector
8. Wind direction vane
8
7
6
5
4
Open the battery compartment, and insert four (4) AA alkaline or lithium batteries. Lithium batteries are recommended in low temperature conditions, especially below -4°F (-20°C).
Note: Heavy duty or rechargeable batteries are not recommended.
2 3
3
Loading...
+ 3 hidden pages