Chaney Instrument 06044TX User Manual

Limited 1 Year Warranty

We expressly disclaim all liability for special, consequential,

from any breach of this warranty. Some states do not allow the

Canada, please consult the policies applicable to the country in

dispute relating to this Policy shall be brought exclusively in the

Customer Support

AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this

product available and contact us in any of the following ways:

Instruction Manual

Indoor Temperature &

(877) 221-1252

Visit us at www.AcuRite.com

► Installation Videos ► Register your Product ► Instruction Manuals ► Support User Forum ► Replacement Parts ► Submit Feedback & Ideas

IMPORTANT

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

AcuRite is a wholly owned subsidiary of Chaney Instrument Company. For purchases of AcuRite

products, AcuRite provides the benets and services set

forth herein. For purchases of Chaney products, Chaney

provides the benets and services set forth herein.

We warrant that all products we manufacture under this warranty are of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one year from the date of purchase.

Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by us, and at our sole option, be repaired or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser. We hereby disclaim all responsibility for such transportation costs and charges. This warranty will not be breached, and we will give no credit for products which have received normal wear and tear not affecting the functionality of the product, been damaged (including by acts of nature), tampered, abused, improperly installed, or repaired or altered by others than our authorized representatives.

Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not feasible, we may, at our option, refund the amount of the original purchase price

THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Printed in China

06044 INST 030116

PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

►

or incidental damages, whether arising in tort or by contract

exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

We further disclaim liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all liability for the

consequences arising from their use or misuse. No person, rm

or corporation is authorized to bind us to any other obligation or liability in connection with the sale of our products.

Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights

are the property of their respective owners. AcuRite uses patented technology.

Visit www.AcuRite.com/patents for details.

Furthermore, no person, rm or corporation is authorized

to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours.

In no case shall our liability for any claim relating to our products, your purchase or your use thereof, exceed the original purchase price paid for the product.

Applicability of Policy

This Return, Refund, and Warranty Policy applies only to purchases made in the United States and Canada. For purchases made in a country other than the United States or

which you made your purchase. Additionally, this Policy applies only to the original purchaser

of our products. We do cannot and do not offer any return, refund, or warranty services if you buy products used or from resale sites such as eBay or Craigslist.

Governing Law

This Return, Refund, and Warranty Policy is governed by the laws of the United States and the State of Wisconsin. Any

federal or State courts having jurisdiction in Walworth County, Wisconsin; and purchaser consents to jurisdiction within the State of Wisconsin.

Humidity Sensor

model 06044

Features & Benets

1 32 4

FRONT OF SENSOR

1. Indoor Temperature

Arrow icon indicates direction temperature is trending.

. Wireless Signal Indicator

Flashes when data is being sent to the companion unit.

. Humidity Level Indicator

Indicates a high, low or ideal indoor humidity level.

4. Indoor Humidity

Arrow icon indicates direction humidity is trending.

5. Channel Indicator

Sensor Low Battery Indicator

BACK OF SENSOR

7. A-B-C Button

Press to select A-B-C channel.

8. Integrated Hang Hole

For easy wall mounting.

9. Co/Fo Button

For selecting temperature units.

10. RESET Button

Full reset to factory defaults.

11.

Battery Compartment

12.

Battery Compartment Cover

(not shown)

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

987

SETUP

Install or Replace Batteries

AcuRite recommends high quality alkaline batteries in the sensor for the best product performance. Heavy duty or rechargeable batteries are not recommended.

1. Slide off the battery compartment cover.

2. Insert 2 x AAA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.

3. Replace the battery cover.

Install Batteries

2 AAA Batteries

Set the A-B-C Channel

The A-B-C button is located on the back of the sensor, above the battery compartment. Press and release to set channel to A, B or C (shown on the sensor display’s channel

indicator).

NOTE:

If being used with a companion product that has an A-B-C channel, you must select the same letter choice for both the sensor and the product it is being paired with in order for the units to

synchronize.

A-B-C Channel

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of the sensor is critical to the accuracy and performance of this product.

Sensor Placement

The sensor is designed for indoor use. Place the sensor in a dry area free of dirt and dust. Sensor stands upright for tabletop use and is wall-mountable.

Important Placement Guidelines

• To ensure accurate temperature measurement, place sensor out of direct sunlight and away from any heat sources.

• Sensor must be within 330 ft (100 m) of companion unit (not included).

• To maximize wireless range, place sensor away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place sensor at least 3 ft (0.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).

For more information, visit our Knowledge Base at http://www.AcuRite.com/kbase

Specications

TEMPERATURE RANGE: HUMIDITY RANGE: BATTERY REQUIREMENTS: WIRELESS RANGE OPERATING FREQUENCY

-4°F to 158°F; -20°C to 70°C 1% – 99% RH (relative humidity) 2 x AAA alkaline 330 ft / 100 m depending on home construction materials

433 .92MHz

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interf erence caused by unauthorized modications to this equipment. Such modifications could void the user authority to operate the equipment.

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.